> Could someone confirm if WDS and adhoc mode currently don't have support with
> this driver?
adhoc is working but not perfect, such as rate control not working, no
HT/VHT rate, and etc. You need to use the firmware version
999.999.0.636.
WDS should be working since 4 addresses has fixed by Mic
On 09/04/14 03:45, Matthew Fatheree wrote:
This adds support for Belkin/Linksys WRT1900AC Router Basic functionality
Belkin Inc. would like to announce the
patch submission release for WRT1900AC which is based on
OpenWRT trunk, the detail base revision is specified in
each release
This is the re
Le 08/04/2014 20:05, José Vázquez a écrit :
Make sure you have selected kmod-ltq-ptm-vr9 and kmod-ltq-atm-vr9
deselected in addition to a VR9 vdsl firmware.
In France I think they sticked on the ATM mode even for VDSL.
Is packet transfer mode mandatory for VDSL ?
The firm you need should be
Le 08/04/2014 20:05, José Vázquez a écrit :
Make sure you have selected kmod-ltq-ptm-vr9 and kmod-ltq-atm-vr9
deselected in addition to a VR9 vdsl firmware.
Thanks for the help.
Is kmod-ltq-ptm-vr9 only for the "packet transfer mode" ? If yes it will
not work - even on VDSL, ISP still use AT
Hi,
judging from Gerts mail domain he might well be stuck with the very
same provider i unfortunatelly signed a contract with. Small, local
German providers seem to be going for native ipv6 with dslite. That
allows them to grow even though they own a relatively small ipv4 pool.
Most users are prob
I am not an ipv6 expert at all but from what i understand it has to do
with the providers configuration that my "wan6" does not actually have
a routeable ipv6 addr.
On a subject related to that dslite setup i found another problem. I am
not sure what i am supposed to see on the overview page of lu
On 8 April 2014 23:00, Claudio Leite wrote:
> * Roman Yeryomin (leroi.li...@gmail.com) wrote:
>> On 8 April 2014 19:41, Claudio Leite wrote:
>> > * Roman Yeryomin (leroi.li...@gmail.com) wrote:
>> > I think by default it configures mdio as mdio--I had a mdio_pins group
>> > in my rt2880.dtsi, but
Hi Gert,
i find it very strange that your ISP doesn't offer public addresses on
the WAN interface however I think this is actually standards compliant
so we have to deal with it.
It's called "IPv4 exhaustion"... DS-Lite is one of the way to deal
with it (which effectively gives you "only one NA
This change does multiple things, all related to enable sparse usage as
a static analysis tool selectable from the OpenWrt configuration:
*add a KERNEL_SPARSE option in the config to add sparse to the kernel
build (through the C=1 option usage)
*add sparse as a new host tools. It will get selected
* Roman Yeryomin (leroi.li...@gmail.com) wrote:
> On 8 April 2014 19:41, Claudio Leite wrote:
> > * Roman Yeryomin (leroi.li...@gmail.com) wrote:
> > I think by default it configures mdio as mdio--I had a mdio_pins group
> > in my rt2880.dtsi, but when I submitted the patches I redid the
> > ether
Hi,
On Tue, Apr 08, 2014 at 08:22:45AM +0200, Steven Barth wrote:
> i find it very strange that your ISP doesn't offer public addresses on
> the WAN interface however I think this is actually standards compliant
> so we have to deal with it.
It's called "IPv4 exhaustion"... DS-Lite is one of t
Am 08.04.2014 08:03, schrieb Steven Barth:
> Hello Heiner,
>
> thanks, however overriding the kernel behavior is intentional as its handling
> of e.g. routes is very limited. Also getting address from both the kernel and
> through dhcpv6 to netifd to the kernel causes conflicts such as the ones
On 8 April 2014 19:41, Claudio Leite wrote:
> * Roman Yeryomin (leroi.li...@gmail.com) wrote:
>> On 8 April 2014 14:41, Claudio Leite wrote:
>> > Really funny timing-nobody seemed to be interested in rt2880 for a long
>> > time, and then we both fix it at the same time!
>>
>> Actually a friend of
On 08/04/2014 19:51, obconseil wrote:
> Hello,
>
>
> I would be interested by that too: I'm currently working on the
> same TD-W8970, using a annex-a ADSL2+ firmware. However, I lack
> VDSL2 annex-a firmware , as this standard has been recently allowed
> in France.
