Just got a tplink wr881n couple days ago,which is qca9558 plus ar8236 You can check the inside looks here: http://forum.anywlan.com/thread-271726-1-1.html
I want to see openwrt running on this platform. I tried flash wr1043nd-v2 image into it,seeing that wireless is ok. Then I happen to see a guy who did a mod openwrt call rippleOS which can support this machine.But he is not willing to open source. Here is the boot log of his firmware: http://pastebin.com/raw.php?i=mZ21j6mF [ 0.690000] eth0: Atheros AG71xx at 0xb9000000, irq 4 [ 1.270000] eth0: Atheros AR8236 switch driver attached. [ 2.420000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd043, driver=Atheros AR8216/AR8236/AR8316] I noticed these lines and started to mod wr1043nd-v2's mach,which is a qca9588+ar8237n.And the mach looks like this now: http://notepad.cc/share/Did7a2ZHNQ Here is wr881n's ttl boot log with my mod: http://notepad.cc/share/rMjp6FiCBx ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.1:04 [uid=00000000, driver=Generic PHY] PHY is found at place.But ar8236 driver is not attached. I wish some guru can help me get this freaking driver attached.
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
