I just did mine in December. I pressed it out first. Then took the measurement.
Petar Horvatic Sundowner 76 C&C 38MkII On the hard at Stanleys in barrington From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Paul Fountain via CnC-List Sent: Friday, February 12, 2016 2:28 PM To: cnc-list@cnc-list.com Cc: Paul Fountain Subject: Re: Stus-List Cutlass bearing size issue Brian, try sanding the ends of the bearing/strut so you can see the brass bearing sleeve and bronze strut, may help you get an accurate size. Paul Fountain Perception II 1985 C&C 33-II k/cb Port Credit Yacht Club From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Brian Fry via CnC-List Sent: Thursday, February 11, 2016 5:23 PM To: cnc-list@cnc-list.com Cc: Brian Fry <biker...@yahoo.com> Subject: Stus-List Cutlass bearing size issue Attempting to replace cutlass bearing. Shaft is 1.25" ID of the strut where the bearing goes is 1.625", which by my calculation is 1 and 5/8. I cannot find a bearing that is 1 1/4 X 1 5/8. Only 1 1/4 X 1 1/2 or 1 3/4 Cant find metric equivalent either. Brian Fry La Neige HdG MD 1993 37/40XL
_______________________________________________ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
