I have noise in the dial tone in all extensions
Everything else works well
I change cpu board and it works fine.
any suggestions for repair
Thanks.
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/
| i...@genius.gr
- Original Message -
From: "Raymond Martin"
To: "'Jim Schultz'"
Cc:
Sent: Thursday, January 08, 2009 3:27 AM
Subject: Re: KX-T: KX-TD1232 strobes on XDP port
> Thanks Jim!
>
> Where is parallel extension in the programming sof
: Raymond Martin; kxt@kxthelp.com
> Subject: Re: KX-TD1232 strobes on XDP port
>
> Half way there..disable XDP and set for parallel extension...
>
> Jim
>
> - Original Message -----
> From: "Raymond Martin"
> To:
> Sent: Wednesday, January 07, 2009
D1232 strobes on XDP port
Half way there..disable XDP and set for parallel extension...
Jim
- Original Message -
From: "Raymond Martin"
To:
Sent: Wednesday, January 07, 2009 6:00 PM
Subject: KX-T: KX-TD1232 strobes on XDP port
> HI,
> Trying to set up strobes on a 1232.
If XDP is off, you must program the extension for parallel ring. It is off
by default.
-Original Message-
From: kxt-boun...@kxthelp.com [mailto:kxt-boun...@kxthelp.com] On Behalf Of
Raymond Martin
Sent: Wednesday, January 07, 2009 3:01 PM
To: kxt@kxthelp.com
Subject: KX-T: KX-TD1232
Half way there..disable XDP and set for parallel extension...
Jim
- Original Message -
From: "Raymond Martin"
To:
Sent: Wednesday, January 07, 2009 6:00 PM
Subject: KX-T: KX-TD1232 strobes on XDP port
> HI,
> Trying to set up strobes on a 1232. In the old 1232
HI,
Trying to set up strobes on a 1232. In the old 1232-11D we just set up
parallel extension in the programming and ran a duplex modular jack into the
wall plate. After moving to the KX-TD1232 this no longer worked.
The Wheelock strobes will work if plugged directly into the extension jack
with
years in business and there is a billing field that is
FL> populated on the PRI form in the switch. Your problem could stem from that.
FL> Some companies do populate it, others don't. Brad
FL> -Original Message-
FL> From: [EMAIL PROTECTED]
FL> [mailto:[EMAIL PROTECTED] On Beha
04, 2008 11:30 PM
> To: KXT help List
> Subject: Re: KX-T: KX-TD1232-6 CLIP
>
> KX-TD290, KX-TD1232-6 dual cabinets.
>
> We now have several companies sharing the above PBX.
>
> I'm trying to find a way to set it up so the outgoing caller ID (CLIP)
> is controlled by t
KX-TD290, KX-TD1232-6 dual cabinets.
We now have several companies sharing the above PBX.
I'm trying to find a way to set it up so the outgoing caller ID (CLIP)
is controlled by the extension (station) that calls out, rather than the
CLIP number associated with the channel that happens to be t
Will the IC19 chip make any improvement when calls come in and go out on
a PRI line (KX-TD290)?
The situation is we have a customer calling in, we then call and
conference in a remote consultant. Sometimes the remote consultant
cannot hear the customer (original caller).
Finn
Finn Lassen
Depu
You will not be able to use a 7453 remotely at all.
But you can use VOIP adapters to remote a single-line phone extension.
The MultiTech MVP210 is one unit I have used.
You will need 2, one at each end, and you will have to figure out your
network connections. I use Netgear VPN routers and a dynam
We have a KX-TD1232. I need to be able to provide a connection to an
extension to someone at a remote site:
the 1232 is in San Diego, CA
the remote user is in Omaha, NE
Does anyone have an idea of how I can place a KX-T7453 in Omaha and
connect it to the 1232 in San Diego?
--
Danke schön!
R
hwish I had managed to "obtain" a few of
those sets.
