I am not an ipv6 expert at all but from what i understand it has to do with the providers configuration that my "wan6" does not actually have a routeable ipv6 addr.
On a subject related to that dslite setup i found another problem. I am not sure what i am supposed to see on the overview page of luci. But i certainly would like to see the routers current ipv6 addr, which i do not see because my wan6 interface does not have one. I can derive it from the dhcpv6 leas section if dhcpv6 clients are connected, but that is not really what one would expect. /usr/lib/lua/luci/view/admin_status/index.htm does not really seem to allow me to configure another interface for that section. The ipv6 section should show my current prefix, ip and a ticking clock for the current leas. Henning On Tue, 08 Apr 2014 08:22:45 +0200 Steven Barth <cy...@openwrt.org> wrote: > Hello Henning, > > i find it very strange that your ISP doesn't offer public addresses > on the WAN interface however I think this is actually standards > compliant so we have to deal with it. > > please see: https://dev.openwrt.org/changeset/40422 > I added an option "weakif" which allows you to specify an interface > from which we take the local IPv6 address defaulting to "lan". > > Cheers, > > Steven > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
