Re: Stus-List Battery options

Edd, When Perceptions batteries died we picked up 2 group 31's at Costco (can't remember who makes them - but when I looked at the options they were the best rated especially when price is considered .. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Edd Schillay via CnC

Re: Stus-List Mixed batteries

Use an echo charger to charge the starting battery, and the Xantrex for the house bank. http://www.xantrex.com/power-products/power-accessories/auxiliary-battery-charger.aspx From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of via CnC-List Sent: May 5, 2014 9:48 AM To: cnc-list@c

Re: Stus-List Replacing the toilet and holding tank in a 1980 C&C 30 Mk 1

Peter, My sister got a diagram of the process from Rob at South Shore many years ago when she replaced the tank ... http://southshoreyachts.com Paul. :) > On May 12, 2014, at 1:10 PM, "Peter Delean via CnC-List" > wrote: > > Before I break a sweat, thought I should check in with the group.

Re: Stus-List java updates

Geez Missed the 088 card sorter . I may still have a programming manual for the 1130 and 1800 .. Paul Fountain Managing Director SeaSource Inc. Bookkeeping & IT Services. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Nylander via CnC-List Sent: May 16, 201

Re: Stus-List CB Question

We keep Perceptions down most of the time - unless in thin water or light winds . In the slip its left down usually - Paul Fountain C&C 33-II - Perception II -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Don Newman via CnC-List Sent: May 2

Re: Stus-List Centerboard cable length for a C&C 37+

When Rob from South Shore did mine last year he arrived with an eye roll pressed on the cable for the board end, lead the cable thru, and used a large hand sewage tool to put 2 sewage ferrules on deck Hard parts were removing the old pin at the keel, and fishing the cable as the old one h

Re: Stus-List Sealed-Up Centerboard and PHRF Credit

Edd, I can smile and relate to your cb challenges... 2 years ago when we moved Perception to the yard for winter storage I had 2 friends help.. 1 a power boater the other a sailor, asked the sailor to release the starboard jib halyard - clearly marked And guess which stopper he pulled ..

Re: Stus-List Sealed-Up Centerboard and PHRF Credit

Replacement sounds just like mine ... Same challenges. Pin was a bear to remove no room to work, and cotter pin was fully bent back on both legs, only room for 1 hand. To fish the new one in they removed the shiv in the on deck turning block, dropped a weighted line down, attached the new cable

Re: Stus-List Stanchion bases

Yes they do Call Rob http://southshoreyachts.com/contact/ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Nylander via CnC-List Sent: June 12, 2014 11:28 AM To: CandC List Subject: Stus-List Stanchion bases I am looking for a couple stanchion bases. They are t

Re: Stus-List 1985 C&C-33-2 Front Plastic Mast Insert

Raymond, We also have a 1985 C&C 33-II. The plastic insert covers the spinnaker pole track that is part of the mast extrusion. My understanding is C&C made the spars, for parts try South Shore Yachts http://southshoreyachts.com/ talk to Rob Maclachlan, he used to work for C&C. From: CnC-Lis

Re: Stus-List 1985 C&C-33-2 Front Plastic Mast Insert

ront Plastic Mast Insert I recently purchased from SouthShore (last year) the pole car that fits that internal track. You should find stopper screws at the top and bottom that stop the car. J.R. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul Fountain via CnC-List

Re: Stus-List Atkins Hoyle hatch

Joel, Is it an atkins & hoyle or Bomar? My 1985 C&C 33-ll had Bomar, if so I have one …. Paul Fountain From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: June 30, 2014 12:12 PM To: cnc-list@cnc-list.com Subject: Stus-List Atkins Hoyle hatch Doe

Re: Stus-List AH 4000 Questions

Joe, Must be the auto obsolescence feature ... Paul Fountain Managing Director SeaSource Inc. Bookkeeping & IT Services. -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: July 1, 2014 12:20 PM To: cnc-list@cnc-

Re: Stus-List 74 35 MkII Holding tank

Gary, Check with Rob at South Shore, when my sister replaced her mid 70’s C&C 30’s holding tank he had the exploded diagram on how it came apart … http://southshoreyachts.com/about_southshoreyacht/ From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Garry Cross via CnC-List Sen

