http://icapax.net/httpnxwortz-2.php?reedonly=314
How is it going?
___
My heart fell down amongst my lungs and livers and things, and a hardpiece of
corn-crust started down my throat after it and got met on theroad with a cough,
and was shot across the table, and took one of thechildren in the
Where is it planned for this year?
Sent from my iPhone
On Jun 29, 2012, at 4:46 PM, "Larry&Sallie Flesner"
wrote:
> At 03:53 PM 6/29/2012, you wrote:
>>Just 90 Days till the greatest KR show on Earth. Will you be there?
>> http://krgathering.org/
>> Mark Jones
>
>
Randy,
I live about 45 min from you. I have a 2S that may never get done, the wife
is wanting to turn my hanger back into a garage. I have everything to finish
the plane..including a full panel and dual radios.
When I bought the project...I didnt have much money but had ample amounts of
Pete,
I would suggest mail order look for kite spars.. into the wind in
Boulder Colorado has fiberglass wound spars 1/4 in od for about 2-3 bucks.
I hope that helps.
-Jeff
Can someone please tell me what the status of the cowling mold is and what
I must do to borrow it for a short period of time or if its still open for
circulation?
Best Regards,
Jeff W.
> is
mounted on a spring, will move forward contacting the impeller > preventing it
from turning.> I hope this helps.> Cheers.> Pete.> > wilder_jeff Wilder wrote:>
> All,> > > > I have a Revmaster 2180 turbo which has not run in some time... I
am trying
All,
For those who are interested, I have 2 engines for the taking.
1 Subaru E81b
1 Corvair ( I cannot find the serial #'s )
I am North of Denver. If I cant find a good home for them, I am going to send
them off to the junkyard/dump
-Jeff
All,
I have a Revmaster 2180 turbo which has not run in some time... I am trying to
figure out should I keep it.. or just source an O200 for it.
My question is this, the turbo impellers currently do not rotate. I've spent
some time and disassembled the intake out and output housing to remove
well all, I think I have a winner! I've attempted to make a turtle deck,
this is now the 3 attempt.
I dont feel the need to go into detail as to why the first 2 failed, lets
just say that polyester resins melts monokote. Over a male mold... it looks
great, after the piece is pulled... Um... w
You may have a set of DD wing skins they are about 14 inches longer.
The spars do not extend to the wingtip, they stop about 14in before the end.
All the info can be found on Dans site
-Jeff Wilder
CISSP,CCE,C/EH
When I started at looking to build an aircraft I thought about building a
water bird... I came across the Osprey from www.ospreyaircraft.com . This
aircraft is basically an amphibious KR2. Its the same construction, a little
bigger engine though.
-Jeff Wilder
CISSP,CCE,C/EH
I just flew into MDW and back to DEN over the last two days. Although it was
on Frontier Airlines. :( still building
perhaps next year I can say I did it in N2HOTT or whatever end numbers I end
up with.
-Jeff Wilder
CISSP,CCE,C/EH
I would like to see a few pics, Bill have you actually started the build,
I'm sure many of the others, as well as I, would enjoy what you documented
so far.
-Jeff Wilder
CISSP,CCE,C/EH
All,
Once again I offer a newbe question, Please help.
So, I purchased an corviar engine from Oldbiker777, here off the list here,
and I am trying to validate that its a suitable engine for turning into a
KR2 power plant.
in examination of the engine... I see a block code of T0II2Z howe
1 yard = 91.5 CM
a yard stick is just that... its a measuring stick 3 feet long. The stick is
36 inches in length
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP+
I migrated form the US to Austrialia back in 85 ( although back in the
states now )... Ya... the first taste of veggiemite cured me for life...
extreamly salty and as thick as tar... about the color of it too...Not on
the taste of may Americans pallets.
