usrp-users  

Messages by Thread

• • [USRP-users] Re: Ettus X310 - Streaming Data TO the SDR Marcus D. Leech
• [USRP-users] how to use multi_usrp to open multi b210 james Thomas
  • [USRP-users] Re: how to use multi_usrp to open multi b210 Marcus D. Leech
• [USRP-users] Re: Trying to run rfnoc blocks in example uhd folder dhpanchaai
• [USRP-users] Trying to run rfnoc blocks in example uhd folder dhpanchaai
  • [USRP-users] Re: Trying to run rfnoc blocks in example uhd folder Marcus D. Leech
• [USRP-users] Re: [ERROR] [DPDK] Could not find route to destination address 192.168.10.2 houshang . azizi
  • [USRP-users] Re: [ERROR] [DPDK] Could not find route to destination address 192.168.10.2 houshang . azizi
  • [USRP-users] Re: [ERROR] [DPDK] Could not find route to destination address 192.168.10.2 Marcus D. Leech
• [USRP-users] Re: UHD, DPDK compatibility question joerg.hofrichter--- via USRP-users
  • [USRP-users] Re: UHD, DPDK compatibility question Houshang
  • [USRP-users] Re: UHD, DPDK compatibility question joerg.hofrichter--- via USRP-users
  • [USRP-users] Re: UHD, DPDK compatibility question Houshang
• [USRP-users] USRP N210 Gain Issue Muhammad Anas
  • [USRP-users] Re: USRP N210 Gain Issue Marcus D. Leech
  • [USRP-users] Re: USRP N210 Gain Issue Muhammad Anas
  • [USRP-users] Re: USRP N210 Gain Issue Marcus D. Leech
• [USRP-users] UHD, DPDK compatibility question Houshang
• [USRP-users] Re: LED quickly turns back off X410 dhpanchaai
  • [USRP-users] Re: LED quickly turns back off X410 Marcus D. Leech
• [USRP-users] n310 | Error: failed receiving packet. RfnocError Houshang
  • [USRP-users] Re: n310 | Error: failed receiving packet. RfnocError Marcus D. Leech
  • [USRP-users] Re: n310 | Error: failed receiving packet. RfnocError Houshang
  • [USRP-users] Re: n310 | Error: failed receiving packet. RfnocError Marcus D. Leech
  • [USRP-users] Re: n310 | Error: failed receiving packet. RfnocError Houshang
  • [USRP-users] Re: n310 | Error: failed receiving packet. RfnocError Marcus D. Leech
  • [USRP-users] Re: n310 | Error: failed receiving packet. RfnocError Houshang
  • [USRP-users] Re: n310 | Error: failed receiving packet. RfnocError Marcus D. Leech
• [USRP-users] LED quickly turns back off X410 dhpanchaai
  • [USRP-users] Re: LED quickly turns back off X410 Marcus D. Leech
• [USRP-users] Module Not Found Error BİLGEM
  • [USRP-users] Re: Module Not Found Error Marcus D. Leech
  • [USRP-users] Re: Module Not Found Error Marcus D. Leech
• [USRP-users] Blocker issue with NI-2943R (=Ettus x310) PCIe connectivity seppo . j . rantala
  • [USRP-users] Re: Blocker issue with NI-2943R (=Ettus x310) PCIe connectivity Martin Braun
  • [USRP-users] Re: Blocker issue with NI-2943R (=Ettus x310) PCIe connectivity Marcus D. Leech
• [USRP-users] Re: Can only control 1 pin of x310 GPIO Will Haftel via USRP-users
  • [USRP-users] Re: Can only control 1 pin of x310 GPIO hui cj
  • [USRP-users] Re: Can only control 1 pin of x310 GPIO hui cj
  • [USRP-users] Re: Can only control 1 pin of x310 GPIO Martin Braun
• [USRP-users] starting radios in parallel jason
  • [USRP-users] Re: starting radios in parallel Marcus D. Leech
  • [USRP-users] Re: starting radios in parallel Martin Braun
• [USRP-users] B210 power and gain levels johnhigginsgis
  • [USRP-users] Re: B210 power and gain levels Marcus Müller