>
http://www.openreach.co.u
On 8 April 2014 16:39, Claudio Leite wrote:
> These patches fix Ethernet and wireless on rt2880 boards. I have tested
> on two systems with success.
>
> The last patch is made against Roman Yeryomin's previously-submitted,
> but not yet merged, pinctrl patch.
>
> Note that the board DTS must defin
On 04/08/2014 06:04 PM, Felix Fietkau wrote:
> On 2014-04-08 17:02, Bjørn Mork wrote:
>> Felix Fietkau writes:
>>
>>> I've seen this happen to other open source related projects using
>>> Marvell hardware as well, so the big question is whether Belkin can put
>>> enough pressure on them to get the
Broken after 40411
Signed-off-by: Roman Yeryomin
---
target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom | 1 +
1 file changed, 1 insertion(+)
diff --git
a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
b/target/linux/ramips/base-files/etc/hotplug.d/
Make sure you have selected kmod-ltq-ptm-vr9 and kmod-ltq-atm-vr9
deselected in addition to a VR9 vdsl firmware.
The firm you need should be into the TD-W8970 source code.
Regards.
2014-04-08 19:51 GMT+02:00, obconseil :
> Hello,
>
>
> I would be interested by that too: I'm currently working on t
Hello,
I would be interested by that too: I'm currently working on the same
TD-W8970,
using a annex-a ADSL2+ firmware.
However, I lack VDSL2 annex-a firmware , as this standard has been
recently allowed in France.
I could confirm that , when using my current firmware on a VDSL2 POTS ,
the
On 08/04/2014 19:05, Jonas Gorski wrote:
> I have no idea. This was just a guess on the part that all the
> other parameters are in this "bitfield" notion, so I assumed that
> this one works the same. Shouldn't the cpe-control sources tell you
> what they are good for?
>
yes but that takes too
Hello Rafal
I m aware with the source quality issue
And as answer to Luka concerning the "NEW PATCH version", we have sent a
new patches " [PATCH v2 00/10]" containing 10 patches that take account
the Luka remarks but he rejected them (the patches are not merged in the
freecwmp project).
Reg
On Tue, Apr 8, 2014 at 4:42 PM, John Crispin wrote:
>
>>> does anyone know how to force adsl or vdsl ? i tried -M1 and -M2
>>> but i got no showtime.
>>
>> Have you tried -M 0_1_0 or -M 0_0_2?
>>
>
> it is not a matter of trying random values but knowing what they mean
> and how to build the param
Just to check if it is listed on the channel.
2014-04-08 20:57 GMT+08:00 Hero huang :
> Just got a tplink wr881n couple days ago,which is qca9558 plus ar8236
> You can check the inside looks here:
> http://forum.anywlan.com/thread-271726-1-1.html
>
> I want to see openwrt running on this platfor
2014-04-08 16:43 GMT+02:00 KALLEL Mohamed :
> At the beginning, we tried to contribute to the freecwmp project
> (http://www.linux-mips.org/archives/freecwmp/2012-12/threads.html#00076) but
> we found that the contribution process takes time and we found that our way
> and methods does not correspo
2014-04-08 17:02 GMT+02:00, Bjørn Mork :
> Felix Fietkau writes:
>
>> I've seen this happen to other open source related projects using
>> Marvell hardware as well, so the big question is whether Belkin can put
>> enough pressure on them to get the source code released.
>>
>> Even if that happens,
2014-04-08 17:29 GMT+02:00 KALLEL Mohamed :
> Comparing to freecwmp, EasyCwmp is a complete cwmp client and it's fully
> conform with the TR069 standard.
>
> freecwmp has a good source structure, In fact EasyCwmp is derived from
> freecwmp project thanks to the source structure. we chose to continu
On 2014-04-08 17:02, Bjørn Mork wrote:
> Felix Fietkau writes:
>
>> I've seen this happen to other open source related projects using
>> Marvell hardware as well, so the big question is whether Belkin can put
>> enough pressure on them to get the source code released.