Re: Stus-List Stainless Grab Rails & New Stanchion

Steve, Check with South Shore http://southshoreyachts.com , Rob has most parts ... Sent from my iPad > On Jul 30, 2014, at 3:01 PM, "Stephen Thorne via CnC-List" > wrote: > > > > > Guys, > > I need to replace on of my stanchions which got bent in a not so sexy > departure from a dock rec

cnc-list@cnc-list.com

Dave, Care to share ? :) Paul. :) On Aug 6, 2014, at 7:35 PM, "Dave Godwin via CnC-List" mailto:cnc-list@cnc-list.com>> wrote: Ha! I do keep that kind of accounting on all the money that I have and will be spending on our boat over the years. I can afford a new(er) boat. I'm just wonderi

Re: Stus-List Ok more atomic 4 issues...dammit!

Check your fuel lines ... The inner part may be collapsing ... Had this on a friends boat. Would run for a while, shut down .. After a while run again ... Tough to diagnose ... New lines fixed it Paul. :) On Aug 10, 2014, at 9:48 AM, "Burt Stratton via CnC-List" mailto:cnc-list@cnc-list.com>>

Re: Stus-List Winterizing -- Raw Water Intake

I have done this a couple of ways – with a 3 way valve, and with a tee where I shut the thru hull and open a valve on a piece of hose into the antifreeze ….. both work well. I also have an extra piece of hose I can put over the side if the thru hull plugs while I clear it …. Paul Fountain Manag

Re: Stus-List rebedding hatch

I did ours, and butyl tape worked great. Had to over drill and fill the old holes yes, also found cracks where the liner and deck met, which were a source of leaks, so fixed them with G2 Flex (if I remember correctly) which has a bit of give in it. The new Lewmar’s actually matched the openings

Re: Stus-List Sale Tools

Steve, Check out their address: Jl. Asia No.35 North Sumatera Medan 20111 And google them – lots of reports of scams & fraud ……. Paul Fountain From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stevan Plavsa via CnC-List Sent: Monday, October 19, 2015 9:19 AM To: cnc-list@cnc-l

Re: Stus-List Replacing Windows

We have done the windows twice – first time the contractor used ¼” – lots of issues, then had South Shore make a new set from the original templates, and they are 3/8” and have done much better – had a lot of repair work around the windows as a result of the first contractor, so could not make o

Re: Stus-List Pump-out fitting

Brad, We ended up replacing the all the deck fittings on Perception our 33-II with stainless. If I recall the original were from New Zealand, and we could not find a waste fitting to fit. This was done as part of replacing the hoses too. Paul Fountain Perception-II 1985 C&C 33-II -Origin

Re: Stus-List Replacing Windows

lations that Rob Ball did, we may never know. Just idle curiosity. Dennis C. Touche' 35-1 #83 Mandeville, LA On Wed, Oct 21, 2015 at 6:52 AM, Paul Fountain via CnC-List mailto:cnc-list@cnc-list.com>> wrote: We have done the windows twice - first time the contractor used ¼" - lots of

Re: Stus-List Vacation II St Martin

Still there and at least 2 more 12 meters ….. http://www.12metre.com/ Paul Fountain Managing Director SeaSource Inc. Bookkeeping & IT Services. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of William Walker via CnC-List Sent: Wednesday, November 25, 2015 8:57 AM To: cnc-list@c

Re: Stus-List C&C 33 mark 2 (1985)

Don't let the engine size deter you- our 33-ll k/CB had the 2gm when we bought her. Always got us where we were going. I did upsize when I repowered to a Beta 25. Which just fit in the space. Sent from Outlook Mobile On Sun, Dec 13, 2015 at 10:10 AM -0800, "Bob Hickson

Re: Stus-List Refrigeration on C&C 35 mk III

Sam, We put the Coolmatic unit in Perception our 33-II when we added refrigeration. Works great, we added the 120v power supply that uses 120 when available, and 12V when not. Never hear it ... I Have to look and see the fan turning to know it's on! Installation was straight forward, albeit un

