On Tue, Apr 8, 2014 at 3:34 PM, John Crispin <j...@phrozen.org> wrote: > Hi, > > i have been playing with the TD8970 the last few days and tried to > bring it online on a deutsche telekom adsl annex-b line. unfortunately > i have totally failed so far. i managed to get the unit into showtime > on my dslam using vdsl however. i also talked to people that have the > driver/firmware running on British Telecom, KPN, 1&1 as vdsl and adsl. > > for the adsl driver we have a nice list of all the various xtu bits. > for the vdsl driver they seem to be different.
Afaik the xtu bits are for both ADSL and VDSL - this is basically a big bitfield enabling different modes (Annex A ADSL1, Annex B ADSL1, etc). > there are also 2 new options > > -M 0_1_2 the modes it should try > > 0 - none ?! > 1 - adsl > 2 - vdsl > > i understand this as it will loop over the provided sequence and try > to get show time using it. > > -T 4_0_1 - the tc layer to use > > > > -i10_00_10_00_00_04_01_07 -T4_0_1 is confirmed working on the 1&1 line > -i10_00_10_00_00_04_01_07 works on my vdsl dslam > -i10_00_10_00_00_04_00_00 is set by the td8970 firmware for annex-b > -i05_00_04_00_0C_01_00_00 is set by the td8970 firmware for annex-a > > has any one managed to get this working on deutsche telekom adsl lines ? Do you have a annex b or annex j line? this makes a diference for the xtu bits to enable. > does anyone know how to force adsl or vdsl ? i tried -M1 and -M2 but i > got no showtime. Have you tried -M 0_1_0 or -M 0_0_2? Regards Jonas _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
