Just to check if it is listed on the channel.

2014-04-08 20:57 GMT+08:00 Hero huang <hero18...@gmail.com>:

> Just got a tplink wr881n couple days ago,which is qca9558 plus ar8236
> You can check the inside looks here:
> http://forum.anywlan.com/thread-271726-1-1.html
>
> I want to see openwrt running on this platform. I tried flash wr1043nd-v2
> image into it,seeing that wireless is ok.
> Then I happen to see a guy who did a mod openwrt call rippleOS which can
> support this machine.But he is not willing to open source.
> Here is the boot log of his firmware:
> http://pastebin.com/raw.php?i=mZ21j6mF
> [    0.690000] eth0: Atheros AG71xx at 0xb9000000, irq 4
> [    1.270000] eth0: Atheros AR8236 switch driver attached.
> [    2.420000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:00
> [uid=004dd043, driver=Atheros AR8216/AR8236/AR8316]
> I noticed these lines and started to mod wr1043nd-v2's mach,which is a
> qca9588+ar8237n.And the mach looks like this now:
> http://notepad.cc/share/Did7a2ZHNQ
>
> Here is wr881n's ttl boot log with my mod:
> http://notepad.cc/share/rMjp6FiCBx
>
> ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.1:04 [uid=00000000,
> driver=Generic PHY]
>
> PHY is found at place.But ar8236 driver is not attached.
>
> I wish some guru can help me get this freaking driver attached.
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

Reply via email to