Go to the PAGING GROUP program. You assign what group you want your EXTERNAL
PAGE PORT to be assigned to. For example, you can make the external page Group
5. Then when you dial *3305, you will then access that group or the external
speakers.
Carmen
-Original Message-
From: Ross Lind
Sounds like you need to call Panasonic Tech support to walk through those
issues.
Carmen
-Original Message-
From: Ross Lindahl <[EMAIL PROTECTED]>
To: KXT Mailing list
Sent: Fri, 03 Jun 2005 07:12:28 -0700
Subject: KX-T: [Fwd: tda 50 and tvs 125]
Ladies and Gents
I am setting up a t
make sure you hit "reply all"
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
How far is 600 meters?
Carm
-Original Message-
From: N D <[EMAIL PROTECTED]>
To: kxt@kxthelp.com
Sent: Mon, 22 Aug 2005 22:38:37 -0700 (PDT)
Subject: KX-T: TDA Series DECT
Dear All,
What is the maximum area of coverage (Radius in Meters) that a TDA Series Cell
StationsKX-TDA0141CEKX
1-800-333-1422 and ask for Todd Wallace. Dont know about new, but good bet
they have refurbished. Really good people that stand behind their equipment. 1
year warranty.
Company called Com Sal.\
Carm
-Original Message-
From: Nick Miller <[EMAIL PROTECTED]>
To: kxt@kxthelp.com
Sent: Mo
?? There is a 16SLC card for the TD1232
-Original Message-
From: Support <[EMAIL PROTECTED]>
To: kxt@kxthelp.com
Sent: Fri, 9 Sep 2005 15:33:35 +0630
Subject: KX-T: KXTD-1232 with 16 SLC card installation.
Hi,
I am installing the 16 SLC card to the D1232 unit. Does the card s
Randy,
Somewhere in the 990 program, there is a section to define if a "flash"
provides and disconnect or an EFA to the central office. Sounds as though you
have disconnect activated and EFA needs to be turned on. Dont remember what
line, so you may need to do a search through the 990 program,
How about this. Have one of the analog extensions that rings with the door
phone come back into the system as a trunk port. Have that trunk port DIL to an
extension that is remote call forwarded to the cell phone. Just a thought!?
Carmen
-Original Message-
From: Michael Duffy <[EMAIL
It sometimes takes 3 to 4 rings before the call waiting beep comes through.
This has always been a problem with the call waiting cycle. I use to install a
small extension ringer in the XDP port to get around the call waiting delay.
Carmen
-Original Message-
From: Jason Zimberoff <[EMA
Yes, go into system options and program the DSS button to FLASH for incoming
calls.
Carmen
-Original Message-
From: [EMAIL PROTECTED]
To: kxt@kxthelp.com
Sent: Fri, 30 Dec 2005 19:17:40 EST
Subject: Re: KX-T: TDA BLF/DSS buttons
I replaced a KX-TD1232 with a TDA cabinet. The customer
Just a hunch, but the phone needs to be sent to PAnasonic Repair?
Carmen
-Original Message-
From: Gary Vodvarka <[EMAIL PROTECTED]>
To: kxt@kxthelp.com
Sent: Tue, 31 Jan 2006 12:06:45 -0800
Subject: KX-T: KX-TD7895 Cordless
I have a Need Repair 1 on the Display. Does anyone know what
Set up an analog extension as a trunk. Set that trunk to trunk service for CS
#7. Then when you transfer the call to that extension, it will come back as a
trunk to VM and go straight to CS 7.
Only way I can figure at this point. Bummer is you need an analog port.
Carmen
-Original Message-
Why would one think the software would be the same?
Different country. Had a TVS100 from Canada and had to send the harddrive to
Panasonic to make changes to work here. Different Country, most likely,
different software.
Carmen
-Original Message-
From: TECH <[EMAIL PROTECTED]>
To: Pan
Man, are we getting cynical in here!
Carmen
-Original Message-
From: Michael N. Marcus <[EMAIL PROTECTED]>
To: Joe Childs <[EMAIL PROTECTED]>
Cc: kxt@kxthelp.com
Sent: Fri, 07 Apr 2006 20:12:16 -0400
Subject: Re: KX-T: 7600 series
> Michael,
> It works fine except for the following i
Is phonelogger cheaper than Panalog?
