Re: Stus-List Keel Bolt Overtightening?

-albums4681-picture26184.html Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanleys in barrington From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Eugene Fodor via CnC-List Sent: Thursday, April 20, 2017 2:35 PM To: cnc-list Cc: Eugene Fodor Subject:

Re: Stus-List WESTERBEKE VS ATOMIC HEAT EXCHANGER

You need another pump, usually driven off flywheel. I have some spare A4 FWC stuff if he is interested. Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanleys in barrington -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alex Giann

Re: Stus-List Windlass placement

rusty so I had to part it out. Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanleys in Barrington From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of jacob fuerst via CnC-List Sent: Sunday, March 26, 2017 12:20 PM To: cnc-list@cnc-list.com Cc: jacob fu

Re: Stus-List Prop Pullers

appropriate length bolts you could have a 10$ puller. Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanleys in barrington From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt, Mike via CnC-List Sent: Wednesday, March 22, 2017 8:48 AM To: cnc-list@cnc-list

Re: Stus-List Wind Turbine / Generators

/ Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanleys in Barrington From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Chuck Gilchrest via CnC-List Sent: Thursday, February 23, 2017 1:46 PM To: cnc-list@cnc-list.com Cc: Chuck Gilchrest Subject: Re:

Re: Stus-List Battery test

by the monitor is no longer reliable. Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanleys in barrington From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Marek Dziedzic via CnC-List Sent: Tuesday, February 07, 2017 11:23 AM To: cnc-

Re: Stus-List weeping hull

hull I got a stream of water pouring out. A stream that was in one case initially shooting 3” high when I first drilled it. Good luck. Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanleys in Barrington From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behal

Re: Stus-List Baltimore/Annapolis wet deck repair

with Coosa board. A lot of late nights but it came out great and it will never have to be done again. http://www.cruisersforum.com/forums/f55/replacing-wet-balsa-core-160820.html Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanleys in barrington From:

Re: Stus-List Sundowner is for sale

the one on sailboat listings in St. Augustine? On 9/26/2016 11:48 AM, Petar Horvatic via CnC-List wrote: After 13 years I am moving on. My offer for Tayana FD-12 was accepted in FL. I was never really good at showing off my work, but I added few albums on Cruisers forum to document some o

Stus-List Sundowner is for sale

will be there for another month or so. http://www.sailboatlistings.com/view/61491 Petar Horvatic Sundowner 76 C&C 38MkII Newport RI ___ This list is supported by the generous donations of our members. If you like what w

Re: Stus-List Open CPN

difficult without a mouse. I have a 12V PC for that, with external GPS via serial port, running windows version of OpenCPN. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List

Re: Stus-List Electrical Question

looking up to see the tri-color. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: Joel Aronson [mailto:joel.aron...@gmail.com] Sent: Monday, September 12, 2016 10:21 AM To: cnc-list@cnc-list.com Cc: Petar Horvatic Subject: Re: Stus-List Electrical Question So if

Re: Stus-List Electrical Question

is more important than if red/green are below or above the steaming light. Tri-color takes priority for overnight crossings and offshore passages regardless of what the rules are, especially if going solo. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI -Original Message-

Re: Stus-List Window Leak

2209190> &d=1472209190 Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of mike amirault via CnC-List Sent: Tuesday, August 30, 2016 4:11 PM To: cnc-list@cnc-list.com Cc: amira...@bellaliant.net Subject: Re:

Re: Stus-List Solar Charging -- Normal?

. Petar Horvatic Sundowner 76 C&C 38MkII Newport RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Della Barba, Joe via CnC-List Sent: Tuesday, August 30, 2016 11:21 AM To: 'cnc-list@cnc-list.com' Cc: Della Barba, Joe Subject: Re: Stus-List Solar Char

Re: Stus-List Refinishing companionway steps

varnished b/c it releases oils. But how do you get the finish look on the cockpit table? Petar Horvatic Sundowner 76 C&C 38MkII Newport RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stevan Plavsa via CnC-List Sent: Monday, August 29, 2016 2:33 PM To:

