When i removed rfnoc block in YML file USRP FPGA image, it is not released
resources for rfnoc block.My question is how can release some resource on
FPGA in USRP image with removing some extra RFNOC block like DUC or DCC.
Why remove rfnoc block on YML file don't have any effect on reducing FPGA
resource!!
Thanks in advance
# General parameters
# -----------------------------------------
schema: rfnoc_imagebuilder_args # Identifier for the schema used to
validate this file
copyright: 'Ettus Research, A National Instruments Brand' # Copyright
information used in file headers
license: 'SPDX-License-Identifier: LGPL-3.0-or-later' # License information
used in file headers
version: '1.0' # File version
rfnoc_version: '1.0' # RFNoC protocol version
chdr_width: 64 # Bit width of the CHDR bus for this image
device: 'x300'
default_target: 'X300_HG'
# A list of all stream endpoints in design
# ----------------------------------------
stream_endpoints:
ep0: # Stream endpoint name
ctrl: True # Endpoint passes control traffic
data: True # Endpoint passes data traffic
buff_size: 32768 # Ingress buffer size for data
ep1: # Stream endpoint name
ctrl: False # Endpoint passes control traffic
data: True # Endpoint passes data traffic
buff_size: 0 # Ingress buffer size for data
ep2: # Stream endpoint name
ctrl: False # Endpoint passes control traffic
data: True # Endpoint passes data traffic
buff_size: 32768 # Ingress buffer size for data
ep3: # Stream endpoint name
ctrl: False # Endpoint passes control traffic
data: True # Endpoint passes data traffic
buff_size: 0 # Ingress buffer size for data
ep4: # Stream endpoint name
ctrl: False # Endpoint passes control traffic
data: True # Endpoint passes data traffic
buff_size: 4096 # Ingress buffer size for data
ep5: # Stream endpoint name
ctrl: False # Endpoint passes control traffic
data: True # Endpoint passes data traffic
buff_size: 4096 # Ingress buffer size for data
# A list of all NoC blocks in design
# ----------------------------------
noc_blocks:
duc0: # NoC block name
block_desc: 'duc.yml' # Block device descriptor file
parameters:
NUM_PORTS: 1
ddc0:
block_desc: 'ddc.yml'
parameters:
NUM_PORTS: 2
radio0:
block_desc: 'radio_2x64.yml'
duc1:
block_desc: 'duc.yml'
parameters:
NUM_PORTS: 1
ddc1:# General parameters
# -----------------------------------------
schema: rfnoc_imagebuilder_args # Identifier for the schema used to
validate this file
copyright: 'Ettus Research, A National Instruments Brand' # Copyright
information used in file headers
license: 'SPDX-License-Identifier: LGPL-3.0-or-later' # License information
used in file headers
version: '1.0' # File version
rfnoc_version: '1.0' # RFNoC protocol version
chdr_width: 64 # Bit width of the CHDR bus for
this image
device: 'x300'
default_target: 'X300_HG'
# A list of all stream endpoints in design
# ----------------------------------------
stream_endpoints:
ep0: # Stream endpoint name
ctrl: True # Endpoint passes control traffic
data: True # Endpoint passes data traffic
buff_size: 32768 # Ingress buffer size for data
ep1: # Stream endpoint name
ctrl: False # Endpoint passes control traffic
data: True # Endpoint passes data traffic
buff_size: 0 # Ingress buffer size for data
ep2: # Stream endpoint name
ctrl: False # Endpoint passes control traffic
