On 08/04/2014 19:51, obconseil wrote: > Hello, > > > I would be interested by that too: I'm currently working on the > same TD-W8970, using a annex-a ADSL2+ firmware. However, I lack > VDSL2 annex-a firmware , as this standard has been recently allowed > in France. >
http://www.openreach.co.uk/orpg/home/products/super-fastfibreaccess/super-fastfibreaccess/landrgnu.do "ECI Arcadyan VDSL modem" has the a and b fw inside the dl/ folder > I could confirm that , when using my current firmware on a VDSL2 > POTS , the synchronisation is established on ADSL2+, not VDSL2. try adding -M2 to the vdsl_cpe_control and make the last 2 bytes of the xtu _01_07 i think that will force vdsl. > > Besides, I still have some problems linked to the Wifi chipset that > hang after a while, and with a *very* long boot that seems to be > related to the internal switch, which is reseted multiple time > during bootup (GPIO-related ? I do not see any driver for this > switch). the spi driver fails on this unit and we are using gpio-spi bit banging :) i will look at the spi irq issue when i am done with vdsl John _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