Carmen
-Original Message-
From: Charles Patterson <[EMAIL PROTECTED]>
To: KXT Mailing list
Sent: Sat, 8 Apr 2006 12:22:32 -0400
Subject: Re: KX-T: Has anyone tried Phonelogger?
I've used it for a few clients, they're very happy especially if they
o
I was under the impression that the TD system would be supported with parts,
including phones, for the next 5 years. I have ordered new 7453 sets from
Teledynamics without problems, although only a few at a time.
Has anyone actually heard from their Panasonic rep that NO TD PARTS are being
prov
Sounds like I will stay with Panalog. Pretty cheap and works well.
Carmen
-Original Message-
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; kxt@kxthelp.com
Sent: Sat, 8 Apr 2006 14:52:33 US/Eastern
Subject: Re: KX-T: Has anyone tried Phonelogger?
> Is phonelogger c
I have never heard of this system. And what is a HBX? Hybrid Branch Exchange?
Was this the VA series?
-Original Message-
From: Rami Mardini <[EMAIL PROTECTED]>
To: kxt@kxthelp.com
Sent: Mon, 15 May 2006 10:40:41 +
Subject: KX-T: KX-T206HBX
Dears,,
Can any one Please help me f
That rock over yonder with the moss on top. See, that one right there.
-Original Message-
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; kxt@kxthelp.com
Sent: Tue, 16 May 2006 17:56:19 +1200
Subject: Re: Re: KX-T: KX-T206HBX
What rock did you crawl out of from un
I had this problem once with an Avaya Partner system. Called the local telco
and they said the line was a little too "Hot", because of the location to the
CO. They turned down the line and everything was fine.
Carmen
-Original Message-
From: Paul R Larsen <[EMAIL PROTECTED]>
To: KXT he
Honey,
Ya think! 2 x 6. Thats about it. Never heard of a KX-T206HBX model. But thanks
for clearing up that it is 2 CO Lines, not oulines by 6 station ports. Now I
can sleep.
Dear
-Original Message-
From: Rami Mardini <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]; kxt@kxthelp.com
Sent: Tue
About $8000 would be my estimate here. CPE on the rack and all patch panels as
I read it. I would just be providing the jack and cable material. I priced out
5e Plenum.
Carmen
-Original Message-
From: Larry <[EMAIL PROTECTED]>
To: kxt@kxthelp.com
Sent: Thu, 18 May 2006 04:42:53 -0500
I gave up programming through a phone years ago and refuse to go back. The
client would either have to upgrade or I would pass.
Carmen
-Original Message-
From: chris <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]; kxt@kxthelp.com
Sent: Thu, 18 May 2006 09:34:14 +0300
Subject: Re: KX-T: KX-T2
Really! I think 8 to 10k is a normal range of quotes. What would be a good
solid quote in your area?
Carmen
-Original Message-
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: kxt@kxthelp.com
Sent: Thu, 18 May 2006 10:18:28 EDT
Subject: Re: KX-T: cable only quote
Ok... they would fr
How would you all price each cable run when you are pulling 3 cables to each
location? Lets assume that the Patch Panel and the Voice Frame are within the
same room and close to each other. Would you still price it out at 120 to 180
per Run, or would you discount the cost based upon the labor pu
Ser,
I just curious, doesn't these eu systems come with any installation manuals at
all? That seems to be a basic question that the manual could quickly answer. On
our TDA systems we need to use the RS232 output for SMDR data. Not there on the
USB. At least that is what my manuals state. I never
It's been years since I had to reset a 308, but you have to get inside the box.
Once there, there are jumpers that need to be shorted and then power the system
down while holding a shot on the jumpers. You will need to find the actual
procedure somewhere on line. Try www.panasonichelp.com. I on
Take the line off the system and try using a standard telephone. When it does
not work, call back the provider and tell them you are using a standard
telephone and can not access this feature. Once they no longer have the pbx as
a scapegoat, they will now have to get off their lazy butts and fix
My opinion would be to go new TDA100 or 200 depending on the amount of old sets
you have. Repair would be expensive and not worth it, in my opinion. Also, the
client should look at the insurance policy. I had a client get a new system
with new phones, and it was all covered due to a power hit. B
Yes, 7433 phones wil work with proper power supply on the TDA.