Re: Stus-List Cost to recover cushions - ouch

We had our done by the same company that did our couch and chairs. Even let us provide the fabric, which we found at a discount fabric store …. Paul Fountain Managing Director SeaSource Inc. Bookkeeping & IT Services. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronso

Re: Stus-List Lexan hatchcovers in GTA

I had new hatch board and sliding hatch cover made for Perception last summer, used a company near Beamsville who could supply cast acrylic that matched the side windows we had installed , and cut/finish to size: Plastruct Canada 1 800 642 7797 905 563 4000 www.polyzone.com Paul Fountain Perce

Re: Stus-List Toronto Boat Show

We'll be manning a booth Saturday and will look around after our shift - found good deals on Foul weather gear last year. Looking at the SH 2200 this year, but with the Cdn peso it may wait! Paul Fountain Perception II 1985 C&C 33-II K/CB Port Credit Yacht Club From: CnC-List [mailto:cnc-lis

Re: Stus-List 1976 30mki - Tightening the tiller

On our C&C 27 I ended up with a large fender washer between the tiller and the rudder post it was a tight fit, but eliminated a very annoying slop due to a very tiny gap that tightening the bolt could not remove …. Paul Fountain Perception II 1985 C&C 33-II k/cb Port Credit Yacht Club From: CnC

Re: Stus-List Looking for recommendation on 33 mkii Genoa size

Doug, Where on Lake Ontario are you? We have a 33-II centreboard at PCYC. I'll be looking at a 135-142 when we replace our head sail. I have a 95 that has been up once in 15 years and that was when we still raced. Sent from Outlook Mobile _ Fr

Re: Stus-List Cutlass bearing size issue

Brian, try sanding the ends of the bearing/strut so you can see the brass bearing sleeve and bronze strut, may help you get an accurate size. Paul Fountain Perception II 1985 C&C 33-II k/cb Port Credit Yacht Club From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Brian Fry via C

Re: Stus-List CnC-List Digest, Vol 121, Issue 69

Where are you located Brian? I have a StrutPro tool …. Paul Fountain Perception II 1985 C&C 33-II k/cb Port Credit Yacht Club From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Brian Fry via CnC-List Sent: Monday, February 22, 2016 2:43 PM To: cnc-list@cnc-list.com Cc: Brian Fry

Re: Stus-List Macgyver2

The list of available sizes is on this site: http://www.morserubber.com/ Sent from Outlook Mobile On Sat, Feb 27, 2016 at 6:07 PM -0800, "Brian Fry via CnC-List" mailto:cnc-list@cnc-list.com>> wrote: If you have a link it would be greatly appreciated, for I cannot find

Re: Stus-List best folding prop for 30 MK1 w/ A4

I'll second the Flex-o-fold - have one on Perception, works well in forward and reverse. Much better than the Campbell Sailor it replaced. Paul Fountain Perception II 1985 C&C 33-II k/cb Port Credit Yacht Club -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Beh

Re: Stus-List best folding prop for 30 MK1 w/ A4

se? Does the boat stop quickly and start moving astern or si it like the martec where it keeps going forward for a long time? -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul Fountain via CnC-List Sent: Monday, March 07, 2016 2:05 PM To: cnc

Re: Stus-List Stainless grab rails

Try Klacko in St Catherines or Stainless Outfitters in Barrie …… Paul Fountain Perception II 1985 C&C 33-II k/cb Port Credit Yacht Club From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bob Hickson via CnC-List Sent: Tuesday, March 15, 2016 12:28 PM To: cnc-list@cnc-list.com Cc:

Re: Stus-List Email List or Forum

I'm with Dennis ... Old and like email ! Paul. :) On Mar 13, 2015, at 6:16 PM, Dennis C. via CnC-List mailto:cnc-list@cnc-list.com>> wrote: 1) I can set my email to "thread" view. No advantage for me to go to forum. 2) How mobile friendly would forum be? I read a lot of the list mails on my

