Use pr_debug rather than pr_info since it is only relevant
for debugging.
Signed-off-by: Claudio Leite <lei...@staticky.com>
---
.../0220-NET-ralink-squelch_mdio_access.patch | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644
target/linux/ramips/patches-3.10/0220-NET-ralink-squelch_mdio_access.patch
diff --git
a/target/linux/ramips/patches-3.10/0220-NET-ralink-squelch_mdio_access.patch
b/target/linux/ramips/patches-3.10/0220-NET-ralink-squelch_mdio_access.patch
new file mode 100644
index 0000000..bc92a02
--- /dev/null
+++ b/target/linux/ramips/patches-3.10/0220-NET-ralink-squelch_mdio_access.patch
@@ -0,0 +1,22 @@
+Index: linux-3.10.34/drivers/net/ethernet/ralink/mdio_rt2880.c
+===================================================================
+--- linux-3.10.34.orig/drivers/net/ethernet/ralink/mdio_rt2880.c
++++ linux-3.10.34/drivers/net/ethernet/ralink/mdio_rt2880.c
+@@ -136,7 +136,7 @@ int rt2880_mdio_read(struct mii_bus *bus
+ if (err)
+ return 0xffff;
+
+- pr_info("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
++ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
+ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
+
+ return fe_r32(FE_MDIO_ACCESS) & 0xffff;
+@@ -148,7 +148,7 @@ int rt2880_mdio_write(struct mii_bus *bu
+ int err;
+ u32 t;
+
+- pr_info("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
++ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__,
+ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff);
+
+ err = rt2880_mdio_wait_ready(priv);
--
1.8.2.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