Carmen
-Original Message-
From: haceva <[EMAIL PROTECTED]>
To: kxt@kxthelp.com
Sent: Mon, 5 Jun 2006 09:36:10 +0200 (CEST)
Subject: KX-T: KX-7433 phones
Hi
Our company has TD816 pbx with KX-7433 phones. We want to change
VTR will not work with "virtual" mailboxes. You need to have an extension
assigned to use the VTR button. Otnerwise you need to TRANSFER to 165 then dial
# 6 + the mailbox to get the caller into the correct box.
Carmen
-Original Message-
From: Rick McCoy <[EMAIL PROTECTED]>
To: kxt@kxt
You have the answer. Forward to a Phantom Extension and place that extension on
the group of phones that will cover. Since she already can forward to another
extension, the CO lines must be DIL to her ext. Now when she forwards to the
phantom, it will ring where ever the phantom is assigned.
CD
Make sure you have a 2 as a leading digit for an extension in the TVS200 setup.
If leading digit is just a 1, then the system will not wait for additional
digits.
Carmen
-Original Message-
From: [EMAIL PROTECTED]
To: kxt@kxthelp.com
Sent: Wed, 26 Jul 2006 7:21 PM
Subject: KX-T: TVS
Yes, use the EFA Transfer instead of the Trunk to trunk. You just need to have
the local service provider to enable Call Transfer" service onto the clients
lines. No db loss and none of the client lines are used, where as the trrunk to
trunk uses 2 lines per call.
Carmen
-Original Messa
I don't think it's the provider because the SL and XDP ports work. Try
pressing # then the digits and see if that makes a difference.
Carmen
-Original Message-
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: kxt@kxthelp.com
Sent: Wed, 16 Aug 2006 12:23 PM
Subject: Re: KX-T: Touch T
Just clear the alarm through UTILITIES. Whenever you power down the system,
the alarm light will come on. Just CLEAR the minor and major alarms and then
wait to see if it relights. It was probably just because the system was powered
down. No biggie.
Carmen
-Original Message-
From:
I dont believe you can do "Trunk" service on a 120. You may need a 125. But if
I am wrong, go to Auto Attd settings and be sure to activate "TRUNK" Service
and assign Trunk numbers 9 thru 12 to CS 2.
Carmen
-Original Message-
From: [EMAIL PROTECTED]
To: kxt@kxthelp.com
Sent: Wed, 4
you would think.
CD
-Original Message-
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: kxt@kxthelp.com
Sent: Sun, 12 Nov 2006 6:46 PM
Subject: Re: KX-T: Call waiting CID on kxta824
On 2006-11-11 at 12:08, John Pavlik ([EMAIL PROTECTED]) wrote:
> I read an earlier thread where ther
When they pick up the system phone, are they dialing 9 to access the outside
line or are they pressing the CO button first before lifting the handset?
Carmen
-Original Message-
From: [EMAIL PROTECTED]
To: kxt@kxthelp.com
Sent: Tue, 12 Dec 2006 2:13 AM
Subject: KX-T: KX-T123211D - VoIP
Thats a fix for the TREO's and the Blackberrys. Thats a problem with any VM
System. Not our problem but itis theirs.
Carmen
-Original Message-
From: [EMAIL PROTECTED]
To: kxt@kxthelp.com
Sent: Mon, 12 Feb 2007 1:21 PM
Subject: KX-T: Dialing names from TREO and Blackberry
Has anyone c
Thats pretty much how it works, especially with Caller ID enabled.
Carmen
-Original Message-
From: [EMAIL PROTECTED]
To: kxt@kxthelp.com
Sent: Mon, 23 Apr 2007 2:40 AM
Subject: KX-T: Can't get rid of TDA100 ICD Grp ring delay
I am programming my first TDA100 after attending the Panas
Go into the PORT/TRUNK service. Day mode and select down to delay answer time.