Re: Stus-List Goosneck on 1977 38 MkII

. I have a 4 month hold and an 8 year old onboard. So we take it slow. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Richard N. Bush via CnC-List Sent: Tuesday, August 02, 2016 12:21 PM To: cnc-list

Re: Stus-List Goosneck on 1977 38 MkII

401 965-5260 On Aug 1, 2016, at 09:06, Petar Horvatic via CnC-List wrote: I am going to need a new gooseneck. Mine was a single aluminum piece with two loops. Top one broke off. Boom fitting had an offset set of loops and a single 5/8” stainless pin was holding everything together. Now

Stus-List Goosneck on 1977 38 MkII

have to replace theirs and how did they go about it? Petar Horvatic Sundowner 76 C&C 38MkII Newport RI ___ This list is supported by the generous donations of our members. If you like what we do, please help us pay for our cost

Re: Stus-List Alternator Failure

the house select switch to off while engine was running. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gary Russell via CnC-List Sent: Tuesday, June 21, 2016 10:25 AM To: C&C List Cc: Gary Russell

Re: Stus-List Lifeline netting

faster than you want. Also in the offseason, if you don’t shrink-wrap the boat, I would take the netting off. It’s a pain but it saves years of weathering. Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanleys in barrington From: CnC-List [mailto:cnc-list-boun...

Re: Stus-List West System cored hull time to cure

you decide transducer is no good. Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanleys in Barrington From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List Sent: Monday, May 02, 2016 10:26 AM To: cnc-list@cnc-list.com Cc: Joel Aronson Sub

Re: Stus-List Scanmar Emergency Rudder MRUD

has water vane, wooden windvane and frame with control gears and swivel mechanism. MRUD is an additional feature that allows you to use Monitor as emergency rudder. I don't know anything about the MRUD option. Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanleys in Barrington RI

Re: Stus-List Cutlass bearing size issue

I just did mine in December. I pressed it out first. Then took the measurement. Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanleys in barrington From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul Fountain via CnC-List Sent: Friday, Februar

Re: Stus-List Cutlass bearing size issue

I just did mine and it was also a bit off at the ends. So I got a true strut ID once I pressed the bearing out. Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanleys in barrington From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson

Re: Stus-List Butyl tape

McMaster has it, but the bummer is they only have black. http://www.mcmaster.com/#butyl-rubber-tape/=111tufe From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Charlie Nelson via CnC-List Sent: Tuesday, February 09, 2016 10:29 AM To: cnc-list@cnc-list.com Cc: cenel...@ao

Re: Stus-List repairing large wet deck core areas

enoa cars getting stuck on the track due to deck transitions. Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanley’s in Barrington From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Hoyt, Mike via CnC-List Sent: Wednesday, February 03, 2016 1:23 PM

Stus-List now sailrite RE: ab inflatables

And sew yourself a dinghy cover. Tropical sun will disintegrate anything. For circumnavigation Sailrite sewing machine is worth its weight in gold. Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanley’s in Barri

Re: Stus-List ab inflatables

aluminum is even lighter and I would imagine even more erratic while moving at plaining speeds. Stay away from PVC. And sew yourself a dinghy cover. Tropical sun will disintegrate anything. For circumnavigation Sailrite sewing machine is worth its weight in gold. Petar Horvatic

Stus-List repairing large wet deck core areas

lies. I can foresee potential issues with the car not riding smoothly in area of that transition. Thanks Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanley’s in Barrington ___ Email address: CnC-List@cnc-list.com To ch

Re: Stus-List Barient 28ST on EBay

myself in the same predicament after few years. Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanley’s in Barrington, RI. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman via CnC-List Sent: Monday, January 25, 2016 11:31 AM To: cnc-

Re: Stus-List replacing a wheel autopilot motor

part had to be cost-effective. Back then, they were not worried about customer potentially doing this. Nowdays, companies are making an effort to prevent this type of stuff. But all my electronics systems are old and I try to keep them working, so this is great. Petar Horvatic Sun

Re: Stus-List Where to locate water maker on Landfall 38?

100. She would call it a little salty. Which was bs. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: Robert Boyer [mailto:dainyr...@icloud.com] Sent: Monday, December 07, 2015 9:17 AM To: Petar Horvatic Cc: cnc-list@cnc-list.com; Daniel Sheer Subject: Re: Stus-Lis

Re: Stus-List Where to locate water maker on Landfall 38?

