We have the turning blocks for the mast end up and down control at the top and bottom of the track.
Paul From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of J.R. Farrar via CnC-List Sent: June 26, 2014 4:13 PM To: cnc-list@cnc-list.com Subject: Re: Stus-List 1985 C&C-33-2 Front Plastic Mast Insert I recently purchased from SouthShore (last year) the pole car that fits that internal track. You should find stopper screws at the top and bottom that stop the car. J.R. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul Fountain via CnC-List Sent: Thursday, June 26, 2014 2:13 PM To: Raymond Macklin; cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Subject: Re: Stus-List 1985 C&C-33-2 Front Plastic Mast Insert Raymond, We also have a 1985 C&C 33-II. The plastic insert covers the spinnaker pole track that is part of the mast extrusion. My understanding is C&C made the spars, for parts try South Shore Yachts http://southshoreyachts.com/ talk to Rob Maclachlan, he used to work for C&C. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Raymond Macklin via CnC-List Sent: June 26, 2014 1:52 PM To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com> Subject: Stus-List 1985 C&C-33-2 Front Plastic Mast Insert Anyone: I have 1985 C&C-33-2 and in the front of the mast there is around a one inch plastic insert that runs the length of the mast. What is this for. If it is for a T-Track then what is the width of the track that belongs on the boat? Any information would be great. Ray LakeHouse Libertyville, IL
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
