Go to the PAGING GROUP program. You assign what group you want your EXTERNAL PAGE PORT to be assigned to. For example, you can make the external page Group 5. Then when you dial *3305, you will then access that group or the external speakers. Carmen -----Original Message----- From: Ross Lindahl <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Cc: kxt@kxthelp.com Sent: Tue, 31 May 2005 18:36:28 -0700 Subject: Re: KX-T: tda
Steve I know where the page port is. What I should have said was I do not know how to access the external page port through the system phones. Zone paging through the system is *3301 through *3316 for zones 1 to 16. The td systems you dialed 33* to all call which included the external page port. I was wondering what you dialed to get all the phones and the external page port on the tda systems. Some times the answer is right under your nose. Thank you for your help. Ross [EMAIL PROTECTED] wrote: > > >In a message dated 5/30/2005 11:12:47 PM Eastern Daylight Time, >[EMAIL PROTECTED] writes: > >External page port on the tda50 > > >1 page port only, 1/8" mini plug, and the level is now adjustable, -15db to >+15db/ per 1db step. It's located on the right hand side of the cabiner just >below the SD card and reset and memory buttons. > >Steve L. Martin >_Surf Side Sound, Inc._ (http://www.surfsidesound.com/) >_________________________________________________________________ >KX-T Mailing list --- http://kxthelp.com/ >Subscription changes: http://kxthelp.com/mailman/listinfo/kxt > > > _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