. On the other hand WMs need to be run. So if you are prepared to spend the energy, running smaller(20”) membrane(s) twice as long keeps them less prone to microbial growth. So long as you run it and flush it every week. Petar Horvatic Sundowner 76 C&C 38MkII Newport

Re: Stus-List Photo album ads & other stuff

I'm sort of in a same boat. I can't log into photoalbum to contact Mark Janda. Retrieve password or register gives me a PHP error. I would be interested in Garhauer solid vang and fittings. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [m

Re: Stus-List Balsa core thickness

, but it needs to be done. Did anyone use expandable polyurethane foam for coring? Merton’s Fiberglass sells it. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Andrew Burton via CnC-List

Re: Stus-List Hot water tank

never heated any water but I was not expecting it. I am using to dump access wind generator power on sunny days when solars have already filled the house bank. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of

Re: Stus-List Survey Question

Few places I know in RI include power washing in the haul out fee. You don't really get a breakdown of cost. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rick Brass via CnC-List Sent: Wednesday,

Re: Stus-List plumbing...

point where hot side hose comes off at the waterheater, prompting me to turn the pressure off when motoring. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of dwight veinot via CnC-List Sent: Friday, Augus

Stus-List baby stay on a 38Mk2

inner forestay with ¼” wire rope, and running backstays so I have support at the second spreader, but if I leave it for the offseason, this crack will linger in the back of my mind every time I head out. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto

Re: Stus-List Landfall 38 restoration project

I would not call the person a FOOL. If he/she knows what they are buying for 4k and have the knowledge and are willing to put the work, that person is a genius. From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of PME via CnC-List Sent: Wednesday, July 29, 2015 1:05 PM To:

Re: Stus-List hypalon glue

punctured tube. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Daniel Sheer via CnC-List Sent: Tuesday, July 21, 2015 7:08 PM To: Cnc-list CNC Boat Owners Cc: Daniel Sheer Subject: Stus-List hypalon

Re: Stus-List westerbeake sucking in air on a half tank

. Anyone know what minimum size intake fuel line should be for a 40HP diesel. W40? I am just wondering if that line is too small so at high RPM engine might be starving. It appears to be either 3/16” or ¼”. I have to double check. Thanks. Petar Horvatic Sundowner 76 C&C 38

Re: Stus-List westerbeake sucking in air on a half tank

mine! Joel 35/3 Annapolis On Mon, Jul 6, 2015 at 9:36 AM, Petar Horvatic via CnC-List wrote: So if the pickup was blocked, why on both occasions after bleeding(once in calm water and second time in rough water but after adding 5 more gallons to the tank) it ran without a problem for h

Re: Stus-List westerbeake sucking in air on a half tank

the tank is better than mine! Joel 35/3 Annapolis On Mon, Jul 6, 2015 at 9:36 AM, Petar Horvatic via CnC-List wrote: So if the pickup was blocked, why on both occasions after bleeding(once in calm water and second time in rough water but after adding 5 more gallons to the tank) it ran

Re: Stus-List westerbeake sucking in air on a half tank

same conditions. I guess I should check to make sure fuel gauge is calibrated, although I’ve been using it the past 3-4 years. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI ___ Email address: CnC-List@cnc-list.com To change y

Stus-List westerbeake sucking in air on a half tank

check to make sure fuel gauge is calibrated, although I’ve been using it the past 3-4 years. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI ___ Email address: CnC-List@cnc-list.com To change your list preferences, inclu

Stus-List Main sail slides

their mainsail track using something like this http://www.sailcare.com/sail-track-system.shtml Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley via CnC-List Sent: Tuesday, June 23, 2015 10:3

Re: Stus-List Cabin Top traveller on 38Mk II

. For where traveler needs to be, I will have to think how to achieve this. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: Edward Levert [mailto:weeselev...@gmail.com] Sent: Monday, March 30, 2015 11:43 AM To: Dennis C.; cnc-list@cnc-list.com Cc: Petar Horv