Re: Stus-List transmission Shifter

Disconnect the cable from the shift arm on the transmission and see if the arm moves freely. Also then see if the shifter at the wheel moves freely. One won't! If it's at the wheel inspect the cable for kinks, if none is suspect rust on the cable ... Time to replace. If the transmission lever is

Re: Stus-List halyard stoppers

Brad, Perception had Schaffer stoppers on her when we got her (85 C&C 33-II K/CB). They were chewing the new running rigging very quickly - at the recommendation of our sailmaker we replaced them with lewmars. The lewmars need to be sized right for your lines, they have smaller ranges than mos

Re: Stus-List New foredeck hatch

Tom, when I did Perceptions (85 33-II) hatches I used Lewmar Ocean series that deck mounted. The corners fitted the ones on the openings better than the Bomars I removed. Paul Fountain Managing Director SeaSource Inc. Bookkeeping & IT Services. From: CnC-List [mailto:cnc-list-boun...@cnc-list.c

Re: Stus-List Recommend Rigger in Toronto

Steve, Surprised to hear about Rob, he has always done well for us. Here is another rigger – is an expert in Nonsuch, but does others as well : Mike Quill in St Catherine’s. http://www.mqyr.com/ Paul Fountain Managing Director SeaSource Inc. Bookkeeping & IT Services. From: CnC-List [mailto:cn

Re: Stus-List PSS shaft seal 33 mkII

Bruno, We did this on Perception 12 years ago, tight but had room. Since empowering, and now just enough room! Paul. :) On Apr 13, 2015, at 12:36 PM, Bruno Lachance via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Hi all, I'm about o buy a PSS shaft seal for my 33 mkII and i'm having a sl

Re: Stus-List Replacement Sheaves

Try garhauer.. Made ours Paul. :) On Apr 19, 2015, at 9:22 AM, Jake Brodersen via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Guys, As part of my spring maintenance, I've been going over the mast. Yesterday, I was going to lubricate the masthead sheaves and found that one of them was bad

Re: Stus-List Replacement Sheaves

Jake, We had garhauer make them for Perception(33-2), 2 aft, their standard fit fine, the 3 forward had to have non standard made ... Love the ball bearings! The Catalina's in your picture are Garhauer's, they do most of the hardware for Catalina. Sent from my iPad On Apr 19, 2015, at 5:34 PM

Re: Stus-List Mast on c&c 33 MKII

Brad, ours was made by C&C. Contact Rob MacLachlan at South Shore Yachts for parts. His email: sa...@southshoreyachts.com Website: http://southshoreyachts.com/ Paul Fountain Managing Director SeaSource Inc. Bookkeeping & IT Services. -Original Message- From: CnC-List [mailto:cnc-list

Re: Stus-List New Engine

Tim, I went the Beta route on Perception – replaced a 2GM that was going to cost 2/3 of a new Beta to rebuild – without touching alternator, tranny, or starter – Put in the 25 HP Beta, a tight squeeze, but fit. Had spacers made to fit the motor mounts, went with the shallow sump, and upgraded

Re: Stus-List Atkins Hoyle hatch replacement

On Perception, a 33-II with an angled front hatch almost to the deck at the front I used the Ocean series, no flange (if you mean the vertical piece that lines the opening). I leave the hatch slightly open so wanted the extra height in heavy rains when away from the boat. Fit the opening better

Re: Stus-List 12 volt cordless drill

I’ll second Dennis’ recommendation! Have the Makita 18v, and it is a work horse, both at home and on the boat. Paul Fountain From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Tuesday, June 16, 2015 11:49 AM To: CnClist Cc: Dennis C. Subject: Re: Stu

Re: Stus-List Engine Troubles

Give beta engines in North Carolina a call... When we did Perceptions they were less than a Yanmar, fit the same bed width ... New holes, same shaft length, but gave us new alternator and starter that the rebuild would not have. http://www.betamarinenc.com Sent from my iPad On Jun 21, 2015, a