  • [USRP-users] Re: B210 power and gain levels Marcus D. Leech
• [USRP-users] Can only control 1 pin of x310 GPIO Will Haftel via USRP-users
  • [USRP-users] Re: Can only control 1 pin of x310 GPIO hui cj
• [USRP-users] USRP sink with GPIO Tim Vancauwenbergh
  • [USRP-users] Re: USRP sink with GPIO Marcus D. Leech
  • [USRP-users] Re: USRP sink with GPIO Tim Vancauwenbergh
• [USRP-users] Runtime error BİLGEM
  • [USRP-users] Re: Runtime error Marcus D. Leech
• [USRP-users] Real-world experience with X440 Eugene Grayver
  • [USRP-users] Re: Real-world experience with X440 Marcus D. Leech
  • [USRP-users] Re: Real-world experience with X440 Martin Braun
• [USRP-users] Benchmark module for over-the-air wireless communication Muneer Al-Zubi
  • [USRP-users] Re: Benchmark module for over-the-air wireless communication Martin Braun
• [USRP-users] Re: E810 and DPDK sunniegoldie
  • [USRP-users] Re: E810 and DPDK c1337rogers
• [USRP-users] Re: Signal Distortion and Phase Issues with USRP B210 Marcus Müller
  • [USRP-users] Re: Signal Distortion and Phase Issues with USRP B210 Marcus D. Leech
  • [USRP-users] Re: Signal Distortion and Phase Issues with USRP B210 Marcus D. Leech
  • [USRP-users] Re: Signal Distortion and Phase Issues with USRP B210 yibindeng66
  • [USRP-users] Re: Signal Distortion and Phase Issues with USRP B210 Marcus D. Leech
• [USRP-users] Re: RFNoC TX and RX not working simulataniously Martin Braun
  • [USRP-users] Re: RFNoC TX and RX not working simulataniously Nidhi Panda
  • [USRP-users] Re: RFNoC TX and RX not working simulataniously hui cj
• [USRP-users] Replay block use for continuously stream data. Nidhi Panda
  • [USRP-users] Re: Replay block use for continuously stream data. hui cj
• [USRP-users] Re: How do I mitigate LO signal in my transmission? Ron Economos via USRP-users
• [USRP-users] First 10 Samples From First Receive Always 0 Chris Wozny
  • [USRP-users] Re: First 10 Samples From First Receive Always 0 Marcus D. Leech
  • [USRP-users] Re: First 10 Samples From First Receive Always 0 Chris Wozny
  • [USRP-users] Re: First 10 Samples From First Receive Always 0 Marcus D. Leech
• [USRP-users] PS-USB usage on x440 Dario Pennisi
  • [USRP-users] Re: PS-USB usage on x440 Dario Pennisi
• [USRP-users] Asynchronous IO in RFNOC on x310 mgannet
  • [USRP-users] Re: Asynchronous IO in RFNOC on x310 Martin Braun
  • [USRP-users] Re: Asynchronous IO in RFNOC on x310 Mark Gannet
  • [USRP-users] Re: Asynchronous IO in RFNOC on x310 Martin Braun
  • [USRP-users] Re: Asynchronous IO in RFNOC on x310 Mark Gannet
  • [USRP-users] Re: Asynchronous IO in RFNOC on x310 Martin Braun
  • [USRP-users] Re: Asynchronous IO in RFNOC on x310 Mark Gannet
  • [USRP-users] Re: Asynchronous IO in RFNOC on x310 Martin Braun
• [USRP-users] Re: USRP X410 with fft_cp FPGA image rubenthill--- via USRP-users
  • [USRP-users] Re: USRP X410 with fft_cp FPGA image joerg.hofrichter--- via USRP-users
• [USRP-users] USRP X410 with fft_cp FPGA image rubenthill--- via USRP-users
• [USRP-users] x410 RFNOC Endpooint YAML Configuration Andrew D
  • [USRP-users] Re: x410 RFNOC Endpooint YAML Configuration Wade Fife
  • [USRP-users] Re: x410 RFNOC Endpooint YAML Configuration Andrew D
• [USRP-users] Re: Drop packets and sequence errors during X410 DPDK benchmark test dhpanchaai
  • [USRP-users] Re: Drop packets and sequence errors during X410 DPDK benchmark test Marcus D. Leech