>>
>> Even if that happens,
Hi Rafal
Comparing to freecwmp, EasyCwmp is a complete cwmp client and it's fully
conform with the TR069 standard.
freecwmp has a good source structure, In fact EasyCwmp is derived from
freecwmp project thanks to the source structure. we chose to continue
the development of freecwmp in a new
Felix Fietkau writes:
> I've seen this happen to other open source related projects using
> Marvell hardware as well, so the big question is whether Belkin can put
> enough pressure on them to get the source code released.
>
> Even if that happens, the source code will most likely need a rewrite
Hi Luka
In our company we really appreciate the freecwmp project because it has
a good source structure. In fact EasyCwmp is derived from freecwmp
project (git revision a13ccb5097d5c8445927f85529ec2322ed968852 date
2012/12/23)
At the beginning, we tried to contribute to the freecwmp project
>> does anyone know how to force adsl or vdsl ? i tried -M1 and -M2
>> but i got no showtime.
>
> Have you tried -M 0_1_0 or -M 0_0_2?
>
it is not a matter of trying random values but knowing what they mean
and how to build the parameters from uci.
what do those parameters do that you listed
On Tue, Apr 8, 2014 at 3:34 PM, John Crispin wrote:
> Hi,
>
> i have been playing with the TD8970 the last few days and tried to
> bring it online on a deutsche telekom adsl annex-b line. unfortunately
> i have totally failed so far. i managed to get the unit into showtime
> on my dslam using vdsl
This patch is made against Roman Yeryomin's previously-submitted,
but not yet merged, rt2880 DT pinctrl patch.
Signed-off-by: Claudio Leite
---
target/linux/ramips/dts/rt2880.dtsi | 8
1 file changed, 8 insertions(+)
diff --git a/target/linux/ramips/dts/rt2880.dtsi
b/target/linux/rami
Use pr_debug rather than pr_info since it is only relevant
for debugging.
Signed-off-by: Claudio Leite
---
.../0220-NET-ralink-squelch_mdio_access.patch | 22 ++
1 file changed, 22 insertions(+)
create mode 100644
target/linux/ramips/patches-3.10/0220-NET-ralink-squelc
Probing the wireless device will fail without it, as the rt2800-soc
driver needs to check if the device has a 20MHz clock crystal.
The chip on the RT2880 boards uses 40MHz as far as I can tell.
Signed-off-by: Claudio Leite
---
.../patches-3.10/0219-rt2880_wmac_clock.patch | 21
This just enables the existing function, allowing port
settings to be made via the board's DTS.
Signed-off-by: Claudio Leite
---
.../patches-3.10/0218-NET-ralink-init_rt2880_port.patch | 12
1 file changed, 12 insertions(+)
create mode 100644
target/linux/ramips/patches-3.10/
These patches fix Ethernet and wireless on rt2880 boards. I have tested
on two systems with success.
The last patch is made against Roman Yeryomin's previously-submitted,
but not yet merged, pinctrl patch.
Note that the board DTS must define the port and PHY to connect to.
Here's an example for a
Hi,
i have been playing with the TD8970 the last few days and tried to
bring it online on a deutsche telekom adsl annex-b line. unfortunately
i have totally failed so far. i managed to get the unit into showtime
on my dslam using vdsl however. i also talked to people that have the
driver/firmware
Just got a tplink wr881n couple days ago,which is qca9558 plus ar8236
You can check the inside looks here:
http://forum.anywlan.com/thread-271726-1-1.html
I want to see openwrt running on this platform. I tried flash wr1043nd-v2
image into it,seeing that wireless is ok.
Then I happen to see a guy
On Tue, Apr 8, 2014 at 2:14 PM, Helmut Schaa
wrote:
> On Tue, Apr 8, 2014 at 4:47 AM, Stijn Tintel wrote:
>> This patch, taken from upstream commit
>> 96db9023b881d7cd9f379b0c154650d6c108e9a3, fixes the Heartbleed bug
>> (CVE-2014-0160).
>
> IMHO it would make sense to update to 1.0.1g instead. A
On Tue, Apr 8, 2014 at 4:47 AM, Stijn Tintel wrote:
> This patch, taken from upstream commit
> 96db9023b881d7cd9f379b0c154650d6c108e9a3, fixes the Heartbleed bug
> (CVE-2014-0160).