Re: Stus-List C&C 37+ Repower -- Ugh

Edd, Have a Beta 25 in our 33-ll, replaced a yanmar 2GM20, hardest part was removing the old engine. We went with a bigger engine that just fit the space, but the rails fit perfectly we had to add spacers under the mounts.. Local machine shop did them in an hour or so. Love the new engine, did

Re: Stus-List Holding Tank for C&C 37 Plus

Try Kracor, they made a lot of the original poly tanks in C&C’s http://www.kracor.com/. Or Moeller Marine http://www.moellermarine.com/ Paul Fountain Managing Director SeaSource Inc. Bookkeeping & IT Services. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Russell v

Re: Stus-List C&C 33 winches on cabin top

Brad If I remember you are in Canada I may have a ST 19 that I took off our 33-II (it was for the centre board.) Paul Fountain Managing Director SeaSource Inc. -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bradley Lumgair via CnC-List Sent:

Re: Stus-List C&C 33 winches on cabin top

I have an 18 and a 19 that I took off our 33-ll when we did a winch upgrade ... Sent from my iPad > On Jun 28, 2015, at 8:28 AM, Bradley Lumgair via CnC-List > wrote: > > C&C 33 MkII I have 2 winches on either side of the companionway, 3 barient > #10 and 1 #18. The jib halyard leads to the

Re: Stus-List westerbeake sucking in air on a half tank

Or the pickup becomes blocked, and air gets sucked in elsewhere in the fuel system. Paul Fountain From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G Street via CnC-List Sent: Monday, July 6, 2015 9:12 AM To: cnc-list@cnc-list.com Cc: Frederick G Street Subject: Re: S

Re: Stus-List Pedestal overhaul

I have an access port under the helm seat to give access to ours. Paul. :) > On Jul 12, 2015, at 3:39 PM, Michael Crombie via CnC-List > wrote: > > > Not much wind here in Toronto today so thought it would be a good day to > overhaul the pedestal on my 33' mkii. First step of course is to

Re: Stus-List Pedestal overhaul

derneath the > quadrant so I can't even see the adjusting nuts from the port. > > > > Sent wirelessly from my BlackBerry device on the Bell network. > Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell. > > -Original Message- > From

Re: Stus-List Diesel issues

One other I have experienced is the fuel line inner liner collapsing and starving the engine . Sent from my iPad On Jul 19, 2015, at 8:12 PM, Frederick G Street via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Charlie - also check the fuel vent just under the toerail for insect/spider nests

Re: Stus-List Wire Gauge question

The Blue Seas calculator says for the voltage drop you need 10 gauge, which has an amp capacity of 40! For the amperage you need ABYC says 18 gauge, so somewhere in between is where I'd be. Paul Fountain Managing Director SeaSource Inc. Bookkeeping & IT Services. From: CnC-List [mailto:cnc-li

Re: Stus-List centreboard channel woes C&C 35-3

Phil, Contact Rob MacLachlan at South Shore Yachts he fixed ours when the pendant broke. sa...@southshoreyachts.com, or try calling (works better) tel:905-468-4340 Sent from my iPad On Jul 26, 2015, at 1:58 PM, Phil via CnC-List mailto:cnc-list@cnc-list.com>

Re: Stus-List C & C 35 Mk III CB Keel Bolts

Have 33-2 with k/cb - no issue with the bolts, but the washers do need to be replaced with stainless ... Paul. :) On Jul 30, 2015, at 5:01 PM, Judith Sherman via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Has anyone with a C&C 35 MkIII CB ever had a problem with rusting keel bolts? Judy

Re: Stus-List Regulator for force10 grill

Try Kuuma, they bought Force 10. Have a facility in Greensboro NC. Paul Fountain Managing Director SeaSource Inc. Bookkeeping & IT Services. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Pete Shelquist via CnC-List Sent: Thursday, August 6, 2015 8:28 AM To: cnc-list@cnc-list

Re: Stus-List Stanchion support problem

South Shore Yachts in Virgil Ontario has both pieces http://southshoreyachts.com/shop/ Paul Fountain Managing Director SeaSource Inc. Bookkeeping & IT Services. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of TOM VINCENT via CnC-List Sent: Thursday, August 13, 2015 4:01

Re: Stus-List Shore Power Question

When the boat is in the water, shore power is on when we are at the dock Mostly for refrigeration as we do leave 'stuff' on board that needs it. Paul. :) On Sep 2, 2015, at 4:03 PM, Dennis C. via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I have left mine on 24/7 for years without inc

Re: Stus-List 33MKii main breaker rating?