Its something your not going to want
What about using a white foam cooler you can get from Walmart during any
summer. I think they cost about 3 bucks. Fill it with 3 gallons of water,
mark the line... empty water, place release agent ( plastic wrap ) inside
and fill with your plaster up to the given line. Be it would be alot
f
Can you use the 4th main bearing that the GP engine has on your block? or
would you have to machine the pulley end of the block to accept it?
Can you explane your redrive system a bit further?
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d
where did you find the Fir that meets AC quality?
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ DI++ D++
G e* h--- r- y+++*
--END
http://www.funlol.com/funpages/How-to-Total-a-Helicopter.html
I looked into the Mazda 13b with a PSRU... the end weight was about 350 lbs
or more.
Can the KR2 airframe handle that kind of weight hanging off the front?.. or
the pull of 200HP?
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ U
How do these numbers relate to the other corvair you are using? and is this
the same prop?
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ D
I would have to believe that someone on the list would be able to help me
with an issue with autocad.
I have a file that I am trying to print. An instrument pannel to be exact.
Anyway... when I try to print the file... it only prints an 8.5 x 11 full
sale subset of the whole pannel and no mor
All,
I spent alot of time trying to maximize my $ in building my KR. I've spent
alot of time also reasearching e-bay for products that I can use at a good
price.
I've just purchased a DG...:) pictures looked good.. however when I received
it.. there was a green tag on it saying its repaira
Not log ago, I saw a picture of a KR with winglets. I know nothing more then
that though. Does anyone know who owns it?
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y+
Can someone tell me what corvair engine block I should be looking for?
-Jeff
to:krnet-requ...@mylist.net?subject=subscribe>
>Errors-To: krnet-boun...@mylist.net
>Return-Path: krnet-boun...@mylist.net
>X-OriginalArrivalTime: 09 Jan 2007 01:18:24.0078 (UTC)
>FILETIME=[0ED756E0:01C7338C]
>
>wilder_jeff Wilder wrote:
>
> > Can someone tell me what c
Are you needing drawings ... or are you needing an actual mount?
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ DI++ D++
G e* h--- r
;<http://mylist.net/listinfo/krnet>,<mailto:krnet-requ...@mylist.net?subject=subscribe>
>Errors-To: krnet-boun...@mylist.net
>Return-Path: krnet-boun...@mylist.net
>X-OriginalArrivalTime: 10 Jan 2007 02:42:47.0869 (UTC)
>FILETIME=[038246D0:01C73461]
>
>Jeff,
>I just
what do you think it would cost to ship the turtle deck out to Colorado?
the forward deck, is that the canopy frame or the fuel tank that sits right
behind the firewall?
what is the pitch of your prop?
-Jeff
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
Lee... they make a wireless camera... a spy camera if you would... you can
even get a wireless camera from walmart for about 100 bucks. Small and
light.
Have it record to a laptop.
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++
Some time ago, a year or two, someone sent me a copy of autocad files of the
KR2SS is there any chance that individual could resend them, my CD that
I had them burned to is no longer readable.
Thank you in advance,
-Jeff
What are you wanting for it?
and what would you be wanting for the turtle deck and canopy frame?
-Jeff
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X--
there is as much room as you want to make :)... great thing about a KR...
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ DI++ D++
G
,<mailto:krnet-requ...@mylist.net?subject=subscribe>
>Errors-To: krnet-boun...@mylist.net
>Return-Path: krnet-boun...@mylist.net
>X-OriginalArrivalTime: 09 Dec 2006 20:41:48.0148 (UTC)
>FILETIME=[7280E340:01C71BD2]
>
> How to rebuild your VW. Otherwise known as the &q
I actually have one of the adjustable props on a revmaster... I am going to
just use it for static at the moment... Revmaster said that they redtagged
the props for tossing blades. I need to figure out how to get all the mess
off without making more of one.
Hey anyone have any really GOOD res
I bought a book from great planes about how to rebuld a VW engine
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ DI++ D++
G e* h--- r-
Can I get the air speed if its not spken for?