Stus-List Cabin Top traveller on 38Mk II

very annoying and always in a way, however the backing is very solid. Cabin top on the other hand does not look very sturdy as a way to provide mainsheet traveler attachment. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI __

Re: Stus-List FYI 5200

Few years back I bought one of those, forgot if it was from Lowes or HD, and it was rock solid when I tried to use it. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Bill Coleman via CnC-List Sent: Wedne

Re: Stus-List 1976 C&C 38 Electrical Panel

resh 10AWG from panel to a high buss bar capable of feeding everything that is connected to it. Every load should be appropriately fused. So 100Amp fuse will likely not protect against fire causing fault caused by your fridge. Petar Horvatic Sundowner 76 C&C 38MkII New

Re: Stus-List 1976 C&C 38 Electrical Panel

voltage drops for all your loads. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Dennis C. via CnC-List Sent: Wednesday, March 11, 2015 11:07 PM To: Joseph Scott; CnClist Subject: Re: Stus-List 1976 C&

Re: Stus-List Boat Review: C&C 30 - SAIL Magazine

Hauled out at Stanleys in Barrington RI for the winter. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ken Heaton via CnC-List Sent: Tuesday, March 10, 2015 2:44 PM To: cnc-list Subject: Stus-List

Re: Stus-List 34 offshore

Same thing for going west in late afternoon. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Frederick G Street via CnC-List Sent: Thursday, January 29, 2015 11:17 AM To: cnc-list@cnc-list.com Subject: Re

Re: Stus-List Pics of my mast head and spreaders

amounts of silicone on the cotter pin to cover sharp edges. Other than that, I try not to tape anything. Not any more for the reasons you’ll find once you take that mummy apart. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...

Re: Stus-List 2 unrelated questions:

Are you planning on purchasing off the shelf 12V refrigeration kit or building your own? When you live aboard do you plan to sail or just stay in one place? Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behal

Stus-List Boat stands and draining deck water while on the stands.

as anyone done this or will doing this disturb how the keel sits on the wooden blocks? My thought was to just prop the aft ones but then I realized that they all need to be adjusted slightly. Petar Horvatic Sundowner 76 C&C 3

Re: Stus-List Fuel

sel from a high traffic truck stop fuel station, you are more likely to get good quality diesel that was not sitting for too long. I am curious what other think in terms of the two sources of diesel. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI -Original Message- From: CnC-Li

Re: Stus-List Holding tank discharge hose

sanitation hose with PVC. To keep PVC from cracking, use small section of sanitation hose at the ends of each run to absorb vibration. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Joel Aronson via CnC-List

Re: Stus-List Metallurgy

deeply etched into my brain. I spent many sleepless nights thinking about them and I will forever look at them from a different point of view. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: Burt Stratton [mailto:bstrat...@falconnect.com] Sent: Monday, Novembe

Re: Stus-List Metallurgy

Aluminum plate + stainless fasteners + bilge water = electrolysis at its best. And add to that a very crappy, and inadequate float switch and rule pump lead wires (if you happen to have those), and it gets even more fun. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI

Re: Stus-List C&C smile fix - how I did it

And if you are in the northern climate and are pulling the boat out for the winter, add a garboard drain plug to let water out of the bildge before it freezes and causes more cracks. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI -Original Message- From: CnC-List [mailto:cnc-

Stus-List Graveyard of the atlantic claims another

This time tug sank off Point Judith, barge still attached to it. http://www.providencejournal.com/news/police-fire/20141023-barge-still-offsh ore-after-rescue-of-tugboat-crew.ece Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI ___

Re: Stus-List Newport Harbor mooring wanted

e some of the on-the-hook live-aboard folks unhappy. They organized occupy Newport harbor event about a month ago. I'm not sure how it went. My mooring is commercial which means I can have anyone stay there paying or not. I don't have my contract in front of me but I believe its through No

Re: Stus-List Newport Harbor mooring wanted

You are welcome to grab mine #284. South west corner of main harbor.Let me know if you need more details.. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny Haughey via CnC-List Sent: Monday, Octobe

Re: Stus-List winterizing the PYI shaft seal

ith a point set. I am yet to see how they fit. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Eric Frank via CnC-List Sent: Friday, October 17, 2014 1:22 PM To: cnc-list@cnc-list.com