Our 33-ll has a 100 amp breaker. Paul. :) > On Sep 7, 2015, at 7:46 AM, Dave via CnC-List wrote: > > Hello, I am upgrading the house battery arrangement in my 33ii and will > replace the selector switch and breaker with a blue sea panel, which includes > a 100A main, among other things. > Do

Re: Stus-List 33MKii main breaker rating?

Handle broke on ours ... No need for a guard now! Have been able to use a screw driver to push when needed, passed a recent survey .. Picky surveyor too. Sent from my iPad On Sep 8, 2015, at 8:29 PM, Jake Brodersen via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I've kicked that breaker cou

Re: Stus-List Spinnaker Turtle bags

Have one of these on Perception: http://www.blueperformance.com/pages/product_details.html?../images/products/spinnaker-bags.jpg The medium I think. Paul Fountain From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Wednesday, September 9, 2015 1:4

Re: Stus-List Interior Cushions

We had Perception's cushions done a few years ago - had the people who have done some home furniture recovering do the labour for us, bought the fabric ( a nautical print microfiber) at a local fabric discount store for them. Old Timers has removed the cost, but it was significantly less than a

Re: Stus-List Recovering MOB

You would need a sling or bridle. Paul. :) > On Sep 18, 2015, at 3:15 PM, Dennis C. via CnC-List > wrote: > > The Admiral and I have mastered the art of hoisting the inflatable 9+ foot > dinghy and putting it on the foredeck for transits. We use a halyard and a > cabin top winch. It's fai

Re: Stus-List Looking at a C&C 33-2.... known issues?

We have had Perception since 2000, and replaced just about everything in the 15 years – Love the boat. We looked at upsizing, but realized that not many boats sailed as well and were as easy to handle with just 2 of us (well 1 sailing 1 reading). Perception spent 20 years in salt/brackish water

Re: Stus-List top rudder post washer

Done this Will do a post with how when we are Back home enjoying a sail for a change Paul. :) > On Aug 17, 2014, at 12:24 PM, "Charlie Normand via CnC-List" > wrote: > > After a beautiful sail yesterday in Narragansett Bay by Fort Adams (site of > this year's NE Rendezvous - still room to

Re: Stus-List top rudder post washer

Charlie, Had to do this on Perception II our C&C 33-II. I sourced the Teflon ring and pin thru South Shore Yachts (http://southshoreyachts.com/) The top of the rudder post has a threaded hole in it, I purchased an eye bolt that fitted the threads (3/8” I think but would need to check) used the

Re: Stus-List Pedestal

Mike, I had Perceptions (1985 C&C 33-II) apart (again) last weekend to fish a new GPS antenna. Mine has the compass, which removes with bolts 2 visible, 2 hidden under caps. Once the compass is off there are 4 bolts that hold the compass base to the pedestal - they pass thru the cylinde

Re: Stus-List Yanmar 4JH-TE Repower on C&C 44

Jonathan, When we replaced Perceptions Engine, we bought a Beta engine – imported it from England – saved over the Yanmar, and can now use Kubota parts! It was Yanmars Canadian pricing that caused us to look at other options – the parts to rebuild were 2/3rds of the price of the beta – without

Re: Stus-List Forum on C and C photoalbum site

Working for me - Windows 8.1 with IE 11 Paul Fountain From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jack Shincke via CnC-List Sent: Monday, September 8, 2014 11:00 AM To: cnc-list@cnc-list.com Subject: Stus-List Forum on C and C photoalbum site Is the forum on the C and C