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ DI++ D++
G e* h--- r- y+++*
--END GEE
Nagy,
Where in Fl are you?
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ DI++ D++
G e* h--- r- y+++*
--END GEEK CODE BLOCK--
I think mark langford did
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ DI++ D++
G e* h--- r- y+++*
--END GEEK CODE BLOCK--
Guys,
try
http://www.strobe-direct.com/Catalog/Whelen/Strobe_Kits/Kits/Hide-A-Way_Strobes.htm#2
and
http://www.killacycle.com/Lights.htm
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
I have a small video of bill in a low level flyby at mount vernon last
year... must be doing every bit of 200mph just cranken!!!
if I can find the disk I have it stored on.. I'll send it out
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O
Cut a piece of panty hose,try to get the lighter colored ones, make a small
fame for it out of kydex or THIN ply... and streach it over the frame... and
attach with the adheasive of your choice.
Place over your screen... it stops the glare.
-Jeff
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEE
All,
I have been doing some deep thinking about the state of my bird. I purchased
it about 50% finished. DD wings... hydro breaks... the boat is on tri
gear... came with an E81 subaru w/ mount. ( in pieces).
The plane itself is a KR2... the building of it was started before the S was
around...
I am planning on driving out... I am in the denver area... maybe I can drive
down there and carpool out. Any takers?
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ P
I DROVE from Denver last year to the gathering ... I tried to be more of a
fly on the wall then anything else One thing I remember was that the
city of Mt. Vernon and the chamber of commerce really wanted to keep the
gathering there and wanted to help our cause.. perhaps we can ask and see
I have read much on the new airfoil from the posts... but I am still left
wondering
what are the net effects of the new airfoil over the raf48?
I have 2 sets of wings. DD and another standard set that I've picked up...
I am seriously thinking about selling them and building out the new ai
OUCH!
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ DI++ D++
G e* h--- r- y+++*
--END GEEK CODE BLOCK--
>From: "Pat
WOW mark... thats an awesome idea.>!!
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ DI++ D++
G e* h--- r- y+++*
--END GEEK CODE B
I had looked at the mazda 13B... while may be a great power plant... once
you have the PSRU and everything ready to go... My understanding is its
about 350 lbs... Massive power for the weight.. but the power is from RPM's.
There really are not that many planes flying on them either... I didnt
Congrats on the awesome plane Mark... ! some day soon I'll be there.
-Jeff
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ DI++ D++
G
I can understand being upset... but that was kinda harsh to send something
like that to the group!..
Ouch!
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5-
All... I need an opinion about filling some holes in the spars and
firewall..
The landing gear is a spring bar made out of about .75 Al. The spring bar
mounts to the spar using an "L" bracket made out of 3/4 AL. This L bracket
is mounted to the back of the spar with 6 .25 AN bolts.
I would l
With the engine purchase I jst made, I was given a set of wings for the KR..
they are the stock build.
When I bougth my plane I had a set of DD wings just about finished.
While I have a KR2, the plane is just too small to fit two adults as we all
know,,, I was planning on turning it into a rea
DD wings use the standard airfoil... but are an extra 24 inches or so longer
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ DI++ D++
All,
I picked up the used 2180turbo last night from Gillette Wy, about a 650 mile
round trip for me... and as it comes to find it, its the Revmaster 2180
engine, prop, coweling and all the goodies that came off of steve aldermans
plane a few years ago.
I know he is in the longmont/boulder col
The engine I purchased has a Maloof constant-speeed propeller... does anyone
know if they are still in business... and if so.. the contact for them. I
was unable to locate anything on Google for them.
Also, does anyone know the history of these propellers?
-Jeff
they broke cranks.
>Either way, they were bad news. Call Joe at Revmaster for the best
>information.
>
>Brian Kraut
>Engineering Alternatives, Inc.
>www.engalt.com
>
>-Original Message-
>From: krnet-bounces+brian.kraut=engalt@mylist.net
>[mailto:krnet-bounce
As I am told... the engine has 400 hours on it ... and was pulled off to be
replaced with an O200
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv
All,
I came upon a deal that I couldnt turn down.