Re: Stus-List Mast Self-Climbers?

there to belay the safety halyard for the way up and down. But I was able to pull my weight without a problem. It takes a bit getting used to and always have a safety line. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list

Re: Stus-List thread reply and rod rigging

But so can be mistakes with many other boat systems. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ron Casciato via CnC-List Sent: Monday, October 13, 2014 12:51 PM To: 'Dennis C.'; cnc-list

Re: Stus-List Boat Batteries

basis. And on a side note, this article convinced me to not take the batteries home during winter storage. Not even to trickle charge them while on the boat. Instead just disconnect them from everything. http://www.pbase.com/mainecruising/self_discharge Petar Horvatic

Re: Stus-List Boat Batteries

.Their internal resistance is very low so they don’t heat up much during charge or voercharge. Hope you get better luck this time. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: honeysail...@gmail.com [mailto:honeysail...@gmail.com] On Behalf Of Jack Fitzge

Re: Stus-List Boat Batteries

monitors, the ones that show accumulated Ah are essential in knowing what you’re are doing to your batteries. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jack Fitzgerald via CnC-List

Re: Stus-List Mast removal for winter?

s few guys at 90$ per hour, ends up being not that bad. One year I made a mistake of letting the yard do all of the work for me and got a 1800$ mast decommissioning bill. This was about 15 years ago so I imagine it would be even higher now. Petar Horvatic Sundowner 76 C&C 38MkII Ne

Re: Stus-List Mast removal for winter?

anchor light. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Ron Casciato via CnC-List Sent: Monday, September 22, 2014 3:13 PM To: 'Hoyt, Mike'; cnc-list@cnc-list.com Subject: Re:

Re: Stus-List TAZ, Cutty

Not sure about TAZ but you will see red C&C 36 named Stinger, that’s my friend Kyle. He is inside. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Danny Haughey via CnC-List Sent: Thursday, Sept

Re: Stus-List blown alternator diode

in the order 500V or higher (usually the case with rectifying ICs as they are cheaper and smaller form factor) they tend to fail. Hope that helped clarify what’s going on inside the alternator casing. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-

Re: Stus-List Ok more atomic 4 issues...dammit!

ignition, and an appropriate coil. You can find them around 100$ or so. Make sure wires and sparkplugs are good quality. Distributor cap and rotor should have nice clean contacts. Have few spare coils. How is your oil pressure? Petar Horvatic Sundowner 76 C&C 38MkII Newport

Re: Stus-List Shannon 38

work inside. Still I could not see myself spending that much in the 70s interior design. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of bobmor99 . via CnC-List Sent: Tuesday, August 12, 2014 8:23 PM

Re: Stus-List Dingy Repair

years. Then it finally got stolen. Got a used AB in 2012 for 1000$ which I could not be happier with. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Brian Morrison via CnC-List Sent: Thursday, Augus

Stus-List Morring available in Newport

Hi Burt, and any other local C&C transients, I’ll be away this coming weekend, and also entire week of august 18th. If anyone is interested in using my mooring let me know. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: Burt Stratton [mailt

cnc-list@cnc-list.com

around 450 lbs up and in. That re-build and install was a tough DIY job, but I couldn’t be happier. I plan to spend a week away this month but let me know what your plans are. You’re welcome to grab my mooring if I’m away. Petar Horvatic Sundowner 76 C&C 38MkII Newport

cnc-list@cnc-list.com

You never get back the money you put upgrading a used sailboat. That will never sell at that price. It’s a balsa cored production sailboat. Not a Hinckley or Alden. On the other hand, note to myself don’t look for used sailboats in the Bay area. Petar Horvatic Sundowner 76 C&a

Re: Stus-List Hot Water heater question

After how many hours of engine runtime is your hot water at 170F? From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Josh Muckley via CnC-List Sent: Tuesday, July 08, 2014 5:30 PM To: C&C List; Joel Aronson Subject: Re: Stus-List Hot Water heater question +1 to Jacks comment