Re: Stus-List Companionway hood

Don, James at Dockside Marine in Bronte carries butyl Sent from my iPad > On Sep 8, 2014, at 10:49 PM, "D Harben via CnC-List" > wrote: > > Hi > I am interested in at least one roll, perhaps 3, if long term storage is not > a problem. > > Don > Oakville > >> On Sep 8, 2014, at 10:47

Re: Stus-List Traveler components

Have a garhauer traveller ... Works great! Paul. :) On Sep 15, 2014, at 8:18 AM, "Marek Dziedzic via CnC-List" mailto:cnc-list@cnc-list.com>> wrote: I would second the idea of talking to Guido about the repairs. Or better yet, talking to him about replacing the traveller. Their new cars are

Re: Stus-List Farley Mowat and thanks

Sadly Farley Mowat recently passed away. Sent from my iPad On Oct 17, 2014, at 9:32 AM, Richard N. Bush via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Sometime last spring, someone on the list mentioned that he was reading the Farley Mowat book; "The Boat Who Wouldn't Float"; I had never h

Re: Stus-List West Marine leaves Canada

Steve The Dock Shoppe has reopened where Genco was On Queens Quay ….. there is also the Chandlery in Bronte (until he has to move) Paul Fountain Perception II 1985 C&C 33-II Newport Yacht Club – Stoney Creek, Ontario From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Marek D

Re: Stus-List Source for Hardware to Close Panels

PYI have a floor anchor system that may be what you are looking for Www.Pyiinc.com Paul. :) On Dec 3, 2014, at 9:53 AM, Edd Schillay via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Listers, Anyone know of a good source for hardware to close panels? I'm adding some n

Re: Stus-List blooper explained

One correctionAmazing Grace was a PCYC boat Use to race against her there. Sent from my iPad On Dec 5, 2014, at 2:24 PM, Greg Arnold via CnC-List mailto:cnc-list@cnc-list.com>> wrote: The "reaching strut" is a spreader? On 12/5/2014 10:58 AM, Russ & Melody via CnC-List wrote: Hi

Re: Stus-List Annapolis/South River sail Saturday

Rum ... Preferably somewhere warm .. Grenada Sent from my iPad On Dec 12, 2014, at 5:56 PM, Chuck S via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Joel, What a great offer. 46 degree weather, but I'd love to join you for a sailing fix. I'll let you know later tonight. I'll bring some

Re: Stus-List Indigo is for sale.

Had a friend do the trip Toronto to Vancouver on his Alberg 30 years ago, I'd think Rich indigo would love it! And be more comfortable too! Sent from my iPad On Dec 16, 2014, at 1:38 PM, Frederick G Street via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Rich - sounds like time to get a Stu'

Re: Stus-List wishing you the best of Solstice

Sorry Rick 116 days 16 hours til Perception is launched ... Count down started at haul out Paul. :) On Dec 21, 2014, at 5:52 PM, Rick Taillieu via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Same to you Russ. Only 145 (ish) days until launch. I know, somebody had to start the countdown.

Re: Stus-List Adjustable Prop

Ron, They will be at the Toronto Boat Show – definitely something is wrong - Paul From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ron Ander via CnC-List Sent: Saturday, January 3, 2015 3:43 PM To: 'Jim Watts'; cnc-list@cnc-list.com Subject: Stus-List Adjustable Prop I have a

Re: Stus-List Broken Goose neck

We had garhauer make a new one in stainless when we put the solid vang on Not a fan of cast aluminum for the reason you saw Sent from my iPad On Jan 11, 2015, at 2:17 AM, Richard N. Bush via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I went to the boat to check on things and while sta

Re: Stus-List Sailing magazines

I get a bunch ... Cruising World and Blue Water sailing for destinations and gear info Yachting World on my iPad for dreaming And Gam, a local Canadian magazine for fun Helps the owner/editor is a friend (still pay though) Sent from my iPad > On Jan 20, 2015, at 1:03 PM, Joel Aronson via

Re: Stus-List Electronics deals?