Need to set for each Service and Time mode.
Carmen
-Original Message-
From: [EMAIL PROTECTED]
To: kxt@kxthelp.com
Sent: Wed, 2 May 2007 11:48 AM
Subject: KX-T: KX-TVA50 on a KX-TA824, # of rings to answer..
Mike,
One way you can do this is to setup a mailbox for the group and in the
greeting, tell the caller that all operators are busy and to either press 0 to
continue holding for the next operator or to leave a message at the tone.
Then set Operator Coverage as the same extension as the group.
What is the ext number of the phone that you are using for the XDP. If the
phone ext is 101 than the xdp port is 201. If the jack number for the phone is
1-1 than the xdp is 1-2.
Better way is to DIL the CO 7 to the actual extension number of the XDP, which
should be a 2xx number.
Carmen
TVS. Old system. Is this something that just started after years of use??
Carmen A DeFelice
Panasonic Business Phone Systems
-Original Message-
From: Bob p...@nle
To: kxt@kxthelp.com
Sent: Sat, Dec 18, 2010 2:32 pm
Subject: KX-T: TVS-200 Dropping calls
Hi Gang,
I have a TV
When you download the software, it should ask you if you want to download the
drivers. Say yes and they will be loaded. I always create a Panasonic Driver
File and store them there. Without the drivers off the CD to your laptop, you
will not be able to connect.
Carmen A DeFelice
Panasonic
In the voicemail box setup, set ALL CALLS TRANSFER to mailbox ENABLED. This
will allow the auto attendant to transfer a caller to his mailbox. But you CAN
NOT do a Voicemail Transfer for a caller. You will need to TRANSFER to
Voicemail ext, then Dial POUND, 6 plus the mailbox number to transfer
program a few speed dial numbers in the TDA50 system. Then export that file.
That will show you EXACTLY how the fields need to be. Make the adjustments in
the old TD1232 file, then up load. One error will mess the entire load. So you
might want to do about 50 at a time.
Carmen A DeFelice
Pana
Need to go to Utility on menu bar. File Transfer PBX to PC. Click on the Dsys
file and select Transfer and save to a location on your PC.
Carmen A DeFelice
Panasonic Business Phone Systems
-Original Message-
From: John Challenor
To: Panasonic KX-T telephone system discussion
depends on what the carrier is send you 4 or 7 digits. Can go either way. On a
Pri you dial out on any of the 23 channels. To show the DID number to the
outgoing caller ID, you need to set CLIP for that extension and have the
carrier look for CLIP control from the PBX.
Carmen A DeFelice
P
Restrict the VM ports on the Phone System. Dont try to stop in the voicemail,
but the Ports of the PBX used for the voicemail should be restricted to local
dialing only.
Carmen A DeFelice
Panasonic Business Phone Systems
-Original Message-
From: Dominic Pageau
To: Panasonic K
You welcome.
Carmen A DeFelice
Panasonic Business Phone Systems
-Original Message-
From: Dominic Pageau
To: Panasonic KX-T telephone system discussion list
Sent: Mon, Sep 12, 2011 9:38 am
Subject: Re: KX-T: TVS200 how to prevent outbound call
I have assigned a specific COS t
Try a "blind transfer" from the Vm unit. Instead of FX make it FXD in the
transfer sequence.
Carmen A DeFelice
Panasonic Business Phone Systems
-Original Message-
From: Chad W. Davis
To: kxt
Sent: Thu, Oct 20, 2011 3:00 pm
Subject: KX-T: Caller ID
I am able to get caller I
All fax notification will do is automatically transfer the fax tone, the AA
hears, to the extension that is connected to your fax machine, so your fax can
receive that incoming call.
Carmen A DeFelice
Panasonic Business Phone Systems
www.newjerseytelephonesystems.com
-Original
In your CO to Co settings, your timer is defaulted to 10 min. You need to
increase that or remove it altogether.
Carmen A DeFelice
Panasonic Business Phone Systems
www.newjerseytelephonesystems.com
-Original Message-
From: Chad W. Davis
To: kxt
Sent: Thu, Sep 6, 2012 1:49 p
55 matches
Mail list logo