  • [USRP-users] Re: Drop packets and sequence errors during X410 DPDK benchmark test dhpanchaai
  • [USRP-users] Re: Drop packets and sequence errors during X410 DPDK benchmark test dhpanchaai
  • [USRP-users] Re: Drop packets and sequence errors during X410 DPDK benchmark test Marcus D. Leech
  • [USRP-users] Re: Drop packets and sequence errors during X410 DPDK benchmark test Marcus D. Leech
• [USRP-users] Drop packets and sequence errors during X410 DPDK benchmark test dhpanchaai
  • [USRP-users] Re: Drop packets and sequence errors during X410 DPDK benchmark test Marcus D. Leech
• [USRP-users] Re: Error: RuntimeError: Failure to create rfnoc_graph on USRP N310 pigatoimdeafrancesco
  • [USRP-users] Re: Error: RuntimeError: Failure to create rfnoc_graph on USRP N310 Marcus D. Leech
  • [USRP-users] Re: Error: RuntimeError: Failure to create rfnoc_graph on USRP N310 Marcus D. Leech
  • [USRP-users] Re: Error: RuntimeError: Failure to create rfnoc_graph on USRP N310 pigatoimdeafrancesco
  • [USRP-users] Re: Error: RuntimeError: Failure to create rfnoc_graph on USRP N310 Marcus D. Leech
• [USRP-users] Re: RFNoC Replay module (DRAM to PC) rubenthill--- via USRP-users
  • [USRP-users] Re: RFNoC Replay module (DRAM to PC) hui cj
• [USRP-users] Using USRP X310 Front GPIO as SPI Interface (UHD Timed Commands) hui cj
  • [USRP-users] Re: Using USRP X310 Front GPIO as SPI Interface (UHD Timed Commands) Martin Braun
• [USRP-users] Error: RuntimeError: Failure to create rfnoc_graph on USRP N310 pigatoimdeafrancesco
  • [USRP-users] Re: Error: RuntimeError: Failure to create rfnoc_graph on USRP N310 Marcus D. Leech
• [USRP-users] UHD with DPDK minimum requirement Mehran Memarnejad
  • [USRP-users] Re: UHD with DPDK minimum requirement Marcus D. Leech
  • [USRP-users] Re: UHD with DPDK minimum requirement Martin Braun
• [USRP-users] Re: X310 - RfnocError: OpTimeout: Control operation timed out waiting for ACK c1337rogers
  • [USRP-users] Re: X310 - RfnocError: OpTimeout: Control operation timed out waiting for ACK Marcus D. Leech
  • [USRP-users] Re: X310 - RfnocError: OpTimeout: Control operation timed out waiting for ACK c1337rogers
  • [USRP-users] Re: X310 - RfnocError: OpTimeout: Control operation timed out waiting for ACK Martin Braun
• [USRP-users] Trouble connecting to an x300 Chad Spooner
  • [USRP-users] Re: Trouble connecting to an x300 Marcus D. Leech
  • [USRP-users] Re: Trouble connecting to an x300 Chad Spooner
• [USRP-users] X310 - RfnocError: OpTimeout: Control operation timed out waiting for ACK c1337rogers
  • [USRP-users] Re: X310 - RfnocError: OpTimeout: Control operation timed out waiting for ACK Marcus D. Leech
• [USRP-users] Re: Questions about start_of_burst and end_of_burst Martin Braun
• [USRP-users] Toggle GPIO above sample level Tim Vancauwenbergh
  • [USRP-users] Re: Toggle GPIO above sample level Martin Braun
• [USRP-users] Error on using split stream and FFT rfnoc block. Nidhi Panda
  • [USRP-users] Re: Error on using split stream and FFT rfnoc block. Wade Fife
  • [USRP-users] Re: Error on using split stream and FFT rfnoc block. Nidhi Panda
  • [USRP-users] Re: Error on using split stream and FFT rfnoc block. Nidhi Panda
• [USRP-users] Best way to transfer samples from DDR to a laptop using only 1Gbps cable hui cj
