It stops and reverses quickly - don't be afraid of the throttle though, a good shot helps it and gets the flow over the rudder started, something I need when reversing out of my slip as it is a bit tight.
Paul Fountain Managing Director SeaSource Inc. Bookkeeping & IT Services. -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt, Mike via CnC-List Sent: Monday, March 7, 2016 1:08 PM To: cnc-list@cnc-list.com Cc: Hoyt, Mike <mike.h...@impgroup.com> Subject: Re: Stus-List best folding prop for 30 MK1 w/ A4 Paul And how is switching from forward to reverse? Does the boat stop quickly and start moving astern or si it like the martec where it keeps going forward for a long time? -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul Fountain via CnC-List Sent: Monday, March 07, 2016 2:05 PM To: cnc-list@cnc-list.com Cc: Paul Fountain Subject: Re: Stus-List best folding prop for 30 MK1 w/ A4 I'll second the Flex-o-fold - have one on Perception, works well in forward and reverse. Much better than the Campbell Sailor it replaced. Paul Fountain Perception II 1985 C&C 33-II k/cb Port Credit Yacht Club -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Nylander via CnC-List Sent: Monday, March 7, 2016 12:49 PM To: cnc-list@cnc-list.com Cc: Gary Nylander <gnylan...@atlanticbb.net> Subject: Re: Stus-List best folding prop for 30 MK1 w/ A4 When I was looking a number of years ago, I found the Flex-o-fold prop to be of better quality than the Gori. Smoother mechanism, finer machining, etc. Can't say much more because the Flex has been on the boat for over 10 years. Happy. Gary 30-1 Yanmar 2QM15. -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: Monday, March 7, 2016 12:15 PM To: 'cnc-list@cnc-list.com' <cnc-list@cnc-list.com> Cc: Della Barba, Joe <joe.della.ba...@ssa.gov> Subject: Re: Stus-List best folding prop for 30 MK1 w/ A4 Almost all A4s use a 7/8" shaft. Just FYI, I had a Martec folding prop and *hated it*. The ONLY good thing it did was fold up. Sounds like the Gori is better. joe Coquina C&C 35 MK I -----Original Message----- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of JP Mail via CnC-List Sent: Monday, March 07, 2016 11:22 To: cnc-list@cnc-list.com Cc: JP Mail Subject: Re: Stus-List best folding prop for 30 MK1 w/ A4 I'm sittin' on a maxprop 2 blade 13" 1" shaft prop right now. Came from a Nicholson 303. Works great, looks great. Pics if you want them. J Sent from my iPhone > On Mar 7, 2016, at 8:11 AM, Joe at Zialater via CnC-List <cnc-list@cnc-list.com> wrote: > > I received the blessing from the Admiral to equip Zia with a folding > prop this season. I have been looking at our options and the Gori 2 > blade geared prop 11.5 X 8 looks like it would do the job. > > Before I pull the trigger on this, I would like to check with the > list for opinions/experiences on brands, model etc. > > Currently we have a 2 blade fixed. > > Thanks a million. > > Joe > Zia > 30 MK1 > Annapolis > > > > _______________________________________________ > > Email address: > CnC-List@cnc-list.com > To change your list preferences, including unsubscribing -- go to the bottom of page at: > http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com > _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com _______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