Toronto WM is closed Oakville not yet. See what Mike at the Dock Shoppe (Genco location just off Queens Quay) or Fogh Marine in Port Credit have also. Sent from my iPad On Feb 18, 2015, at 5:12 PM, Stevan Plavsa via CnC-List mailto:cnc-list@cnc-list.com>> wrote: Holland Marine I know, th

Re: Stus-List C&C 33 MKII

Bradley, Have a 33-II also ... Have replaced all the sheaves with ones from garhauer - and all the sheet stoppers with Lewmars - match the halyards and stoppers. Over the 15 years we've had Perception we have replaced the engine and most other systems ... Love the boat! Congratulations. Paul.

Re: Stus-List CnC-List C&C 33 MKII

Brad, We had a lot of winches on Perception when we bought her needing servicing. I took them all off one fall, brought them home and thoroughly cleaned all the old grease out of them - many hours of soaking in Mineral spirits, and using a stiff brush. All were fine after, and worked great! Sub

Re: Stus-List (no subject)

Had new ones made for Perception by Mark Bruckmann, Bruckmann Yachts, his dad was one of the original 3 builders that formed C&C Ran the custom shop. They look great on the boat! Sent from my iPad On Feb 21, 2015, at 5:53 PM, Curtis via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I ne

Re: Stus-List Hatch repair

Check they are not bomars ... Our 85 was, replaced Them with Lewmar ocean series that fit the opening better. Pompanette have parts for Bomars. Paul. :) On Feb 24, 2015, at 6:58 PM, Robert H. via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I think my 1989 30 MKII has got Lewmar Superhatche

Re: Stus-List Forward hatches on the 1981 C&C30 MK1

Fellow who did my windows did the same Paul. :) > On Feb 24, 2015, at 6:32 PM, Lee Youngblood via CnC-List > wrote: > > Hi Peter, > > I had friends that circumnavigated and had their windows replaced in NZ. The > NZ folks just laughed at the American yachties every time they saw scre

Re: Stus-List Garhauer Rigid Boom Vang

We've had a Garhauer on Perception for over 10 years have been very pleased with it - have added a lot of other Garhauer stuff as a result - blocks, sheaves, traveller Always great price for great quality, and very helpful when you need custom things like sheaves, and goose necks. Paul F

Re: Stus-List GPS

I have a bad elf for my iPad mini – works great! Paul Fountain Perception II 1985 C&C 33-II k/cb Port Credit Yacht Club From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Monday, April 4, 2016 9:52 AM To: cnc-list@cnc-list.com Cc: Joel Aronson Sub

Re: Stus-List Depth transducer throughhull leak

Mike, Any chance to tighten the thru hull? Is it new or was it an existing? Sent from Outlook Mobile On Sun, Apr 24, 2016 at 3:48 PM -0700, "Michael Crombie via CnC-List" mailto:cnc-list@cnc-list.com>> wrote: Unfortunately my leak seems to be between the hull and the

Re: Stus-List C&C 37 centerboard

I have a 33-II with a centreboard whose pendant broke a couple of years ago. I had Rob From South Shore yachts make and install the new one. They had an eye fitting roll swagged on the lower end, which the fed down and attached with a pin to the board, then hand swagged 2 fittings to make the ey

Re: Stus-List Battery Posts

Steve, I'd check Canadian Tire, they have a selection of terminals many that don't require swaging. May have a post conversion too Sent from Outlook Mobile On Sun, May 8, 2016 at 6:34 AM -0700, "Stevan Plavsa via CnC-List" mailto:cnc-list@cnc-list.com>> wrote: Hi All

Re: Stus-List Battery Posts

Steve, The part you listed is a 3/8” adapter – but if that is the one you need, there are a number of Acklands Grainger locations in the GTA – and throughout Southern Ontario, have you checked with them? Paul Fountain Perception II 1985 C&C 33-II k/cb Port Credit Yacht Club From: CnC-List [mai

Re: Stus-List C&C Nutshell dinghy

PCYC also had them for their junior sail program Get Outlook for iOS On Sat, May 28, 2016 at 8:46 AM -0700, "Robert Mazza via CnC-List" mailto:cnc-list@cnc-list.com>> wrote: Actually, my recollection was that the Nutshell was an open dinghy not unlike the old Fly

  1   2   3   >