  • [USRP-users] Re: Best way to transfer samples from DDR to a laptop using only 1Gbps cable Martin Braun
• [USRP-users] Updating OOT module to UHD4.7 - Error During Initialisation cyberphox
  • [USRP-users] Re: Updating OOT module to UHD4.7 - Error During Initialisation Martin Braun
  • [USRP-users] Re: Updating OOT module to UHD4.7 - Error During Initialisation Martin Braun
  • [USRP-users] Re: Updating OOT module to UHD4.7 - Error During Initialisation cyberphox
• [USRP-users] Error on using RFNoC Digital Down convetor (DDC). Nidhi Panda
  • [USRP-users] Re: Error on using RFNoC Digital Down convetor (DDC). Martin Braun
• [USRP-users] ADC saturation problem in USRP X310 je . amghar
  • [USRP-users] Re: ADC saturation problem in USRP X310 Marcus D. Leech
  • [USRP-users] Re: ADC saturation problem in USRP X310 Patrice PAJUSCO
  • [USRP-users] Re: ADC saturation problem in USRP X310 Brian Padalino
  • [USRP-users] Re: ADC saturation problem in USRP X310 Marcus D. Leech
  • [USRP-users] Re: ADC saturation problem in USRP X310 Patrice PAJUSCO
  • [USRP-users] Re: ADC saturation problem in USRP X310 Martin Braun
• [USRP-users] Assistance with RFNoC Keep-One-In-N Block For Radiometer Application Ekin Su Sacin
  • [USRP-users] Re: Assistance with RFNoC Keep-One-In-N Block For Radiometer Application Marcus D. Leech
  • [USRP-users] Re: Assistance with RFNoC Keep-One-In-N Block For Radiometer Application Martin Braun
  • [USRP-users] Re: Assistance with RFNoC Keep-One-In-N Block For Radiometer Application Marcus D. Leech
• [USRP-users] Error on adding RFNoC BLOCK - FFT. Nidhi Panda
  • [USRP-users] Re: Error on adding RFNoC BLOCK - FFT. Wade Fife
  • [USRP-users] Fwd: Error on adding RFNoC BLOCK - FFT. Nidhi Panda
• [USRP-users] Adding RFNoC BLOCK with USRP X300 Nidhi Panda
  • [USRP-users] Re: Adding RFNoC BLOCK with USRP X300 Martin Braun
• [USRP-users] Migrating a Design from 3.0 to 4.0 steve . wakelam
  • [USRP-users] Re: Migrating a Design from 3.0 to 4.0 Martin Braun
• [USRP-users] EnvironmentError: IOError: recv error on socket Houshang
  • [USRP-users] Re: EnvironmentError: IOError: recv error on socket Houshang
  • [USRP-users] Re: EnvironmentError: IOError: recv error on socket Martin Braun
  • [USRP-users] Re: EnvironmentError: IOError: recv error on socket Houshang
• [USRP-users] Re: RFNOC e310 block yaml and bit image file examples mgarrett
  • [USRP-users] Re: RFNOC e310 block yaml and bit image file examples mgarrett
• [USRP-users] "buffer_double_mapped :warning: allocate_buffer:" for dvbt_rx_8k.grc h57jafari
  • [USRP-users] Re: "buffer_double_mapped :warning: allocate_buffer:" for dvbt_rx_8k.grc Marcus D. Leech
  • [USRP-users] Re: "buffer_double_mapped :warning: allocate_buffer:" for dvbt_rx_8k.grc Ron Economos via USRP-users
• [USRP-users] Antena selection with RFNoC Maria Muñoz
  • [USRP-users] Re: Antena selection with RFNoC Marcus D. Leech
• [USRP-users] RFNOC e310 block yaml and bit image file examples mgarrett
  • [USRP-users] Re: RFNOC e310 block yaml and bit image file examples Martin Braun
• [USRP-users] Re: Using 10GbE to stream receiver data to remote FPGA steve . wakelam
  • [USRP-users] Re: Using 10GbE to stream receiver data to remote FPGA Marcus D. Leech
  • [USRP-users] Re: Using 10GbE to stream receiver data to remote FPGA Martin Braun
  • [USRP-users] Re: Using 10GbE to stream receiver data to remote FPGA steve . wakelam