I bought a Revmaster turbo 2180, 2 speed metal prop, cowling, motor mount,
oil cooler, basically the entire firewall forward package for a GREAT deal.
Is there anything that I should investigate as part of having a used
revmaster. I am told it
does anyone have a link to the BRS site?
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ DI++ D++
G e* h--- r- y+++*
--END GEEK COD
can yo please send it to me?
thank you!
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ DI++ D++
G e* h--- r- y+++*
--END GEEK CODE
Does anyone have an autocad or DFX file of the fuse for a KR2S or KR2SS?
I think I am going to give up on the KR2... and rebuld the fuse. I would
like to have a template printed off at a local print shop to work from.
Thank you,
-jeff
Mark,
I have a KR2 that was streched before the S was available... built to the
plans.. problem is.. is too wide for a single seater, and not wide enough
for a 2 seater... I was thinking aobut just starting the fuse over. and
using all the existing hardware
-Jeff Wilder
CISSP,CCE,C/EH
-
UHHGGG!!!
I bought an R.C. Allan Gyro off of ebay last week... I received the product,
it was as described.. but when I was bidding on it, I did not realize that
it was 115v AC 400mzh.
UHHGGG!!! once again.
Anyone know if I can convert this to 12v dc?
-jeff
list.net>
>List-Help: <mailto:krnet-requ...@mylist.net?subject=help>
>List-Subscribe:
><http://mylist.net/listinfo/krnet>,<mailto:krnet-requ...@mylist.net?subject=subscribe>
>Errors-To: krnet-boun...@mylist.net
>Return-Path: krnet-boun...@mylist.net
>X-Or
Greetings all,
I wanted to get a few ideas about the instruments outside of the basic VFR
that are required that I would need.
I currently have:
Narco 810 transcever
Narco MK12 Nav/Com w/ VOR indicator
compass
VSI
Altimeter
Airspeed
I have an attitude gyro ( although I cant use it arr)
I
I think all and all .. it isnt going to work for me.
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+ PE- Y++ PGP++ t+ 5- X-- R* tv b++ DI++ D++
G e* h--- r- y+++*
--
In all of the e-mails that have passed through, I have found most interst in
the rebuild and that of the new airfoils.
I purchased a hull and 80% finished DD wings. The fuse was on its gear had
a turtle deck and tail was basically finished. I didnt like the look of the
turtle deck, cut it off
Does anyone have the contact for a gentleman by the name of Dana that came
to the fly in. He and his family in Ky. I need to get in contact with him if
I can.
Thanks!
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-
Larry.
thank you for the shirts and hat... Can you tell me what I owe you for
everything.. and I will have a check in the mail.
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+
Can someone please help define for me the requirements for the strobe and
postion lights for night flight
so far this is what I know/understnad
red light on the left side
green light on the right side..
what I dont understand is hte placement of the strobes...
I know/think I need a light at t
Does anyone know about how much weight paint adds to the basic airframe?
I have come across a carbon/kevlar cloth that is already colored. My
thoughts where to use that to side my fuse with and just not paint it.
The cloth is 5.5 oz... I figure about 2 pounds of cloth and what ever resin
it woul
Great looking plane!.
I just wanted to say... sorry about the luck... this in the end could turn
out to be a good thing
2002 I went through the same thing was hired on another company after 5
months of looking
and was able to get pulled into the security industry.
I might suggest you look
I would say that June would be nice. I have a kid that I would have loved
to brought, but was unable to pull her out of school
-Jeff Wilder
CISSP,CCE,C/EH
-BEGIN GEEK CODE BLOCK-
Version: 3.1
GIT/CM/CS/O d- s:+ a C+++ UH++ P L++ E- w-- N+++ o-- K- w O- M--
V-- PS+
Mark,
I believe I have a set of matco ( I think ) breaks...if you send me the part
number from AS&S... I'll have a look and see. if they are.. I can next day
them to you.