Jim
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc:
Sent: Wednesday, January 09, 2008 7:35 PM
Subject: Re: KX-T: KX-TD1232 & TVS75 strange noises
>
>
> In a message
In a message dated 1/9/2008 4:51:53 P.M. Eastern Standard Time,
[EMAIL PROTECTED] writes:
You know your old when: You can modify a 2500 set for a lead control
Better yet, do you remember how to wire an exclusion key data telephone?
Steve L. Martin
Pres./CEO
_Surf Side Sound, Inc._ (
HA HA HA
Doing this for too many years !
Wolfgang
NTC
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Ross L.
Sent: Wednesday, January 09, 2008 4:48 PM
To: kxt@kxthelp.com
Subject: Re: KX-T: KX-TD1232 & TVS75 strange noises
You know your old
To: <[EMAIL PROTECTED]>; "'Ross L.'" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>;
Sent: Tuesday, January 08, 2008 3:13 PM
Subject: Re: KX-T: KX-TD1232 & TVS75 strange noises
> Excellent tip Wolfgang!
>
> Some older (very old???) 2500 style set
hat very well might overload a port.
Jim
- Original Message -
From: "Wolfgang" <[EMAIL PROTECTED]>
To: "'Ross L.'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
Sent: Tuesday, January 08, 2008 5:38 PM
Subject: Re: KX-T: KX-TD1232 & TVS75 s
kxt@kxthelp.com
Subject: Re: KX-T: KX-TD1232 & TVS75 strange noises
If you short the data pins of any extension connected to the switch it will
affect all other extensions. I found that one out while I was trying to
isolate a problem on a kxtd1232. I would guess that you have a wiring
problem for one
ly a short or something that I'm missing.
Good luck!
--Brian
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of David Jeter
> Sent: Tuesday, January 08, 2008 3:33 PM
> To: kxt@kxthelp.com
> Subject: KX-T: KX-TD1232 & TVS75
the switch will stop your phones from going crazy. It might take a while to
find that problem child. Especially if it is intermitten.
- Original Message -
From: "David Jeter" <[EMAIL PROTECTED]>
To:
Sent: Tuesday, January 08, 2008 12:33 PM
Subject: KX-T: KX-TD1232 &
sday, January 08, 2008 3:33 PM
Subject: KX-T: KX-TD1232 & TVS75 strange noises
>
>
> We have a client that has a KX-TD1232 & TVS-75 installed in their home. We
> did not do the original install, and it was up and running when they
> bought
> the house. There has been a stra
We have a client that has a KX-TD1232 & TVS-75 installed in their home. We
did not do the original install, and it was up and running when they bought
the house. There has been a strange occurrence the past several weeks, and
it seems to be random, but happens mainly in the evening, says the cli
kx-td1232 with pri card and kx-tda100 with pri card
We need to call from one system to the other one as
one system, distance beetwen systems: about 4
blocks--- i have 4 copper pairs to make the neccesay
connetion
i just need to know if i can
connect in a distance of 4 blocks, if i need a signa
John Burk wrote:
> All -
>
>
> Question - Is it possible to have the ARS auto select a CO in a 4 member
> trunk group for the least idol line, so each of the lines get used at
> random?
>
>
> Purpose - These are Vonage lines and I want to try to put equal quantity of
> calls out on these
All -
Question - Is it possible to have the ARS auto select a CO in a 4 member
trunk group for the least idol line, so each of the lines get used at
random?
Purpose - These are Vonage lines and I want to try to put equal quantity of
calls out on these lines because i'm capped 500 minutes
d1232 - 0 did not have it, -1 had it..
-larry
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
ultz" <[EMAIL PROTECTED]>
Cc: "Jim McAtee" <[EMAIL PROTECTED]>;
Sent: Wednesday, April 18, 2007 5:52 PM
Subject: Re: KX-T: KX-TD1232 Clock Synch
> On Wed, 18 Apr 2007 17:44:33 -0400, you wrote:
>
>>The system requires at least one line with CID for the clock
It just uses whatever time the CO sends along
Be aware you need to install a CID card as well. They didn't include one
until the -7 revision.