• [USRP-users] Using 10GbE to stream receiver data to remote FPGA steve . wakelam
  • [USRP-users] Re: Using 10GbE to stream receiver data to remote FPGA Marcus D. Leech
• [USRP-users] Re: Octoclock CDA-2990 produces no signals shapkiquarry
  • [USRP-users] Re: Octoclock CDA-2990 produces no signals Marcus D. Leech
• [USRP-users] Octoclock CDA-2990 produces no signals shapkiquarry
  • [USRP-users] Re: Octoclock CDA-2990 produces no signals Marcus D. Leech
• [USRP-users] RFNoC Replay module (DRAM to PC) hui cj
  • [USRP-users] Re: RFNoC Replay module (DRAM to PC) Wade Fife
  • [USRP-users] Re: RFNoC Replay module (DRAM to PC) Maximilian Matthé
  • [USRP-users] Re: RFNoC Replay module (DRAM to PC) hui cj
  • [USRP-users] Re: RFNoC Replay module (DRAM to PC) Martin Braun
  • [USRP-users] Re: RFNoC Replay module (DRAM to PC) Jorge Chen
  • [USRP-users] Re: RFNoC Replay module (DRAM to PC) Martin Braun
  • [USRP-users] Re: RFNoC Replay module (DRAM to PC) Jorge Chen
  • [USRP-users] Re: RFNoC Replay module (DRAM to PC) Martin Braun
• [USRP-users] Re: Triggering of Rx synchronously with Tx in RFNoC mruane--- via USRP-users
  • [USRP-users] Re: Triggering of Rx synchronously with Tx in RFNoC mruane--- via USRP-users
  • [USRP-users] Re: Triggering of Rx synchronously with Tx in RFNoC perper
  • [USRP-users] Re: Triggering of Rx synchronously with Tx in RFNoC perper
• [USRP-users] Ettus USRP X310 with Different Daughterboards Q W via USRP-users
  • [USRP-users] Re: Ettus USRP X310 with Different Daughterboards Marcus D. Leech
• [USRP-users] Re: KAS kirkstone build of ni-titanium-rev5 on x410 with Vitis-AI Library and DPU drivers: Mainline kernel incompatible with zocl DPU driver; possible to use linux-xlnx kernel and make titanium-related additions? perper
  • [USRP-users] Re: KAS kirkstone build of ni-titanium-rev5 on x410 with Vitis-AI Library and DPU drivers: Mainline kernel incompatible with zocl DPU driver; possible to use linux-xlnx kernel and make titanium-related additions? mruane--- via USRP-users
  • [USRP-users] Re: KAS kirkstone build of ni-titanium-rev5 on x410 with Vitis-AI Library and DPU drivers: Mainline kernel incompatible with zocl DPU driver; possible to use linux-xlnx kernel and make titanium-related additions? mruane--- via USRP-users
  • [USRP-users] Re: KAS kirkstone build of ni-titanium-rev5 on x410 with Vitis-AI Library and DPU drivers: Mainline kernel incompatible with zocl DPU driver; possible to use linux-xlnx kernel and make titanium-related additions? Marcus D. Leech
  • [USRP-users] Re: KAS kirkstone build of ni-titanium-rev5 on x410 with Vitis-AI Library and DPU drivers: Mainline kernel incompatible with zocl DPU driver; possible to use linux-xlnx kernel and make titanium-related additions? mruane--- via USRP-users
  • [USRP-users] Re: KAS kirkstone build of ni-titanium-rev5 on x410 with Vitis-AI Library and DPU drivers: Mainline kernel incompatible with zocl DPU driver; possible to use linux-xlnx kernel and make titanium-related additions? mruane--- via USRP-users
  • [USRP-users] Re: KAS kirkstone build of ni-titanium-rev5 on x410 with Vitis-AI Library and DPU drivers: Mainline kernel incompatible with zocl DPU driver; possible to use linux-xlnx kernel and make titanium-related additions? perper

• Earlier messages
• Later messages