970 405 7478 is my cell...
970 785 2157 is my home..
or drop me an e-mail I check it all day long. I hope I can help ya ou
Is the airplane airworthy? any radios or other insturments?and where is
it located?
-jeff
>From: sixfeetsm...@alaweb.com
>Reply-To: sixfeetsm...@alaweb.com, KRnet
>To: kr...@mylist.net
>Subject: KR> KR-1 Fuselage and Remaster Eng for Sale
>Date: Mon, 5 Sep 2005 10:02:49 -600
>MIME-Version:
Geesh guys, I dont know if I am going to be able to make it up with the
price of fuel here in my home town almost 3.00 a gallon.
-Jeff
It looks really good. Does anyone know how much he is planning on selling
the cowling for?
-Jeff
>From: glenda mcelwee
>Reply-To: KRnet
>To: KRnet
>Subject: Re: KR> WW cowling
>Date: Thu, 1 Sep 2005 02:29:01 -0700 (PDT)
>MIME-Version: 1.0
>Received: from lizard.esosoft.net ([38.118.200.18])
>Daniel R. Heath - Columbia, SC
>---Original Message---
>
>From: Mark Jones
>Date: 08/27/05 15:29:37
>To: KRnet
>Subject: Re: KR> KR fly in
>
>You need to be 100% committed.
>
>Mark Jones (N886MJ)
>Wales, WI USA
>E-mail me at flyk...@wi.rr.com
>
Better then a woman?... MAN I NEED TO GET MY PLANE DONE
>From: "Mark Jones"
>Reply-To: KRnet
>To: "KR Net"
>Subject: KR> GATHERING
>Date: Sun, 28 Aug 2005 18:05:05 -0500
>MIME-Version: 1.0
>Received: from lizard.esosoft.net ([38.118.200.18]) by mc11-f16.hotmail.com
>with Microsoft SMTPSVC
I have a mini wagon... if I have room after the camping goods... I have some
wood I can bring...
-Jeff
>From: "Bob Glidden"
>Reply-To: KRnet
>To: "KRnet"
>Subject: KR> Gathering wood
>Date: Sun, 28 Aug 2005 20:42:30 -0500
>MIME-Version: 1.0
>Received: from lizard.esosoft.net ([38.118.200.18]
Does the peel ply actualy soak up the resin or does the resin work through
the cloth to sit ontop of the peel ply. Can you use the cloth more then
once?
The problem I have had is that after I work the resin into the cloth and
squeege of the extra resin, the, I get a few voids on the cloth... I
I know this has been talked about many times but can you tell me ...
when its going on.. and what city and state?
I might like to come if I can get away.
-Jeff
>From: "Orma"
>Reply-To: KRnet
>To: "KRnet"
>Subject: KR> Mt Vernon Holiday Inn
>Date: Wed, 24 Aug 2005 21:17:21 -0400
>MIME-Ve
Is there a count for the amount of people that are going to camp out
there?.. I thought that I read that camping out was an accetable activity
I have about 900 miles to drive to get there.. and thought it to be fun if I
go, I can camp somewhere rather then the hotel.
-Jeff
27;t wait. ONLY TWO WEEKS FROM TODAY
>
>Mark Jones (N886MJ)
>Wales, WI USA
>E-mail me at flyk...@wi.rr.com
>Visit my KR-2S CorvAIRCRAFT web site at
>http://mywebpage.netscape.com/n886mj
>
>
>- Original Message -
>From: "wilder_jeff Wilder"
>To:
>
.@mylist.net
>Return-Path: krnet-boun...@mylist.net
>X-OriginalArrivalTime: 27 Aug 2005 01:44:51.0880 (UTC)
>FILETIME=[EAB3B280:01C5AAA8]
>
>Not only acceptable, but a whole lot of fun!
>
>Brian Kraut
>Engineering Alternatives, Inc.