Jim
- Original Message -
From: "Jim McAtee" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, April 18, 2007 6:04 PM
Subject
timezone?
Jim
- Original Message -
From: "Jim Schultz" <[EMAIL PROTECTED]>
To: "Jim McAtee" <[EMAIL PROTECTED]>;
Sent: Wednesday, April 18, 2007 3:44 PM
Subject: Re: KX-T: KX-TD1232 Clock Synch
> The system requires at least one line with CID for the clock upd
On Wed, 18 Apr 2007 17:44:33 -0400, you wrote:
>The system requires at least one line with CID for the clock update feature
>to work.
>Jim
I was just checking my "Feature List Per Version" and see that it's
not listed as an added feature. Was it available from the beginning?
-Joe
--
Joe Childs
The system requires at least one line with CID for the clock update feature
to work.
Jim
- Original Message -
From: "Jim McAtee" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, April 18, 2007 5:33 PM
Subject: KX-T: KX-TD1232 Clock Synch
>I noticed the thread several wee
I noticed the thread several weeks ago regarding KX-TD1232 and daylight
savings time and meant to follow up. I wasn't aware that the system could
synch its clock with an outside source. Is this possible with the system
and the phone lines that we have? If so, how?
KX-TD1232-4
KX-TVS200
Six anal
Carefully remove all the brown glue around the small crystal near the
center of the cpu board. cleam thoroughly, the leads probably have
corrosion and might not survive. protective clear coat the area after.
toothbrush, toothpicks, 99% iso alcohol are good.
-or-
replace the crystal
-larry
The clock on one of my older 1232 has stopped is there an easy way to fix
problem.
Thanks
Ken
** AOL now offers free email to everyone.
Find out more about what's free from AOL at http://www.aol.com.
I found that cutting a piece of foam and placing it over the 25 pr.
connector, works just as well as the cable ties. It squishes the 25 pr.
connector when the door closes.
Thanks,
Marc Halberg
The Phone Man
5666 La Jolla Blvd. #303
La Jolla, CA 92037
(619) 528-1900 x101
800-878-PHON
(619) 563-46
uot;Paul H. Gusciora" <[EMAIL PROTECTED]>
>To: "KX-T Help"
>Sent: Tuesday, March 20, 2007 1:06 AM
>Subject: KX-T: KX-TD1232 Nylon Cable Retainers
>
>
>> Hello all:
>>
>> The KX-TD1232 has three nylon cable retainers for the station cables.
>
ectronics, cars, movies, books, food
and more, see http://gottaget1.blogspot.com
- Original Message -
From: "Paul H. Gusciora" <[EMAIL PROTECTED]>
To: "KX-T Help"
Sent: Tuesday, March 20, 2007 1:06 AM
Subject: KX-T: KX-TD1232 Nylon Cable Retainers
> Hello
Hello all:
The KX-TD1232 has three nylon cable retainers for the station cables.
Two wrap over each of the two internal station cable plugs. These
retainers are in two parts that pop into blind holds on either side
of the plugs. The third cable retainer is a single piece that wraps
around all
I had that problem with one system, it always occurred in the late afternoon.
After running many tests, I suspected something might be shorting out
an extension line.
They were using many existing wire runs in their building.
All the digital phones were working ok, so I suspected one of the
analog
Also, get a good battery backup and put both cabinets on it, if you
haven't done that already.
cp
On 1/17/07, Charles Patterson <[EMAIL PROTECTED]> wrote:
> I had that problem with one system, it always occurred in the late afternoon.
>
> After running many tests, I suspected something might be s
I had a similar case a while back. It looked like a power problem. It turned
out to be an expansion module on the first cabinet.
Steve
- Original Message -
From: "Russ Schultz" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, January 17, 2007 4:28 PM
Subject: KX-T: KX-TD1232
I would like to throw another question out to the group. You guys were so
helpful and quick to respond to my last question. (Don't think of it as pure
flattery -- more as a challenge!)