IMHO it would make sense to update to 1.0.1g instead. At least I've done that
in my local tree ...
Helmut
> Signed-
On 2014-04-08 00:31, Fernando Frediani wrote:
> Reading all this discussion around WRT1900ac makes me wonder of something:
>
> - When Belkin acquired Linksys and announced WRT1900ac they made a big
> noise (marketing) about "OpenWRT compatibility" so they are using the
> project's name for their
On 8 April 2014 14:37, Claudio Leite wrote:
> Hi Roman,
>
> * Roman Yeryomin (leroi.li...@gmail.com) wrote:
>> This fixes gpio to the state when gpio leds and buttons start to work but
>> something still broken for ethernet part (mdio?).
>
> I was actually about to submit a fix for this exact pro
Hi Roman,
* Roman Yeryomin (leroi.li...@gmail.com) wrote:
> This fixes gpio to the state when gpio leds and buttons start to work but
> something still broken for ethernet part (mdio?).
I was actually about to submit a fix for this exact problem. Your GPIO
fix is identical to mine (I actually su
This fixes gpio to the state when gpio leds and buttons start to work but
something still broken for ethernet part (mdio?).
Externet switch is detectable and configurable, packet counters change but
looks like there is no connection between rt2880 and external switch.
Wireless appears to be broke
The last arg to FUNC() is count, not last pin.
Signed-off-by: Roman Yeryomin
---
target/linux/ramips/patches-3.10/0217-pinmux-rt2880.patch | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/target/linux/ramips/patches-3.10/0217-pinmux-rt2880.patch
b/target/linux/ra
Ping? :)
http://patchwork.openwrt.org/patch/5037/
-Toke
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Signed-off-by: Roman Yeryomin
---
target/linux/ramips/image/Makefile | 16 +---
1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/target/linux/ramips/image/Makefile
b/target/linux/ramips/image/Makefile
index c6a42ad..63f7425 100644
--- a/target/linux/ramips/image/Makefile
Hi,
I recently have been testing some 802.11ac hardware with the ath10k.
Could someone confirm if WDS and adhoc mode currently don't have support with
this driver?
Thanks,
Bruno
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https:/
On 2014-04-08 12:04, Bastian Bittorf wrote:
> while working with different routers, i recognized that
> e.g. using adhoc/IBSS + AP on 1 radio is generally supported
> with mac80211 but limited by driver. e.g. ath9k works,
> rt2800/rt2x00 does not work (r40352/fonera2.0n).
>
> because we have some
while working with different routers, i recognized that
e.g. using adhoc/IBSS + AP on 1 radio is generally supported
with mac80211 but limited by driver. e.g. ath9k works,
rt2800/rt2x00 does not work (r40352/fonera2.0n).
because we have some "presets" in our community-firmware,
it would be good to
Hi Mohamed,
On Mon, Apr 07, 2014 at 06:04:56PM +0200, MOHAMED Kallel wrote:
> Add new package. Its name is easycwmp. easycwmp is a GPLv2 open
> source implementation of the TR069 cwmp standard. easycwmp is a
> complete cwmp client fully conform with the TR-069 standrad
Can you please provide a
2014-04-07 18:04 GMT+02:00 MOHAMED Kallel :
> Add new package. Its name is easycwmp. easycwmp is a GPLv2 open source
> implementation of the TR069 cwmp standard. easycwmp is a complete cwmp
> client fully conform with the TR-069 standrad
Have you tried to participate in freecwmp project? Were
Hey Steven,
thanks for the patch, it works with just peeraddr and proto in the
config. And it confirms that hours of trying to get my config right
where nothing but learning time ;).
regards,
Henning
On Tue, 08 Apr 2014 08:22:45 +0200
Steven Barth wrote:
> Hello Henning,
>
> i find it very st
It's not difficult. If you want to add an atheros option look into the
Makefile the better place for it. This link points to one of the ath
sections:
https://dev.openwrt.org/browser/trunk/package/kernel/mac80211/Makefile#L494
You see Linux-3.10.34 Kconfig items because it is patched for the
kerne
Le 08/04/2014 08:37, Steven Barth a écrit :
Applied, thanks. Will probably take care of AA later today.
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
Does it mean that t
56 matches
Mail list logo