Re: Stus-List Fw: Atomic 4

ector located directly under the carburetor and my blower was running whenever A4 was on. My sense of smell was also highly tuned to the smell of gasoline. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-lis

Re: Stus-List Isla Mujeras Regata al Sol

good, but signs of trouble are evident if oxidized aluminum pieces start falling out from the edge of the plate and through the hole where steering and electronics cable usually go. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-lis

Re: Stus-List CnC-List Digest, Isla Mujeras Regata al Sol

talling the new pedestal I used generous amounts of tefgel. In the last three years electrolysis seems to have stabilized. Good luck in a way back. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] O

Re: Stus-List source for transmission parts

Torrensen is a ripoff, but simple parts might not be as pricey. Foley Engines is a ripoff too. Transatlantic diesels is very reasonable. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of W

Stus-List Re-galvanizing chain

Anyone have an idea where to have chain re-galvanized in the New England? Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI ___ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com

Re: Stus-List Through-hull hole size

would be to just re-fill with 5200 to fill a void which is 40mils all around the grocco thrugh-hull. From: Chuck S [mailto:cscheaf...@comcast.net] Sent: Thursday, May 08, 2014 7:48 PM To: Petar Horvatic; CNC boat owners, cnc-list Subject: Re: Stus-List Through-hull hole size You

Stus-List Through-hull hole size

slightly larger than 1.9" or is the hole size too big and I need to grind out a hole to a 12:1 bevel, then glass it, fill with epoxy and drill a new hole? Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI ___ This List is provide

Re: Stus-List Adding cockpit drain on 38Mk2

quot; hole through transom opposite of engine exhaust hole, or drill 3/4" inlet through balsa, for watermaker intake and leave the current cockpit drains in tact. Hey Gery, thanks for the offer, how are things at Apponaug? Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI -Origina

Stus-List Adding cockpit drain on 38Mk2

Has anyone added cockpit drains through the transom or added new through-hulls. As you all know cockpit has only two drain holes. They were originally 1-1/4" on my '76 38mk2. Back in '04 I have enlarged them to 1-1/2" to help draining. I would like to use one of them for the watermaker inlet

Re: Stus-List Yanmar 2GM from C&C 32 available

Basically like the ones you already have for A4(if you have them). Shaft coupling can be had with vibration dampening. Engine will vibrate, especially at low RPMs, but not the hull. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun..

Re: Stus-List Yanmar 2GM from C&C 32 available

a good deal. Don't forget that panel will run you few hundred as well. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stevan Plavsa Sent: Wednesday, February 26, 2014 3:38 PM To: cnc-list@cnc

Re: Stus-List Atomic 4

I have everything but the head. I just sold my old head for a 100$ as well. Mine is mostly parted.He would need to put it together and purchase bearings, hone cylinders, magnaflux the journals on the crank, etc. phorv...@gmail.com Petar Horvatic Sundowner 76 C&C 38MkII New

Re: Stus-List Radar Cable Connector & other advice

runners. I used it only few times in 8 years but under the circumstances it was worth it. I am mostly coastal cruising now but, but with a toddler on board, I am thinking of adding the furler on the inner forestay to make things safer. Petar Horvatic Sundowner 76 C&C 38MkII

Re: Stus-List Adjustable genoa car system for C&C 38

Rick, thanks for the details, and thanks everyone. I am definitely going to talk to Guido. Rick are you referring to E-Z Glide on Garhauer website. Car 2 being $302.50 E-Z G-UB, and Car 3 being $363.00 E-Z G-3? Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI

Stus-List Adjustable genoa car system for C&C 38

/data/EZ%20Glide-500x500.jpg Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI ___ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com

Re: Stus-List single handing a C&C 38

tuning adjustments like Cunningham, genoa fairlead blocks, setting up preventer, etc. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI -Original Message- From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Rich Knowles Sent: Thursday, January 02, 2014 12:48 PM To:

Re: Stus-List re-heading rod rigging

sing an incompetent rigger. Petar Horvatic Sundowner 76 C&C 38MkII Newport, RI From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of David Folsom Sent: Wednesday, November 27, 2013 11:49 AM To: cnc-list@cnc-list.com Subject: Stus-List re-heading rod rigging

  1   2   >