I have two KXTD1232s tied together - one has two extension expansion cards
and is pretty loaded, while the seco
I would like to throw another question out to the group. You guys were so
helpful and quick to respond to my last question. (Don't think of it as pure
flattery -- more as a challenge!)
I have two KXTD1232s tied together - one has two extension expansion cards
and is pretty loaded, while the seco
We can take a look at the bad KX-DT1232-1 to see if it is worth
repair. If it is not worth repair there is no charge to look at it.
We also have KX-td1232 all versions in stock if you need a
replacement.
John Almont
Communicator Tel Inc.
800-777-1036
_
At 02:54 AM 5/22/2006, [EMAIL PROTECTED] wrote:
>
>
>Well, I just figured out a piece of the puzzle!
>
>It appears that my second CO line, which is actually an AT&T CallVantage
>VoIP line, is sending out false CID info!
>
>If my first call after 3AM is on my land-line, my CID is correct for the
>d
the Public Utilities Commission in your state has a lot of
power too.
Michael Karaman
The Phone Network, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Monday, May 22, 2006 2:54 AM
To: kxt@kxthelp.com
Subject: Re: KX-T: KX-T
off the auto-time-set feature . . .
Orrin
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of
[EMAIL PROTECTED]
Sent: Sunday, May 21, 2006 2:40 PM
To: kxt@kxthelp.com
Subject: KX-T: KX-TD1232 CID Time Reset
Hello!
I am having a strange problem wi
] On Behalf Of
[EMAIL PROTECTED]
Sent: Sunday, May 21, 2006 2:07 PM
To: [EMAIL PROTECTED]
Cc: kxt@kxthelp.com
Subject: Re: KX-T: KX-TD1232 CID Time Reset
The manual says it's at 3 am, but it shouldn't be setting to January 1!
The 990 parameters for Area 5 were set to "111
TECTED] writes:
CID resets the time after 1am from the CO. Check the system 990 parameters
to see how it is set.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Sunday, May 21, 2006 2:40 PM
To: kxt@kxthelp.com
Subject: KX-T
Hello!
I am having a strange problem with a KX-TD1232-6!
If I program the system to automatically set the time from Caller ID
(Program 990, Area 05, Bit 1), The system soon resets the entire clock to 12:00
January 1 2006! Of course, this screws up all of the Day/Night Mode settings!
Th
My mistake I meant to say FTXD and FTXA, whoops!
Donald R. Resor
Los Angeles, California
Michael Karaman
Tue, 28 Mar 2006 04:50:15 -0800
If the call is on hold by the TVS, then there is no music. But if the KSU
has the call on hold, music is played. Thus when you dial an extension and
it is
I know this is from the archives and may not apply, as this was
originally for a KXTD1232 but with my own experimentation of a TVS200
upgraded to a TVS225 and connected to a KX-TA824 I found this
out. The TVS225 is operating in In band integration mode.
With the transfer setting to FXTD, the v
ONNECT the call
from its' management and the KSU will handle routing.
Michael Karaman
The Phone Network, Inc.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Deidre Volcker
Sent: Tuesday, March 28, 2006 5:25 AM
To: kxt@kxthelp.com
Subject: KX-T:
Just seeing if anyone has seen the behavior where the TVS-120 automated
attendant, while holding calls destined for busy extensions, fails to access
and play the Music on Hold for callers in between "Do you want to continue
holding" messages.
The TVS-120 Auto Attendant WILL play the hold music whe
please i have a kx-td1232 "dash 2" without dialing
tone. it goes on very well. when i connect a SLT and
try to make even an intercom call, i have a busy tone.
Help me to solve the problem please.
Hola, quisisera saber si puedo conectar una linea de slto analogica o
digital a una centralitz panasonic tx-td1232 que dispone de el modulo para
rdsi de 6 lines (290???) y como debo realizar la conexion.