>www.engalt.com
>
>-Original M
Does anyone know what the Diehl main gear setup weighs?
I currently have a trike. The main gear is about 3/4 in Al. and am looking
to save as much weight as I can. The nose gear is from a BD4, kinda a nice
set up..has about 4 inches of travel as a shock.
My thought is that if I got rid of the
Great story Mark...:)
I make the same noises everytime I am out sanding off the next layer of
micro from my turtledeck, eyes closed, and smiles ear to ear. I find it
amusing how I have the whole craft planned out... down to the stiching of
the leather cockpit, full glass panels, and jet turbin
www.barnstormers.com has 2-3 of them a the moment.
>From: "Brian Kraut"
>Reply-To: KRnet
>To: "KRnet"
>Subject: RE: KR> KR2 for SALE
>Date: Wed, 3 Aug 2005 00:13:06 -0400
>MIME-Version: 1.0
>Received: from lizard.esosoft.net ([38.118.200.18]) by mc9-f15.hotmail.com
>with Microsoft SMTPSVC(6.0.
about 12 MPH.
>
>Brian Kraut
>Engineering Alternatives, Inc.
>www.engalt.com
>
>-Original Message-
>From: krnet-bounces+brian.kraut=engalt....@mylist.net
>[mailto:krnet-bounces+brian.kraut=engalt@mylist.net]On Behalf Of
>wilder_jeff Wilder
>Sent: Monday, July 18, 2005
As I would as well.
>From: ken j grevemberg
>Reply-To: KRnet
>To: kr...@mylist.net
>CC: kr...@mylist.net
>Subject: Re: KR> dual controls
>Date: Wed, 27 Jul 2005 12:26:28 -0400
>MIME-Version: 1.0
>Received: from lizard.esosoft.net ([38.118.200.18]) by mc1-f15.hotmail.com
>with Microsoft SMTPSVC(
I want to thank everyone for their kind words and advice. To update where I
am at... and lessons learned...
I pulled the piece off tonight...
1.The areas of the mold, that I used duct tape on, the piece still came
off... but for whatever reason, the resin melted the tape and caused the
resin n
Dan,
I dont know if this is what you are looking for... but go to the hardware
store.. where they sell hoods for stoves. They have a metal mesh filter that
is used on the hoods over the stove. You may have to cut it to the shape you
want .. but the one I bougth was about 10x12.. I think I paid
Can someone tell me about how far from the top of the firewall can I find
the center of the thrust line.
Can someone explain to me why it is that there is such a gap in the top end
speed of KR's... ( HP aside )
There is a guy here in Longmont Co that has a KR... says he can do over 200
in it... ( not for me ).. but he can, running an O200. He says his plane is
about 500lbs
built to the plans wit
All,
tonight I've built my mold for the turtle deck.. hopefully tomorrow I can
get a good piece off of it. I should be finished with it this next week.
I created formers.. run 1x2 stringers down the spine and the bottom ( total
of 3 ). I then wet and wrapped ply around the formers... nailed and
All,
I've finished making the form for the turtle deck.. covered it in mylar and
duct tape.. I'm ready to mix the resin and start the processes of laying up.
I have a single layer of 6oz cloth... a layer of 6in 6oz tape down the spine
and 4 6oz 6in tape layed across the spine as ribs. On top of
ld well save your life by acting as a rollover structure.
>
>Joachim Saupe wrote: Jeff,
>I think you are in OVERKILL mode. The turtledeck is NOT structural!!
>Joachim
>
>
> > [Original Message]
> > From: wilder_jeff Wilder
> > To:
> > Date: 7/12/2005 12:
The mold that I built was made out of ply bent around formers.. so I will
not have glass that up, its been covered in mylar and duct tapeSo I
really not able to create a "hat" I may be able to create some type of hat
out of foam and glass it after I pull the piece off.
I realize that I am
1 - 100 of 120 matches
Mail list logo