HE visto que los grupos de linesa de salto se conectan con un solo par? es
necesario despue
asonic Phones & Voicemail
N.J. 973-627-7088
- Original Message -
From: "Finn Lassen" <[EMAIL PROTECTED]>
To: "John Challenor" <[EMAIL PROTECTED]>
Cc: "Panasonic Help"
Sent: Friday, December 16, 2005 9:40 AM
Subject: Re: KX-T: KX-TD1232 PRI C
ginal Message -
From: "Finn Lassen" <[EMAIL PROTECTED]>
To: "John Challenor" <[EMAIL PROTECTED]>
Cc: "Panasonic Help"
Sent: Friday, December 16, 2005 9:40 AM
Subject: Re: KX-T: KX-TD1232 PRI Conference Calls
> Well, apparently it's somewhat int
6, 2005 9:43 AM
> To: Randy Dell
> Cc: Panasonic Help
> Subject: Re: KX-T: KX-TD1232 PRI Conference Calls
>
> Thanks. I just checked areas 3 and 4 and all 24 bits are zero (0 db).
> It's really odd if there are not supposed to be problems when
> using the PRI.
>
>
TED]>
> Cc: "Panasonic Help"
> Sent: Thursday, December 15, 2005 10:30 PM
> Subject: KX-T: KX-TD1232 PRI Conference Calls
>
> > Skimming through messages I saw hope that there might be a way to
> > increase volume to third party and/or incoming call forward
t; > -Original Message-
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED] On Behalf Of Finn Lassen
> > Sent: Thursday, December 15, 2005 11:30 PM
> > Cc: Panasonic Help
> > Subject: KX-T: KX-TD1232 PRI Conference Calls
> >
> > Skimming through
1:30 PM
> Cc: Panasonic Help
> Subject: KX-T: KX-TD1232 PRI Conference Calls
>
> Skimming through messages I saw hope that there might be a
> way to increase volume to third party and/or incoming call
> forwarded to an outside line if you have a PRI.
>
> Can any
Skimming through messages I saw hope that there might be a way to
increase volume to third party and/or incoming call forwarded to an
outside line if you have a PRI.
Can anybody point me in the right direction?
Finn
--
Finn Lassen
Deputy CIO
Axiom
1805 Drew Street
Clearwater, Florida 33765
727-
You need to check the date on your computer, it "thinks" it's 2001
Does it make a difference? not really - except that I had to "hunt" for
the un-read messages
Don Ritchie Century Communications Euclid, Ohio
Support wrote:
>Is there any way to connect the Panasonic KX-TD1232 and Cisco 1760V?
Is there any way to connect the Panasonic KX-TD1232 and Cisco 1760V?
There's E&M Interface card (VIC-2E&M) available for Cisco router but will it be
able to connect to the KX-TD1232's E&M card?
Arnold.
_
KX-T Mailing list --- http://
PROTECTED] On Behalf Of
Support
Sent: Monday, October 10, 2005 9:37 PM
To: kxt@kxthelp.com
Subject: KX-T: KX-TD1232 extensions no loging working on 1xx
Importance: High
Hi,
My KX-TD 1232 PBX is malfunction since yesterday. The normal extensions like
101 tru 116 is no longer working and only the 201 tru
The KSU digital side is blown, there is no field fix for that,
Either send it for repair or try to get a replacement
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
Support
Sent: Tuesday, October 11, 2005 12:37 AM
To: kxt@kxthelp.com
Subject: KX-T: KX
Hi,
My KX-TD 1232 PBX is malfunction since yesterday. The normal extensions like
101 tru 116 is no longer working and only the 201 tru 216 is working. And in
order to call to operator, it cannot be able to go tru with 0 anymore. Would be
greatly appreciate for the help and the suggestions from
Hello Everyone!
I have a KX-TD1232 where I work and one of the extensions cannot make
outside calls. When I dial 0 it seems to get the outside line correctly, but
after 02 more digits it gives me a busy tone.
Does anyone know what programming code do I need to change and how to do
it?
Thanks a l
rent.
>
>-7 is not a firmware upgrade.
>
>Marc
>[EMAIL PROTECTED]
>
>- Original Message -
>From: "Finn Lassen" <[EMAIL PROTECTED]>
>To:
>Sent: Monday, March 14, 2005 5:49 PM
>Subject: KX-T: KX-TD1232-6 Call logging
>
>
>
>
<[EMAIL PROTECTED]>
To:
Sent: Monday, March 14, 2005 5:49 PM
Subject: KX-T: KX-TD1232-6 Call logging
> Looks like the maximum number of incoming Caller ID digits that the
> system will output is 11 digits.
> Examples:
> 12345678901 Jimmy Blow
> 12345678901
>
> This i
Looks like the maximum number of incoming Caller ID digits that the
system will output is 11 digits.
Examples:
12345678901 Jimmy Blow
12345678901
This is a problem when receiving overseas calls.
Does later firmware like KX-TD1232-7 handle this?
Finn
--
Finn Lassen
Deputy CIO
Axiom
1805 Drew St
Hey Guys:
Got a customer bringing me a TD1232 to test for operation. He bought the
thing at an auction and wants to to ship it to Russia.
1. Does this guy need a KX-TD1232E for Europe?
2. What are the differences in the telco in Russia vs. USA?
I'm gonna test the unit for the guy, but h
Hi list,
I have just setup an TD1232. I'm not an phone guru at all.
My boss did ask me to do something for him. I did read all the manuals, but
can not find the answer.
So the question is. He wants to forward one of the CO lines during the
night to his Cell Phone. Which mean to forward incoming c
I have 2 scenarios I need help with guys.
In one office i have 3 phantom extensions, the only problem is if someone is
on their phone, the phantom does not ring, this is important because that is
how all the calls are answered. Any way around this?
2nd Ques:
I have 8 SLT phones hooked up in a tel
Hi, I have a KX-TD1232 with P221A rom, I want to do an upgrade, but a need
first investigate more about my actual PBX could you tell me which version I
have?, about dash "X"
I thanks for you help.
--
Lorenzo Maldonado M. <[EMAIL PROTECTED]>
Ovoplus del Centro S.A. de C.V.
Marc:
First, when the list has refered to a stopped clock, and replacing the
oscillator, means that the KSU would power up, but would not operate. A "stopped
clock" means the timing function of the CPU could not operate, allowing the
CPU to run through it machine cycles, and read memory an
This issue has been hashed out in the past and the previous conclusion in
this group was that the problem was a bad oscillator, but now I think that
is unlikely. Nobody confirmed that replacing the oscillator fixed the
problem.
I've got two KX-TD1232 systems that were in a dual cabinet configurat
Gents,
Ok go figure after all those things I did, sure enough the solution from
randy worked!
Randy gave me this solution:
look in station programming (program 99, ) Look at initial display,
CID
or CO name.
Program 99 811 (Shows Caller ID) store, should show CID
Program 99
Oops, are your replacing the entire CPU board or just the chips.
If it's the board, the same one should upgrade *any* version of older CPU.
-Joe
On Fri, 26 Mar 2004 08:29:48 EST, you wrote:
>I am upgrading a -3 cabinet to a -6. I am getting nothing out of the
>cabinet. The instructions say (
On Fri, 26 Mar 2004 08:29:48 EST, you wrote:
>I am upgrading a -3 cabinet to a -6.
VND (authorized eprom ugrade vendor) should have informed you that -3 CPU's
cannot be upgraded to -6
-Joe
_
KX-T Mailing list --- http://kxthel
I am upgrading a -3 cabinet to a -6. I am getting nothing out of the
cabinet. The instructions say (V6 CPU upgrade Instructions for KX-TD1232,
KX-TD1232-1.) I wonder if there is a another board for a -3 cabinet or I've got a
defective CPU.
Thanks
Ken
___
--- Start of forwarded message ---
From: larry <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Subject: Fwd: Re: KX-T: KX-TD1232 extension ring problem
Date: 1/14/04 9:08:21 PM
all the panos i've seen have a 4 slot ring sequence, so if you want them all to ring
at the same time
I have a TD1232 with salesmen,er,salespeople, in a ring group and one sales person
complained theat the "other" salespeoples phone rings and then his rings..and believe
me, they junp on a ringing phone 'cause this is a Porsche dealer...
If there are 8 sales people, and I put them on the same
I noticed on one vendor's web site they talk about the 2nd and 3rd display
lines only being available after certain revisions of the KX-TA624 and
KX-TA1232. What about the KX-TD1232? Are the 2nd and 3rd display lines
available?
multipart/alternative
text/plain (text body -- kept)
text/html
Dear All,
I'm trying to connect our Digital Super Hybrid System KX-TD1232 to an NMS-based IVR
application for auto-attendant purpose. There
seems to be a problem in getting a dial tone from the PBX when it tries to transfer
the call from main line to extension. I had the
following questions and
-7 includes Caller ID hardware with the KSU. No programming updates or
changes from a -6.
Bill Rakowitz
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: Wednesday, August 06, 2003 4:46 PM
To: [EMAIL PROTECTED]
Subject: KX-T: KX
in other words go to radio shack and pick up null modem adapter
- Original Message -
From: "David G. Lawrence" <[EMAIL PROTECTED]>
To: "Dmitry Morozovsky" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, June 06, 2003 3:23 PM
Subject: Re
Hello,
I tried to connect my KX-TD1232 with KX-TD184 card to the Cisco 3810 via TIE (E&M)
interface. My "best" result - when I connect the line and immediately choose it - I
can make one call. Then is no proper disconnection and this line hangs. I tried 5th
type of connection as shown in the man
Hello
I'm yet to test a back up floppy I made of a TD1232-5 but i'd like to know just
how much does the Pana utility
back up, absolutely everything; station speed dial & caller ID logs, ARS tables,
flexible button assignments ect.
or what? :+)
Thanks!
_
Church
1095 East Reagan Parkway
Medina, OH 44256
330-723-0770
[EMAIL PROTECTED]
-Original Message-
From: chris Snyder [mailto:[EMAIL PROTECTED]]
Sent: Friday, December 06, 2002 7:35 AM
To: Brown, Mitchell (Medina, OH)
Cc: [EMAIL PROTECTED]
Subject: Re: KX-T: KX-TD1232 and ESI Voiceworks
elect-telecom.com
- Original Message -
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, December 06, 2002 8:38 AM
Subject: Fwd: KX-T: KX-TD1232 and ESI Voiceworks (first version)
> In a message dated 12/6/02 8:37:29 AM Eastern Standard Time, Tel4553703
> wri
Hello everybody,
We are planning to buy a new KX-1232-6. Currently, we are using a
KX-TD1232-2. I use programator to configure it.
My concern is if I will be able to use programator to configure the new
KX-TD1232-6. Does anyone is using programator with the new KX-TD1232-6? Any
problems? Comments?
disable DIL 1:N to the VM ports. That does not seem to do anything useful.
configure Ports 24 & 25 for voicemail.
configure DIL 1:1 to the extension group of voicemail (default x165)
suggest configure IRNA rings = 3 or 4 (default 12)
suggest configure IR B/NA -> x165 at each station
Paul Gusci
Hello,
Does anybody knows someone who is selling a used in good conditions)
Telephone System KX-TD1232 and a Voice Mail System KX-TVS200?
We are using one of those and we are planning to buy an extra one to keep it
as a back up.
If anyone has it, please let me know the price.
Thanks,
Luis
_
The main problem is that the switch keeps track of outside calls and treats them as
such when done as a straight flash-forward. That is, the ext will ring but not do the
auto-answer thing as with an intercom call.
We have a Melco RA-330 Remote Access unit installed here that almost does what yo
I have a client that has a KX-TD1232 in his home. He wants to be able to
call in and hit VM, then select an option to intercom any station(handsfree)
direct from CO. What is the most effective way of approaching this, and can
it be done behind a password? Thanks,
David Jeter
Total Home Entertainm
98 matches
Mail list logo