data: True # Endpoint passes data traffic
buff_size: 32768 # Ingress buffer size for data
ep3: # Stream endpoint name
ctrl: False # Endpoint passes control traffic
data: True # Endpoint passes data traffic
buff_size: 0 # Ingress buffer size for data
ep4: # Stream endpoint name
ctrl: False # Endpoint passes control traffic
data: True # Endpoint passes data traffic
buff_size: 4096 # Ingress buffer size for data
ep5: # Stream endpoint name
ctrl: False # Endpoint passes control traffic
data: True # Endpoint passes data traffic
buff_size: 4096 # Ingress buffer size for data
# A list of all NoC blocks in design
# ----------------------------------
noc_blocks:
duc0: # NoC block name
block_desc: 'duc.yml' # Block device descriptor file
parameters:
NUM_PORTS: 1
ddc0:
block_desc: 'ddc.yml'
parameters:
NUM_PORTS: 2
radio0:
block_desc: 'radio_2x64.yml'
duc1:
block_desc: 'duc.yml'
parameters:
NUM_PORTS: 1
ddc1:
block_desc: 'ddc.yml'
parameters:
NUM_PORTS: 2
radio1:
block_desc: 'radio_2x64.yml'
replay0:
block_desc: 'replay.yml'
parameters:
NUM_PORTS: 2
MEM_ADDR_W: 30
# A list of all static connections in design
# ------------------------------------------
# Format: A list of connection maps (list of key-value pairs) with the
following keys
# - srcblk = Source block to connect
# - srcport = Port on the source block to connect
# - dstblk = Destination block to connect
# - dstport = Port on the destination block to connect
connections:
# ep0 to radio0(0) - RFA TX
- { srcblk: ep0, srcport: out0, dstblk: duc0, dstport: in_0 }
- { srcblk: duc0, srcport: out_0, dstblk: radio0, dstport: in_0 }
# radio(0) to ep0 - RFA RX
- { srcblk: radio0, srcport: out_0, dstblk: ddc0, dstport: in_0 }
- { srcblk: ddc0, srcport: out_0, dstblk: ep0, dstport: in0 }
# radio0(1) to ep1 - RFA RX
- { srcblk: radio0, srcport: out_1, dstblk: ddc0, dstport: in_1 }
- { srcblk: ddc0, srcport: out_1, dstblk: ep1, dstport: in0 }
# ep2 to radio1(0) - RFA TX
- { srcblk: ep2, srcport: out0, dstblk: duc1, dstport: in_0 }
- { srcblk: duc1, srcport: out_0, dstblk: radio1, dstport: in_0 }
# radio1(0) to ep2 - RFA RX
- { srcblk: radio1, srcport: out_0, dstblk: ddc1, dstport: in_0 }
- { srcblk: ddc1, srcport: out_0, dstblk: ep2, dstport: in0 }
# radio0(1) to ep3 - RFA RX
- { srcblk: radio1, srcport: out_1, dstblk: ddc1, dstport: in_1 }
- { srcblk: ddc1, srcport: out_1, dstblk: ep3, dstport: in0 }
# ep4 to replay0(0)
- { srcblk: ep4, srcport: out0, dstblk: replay0, dstport: in_0 }
# replay0(0) to ep4
- { srcblk: replay0, srcport: out_0, dstblk: ep4, dstport: in0 }
# ep5 to replay0(1)
- { srcblk: ep5, srcport: out0, dstblk: replay0, dstport: in_1 }
# replay0(1) to ep5
- { srcblk: replay0, srcport: out_1, dstblk: ep5, dstport: in0 }
# BSP Connections
- { srcblk: radio0, srcport: ctrl_port, dstblk: _device_, dstport:
ctrlport_radio0 }
- { srcblk: radio1, srcport: ctrl_port, dstblk: _device_, dstport:
ctrlport_radio1 }
- { srcblk: replay0, srcport: axi_ram, dstblk: _device_, dstport: dram }
- { srcblk: _device_, srcport: x300_radio0, dstblk: radio0, dstport:
x300_radio }
- { srcblk: _device_, srcport: x300_radio1, dstblk: radio1, dstport:
x300_radio }
- { srcblk: _device_, srcport: time_keeper, dstblk: radio0, dstport:
time_keeper }
- { srcblk: _device_, srcport: time_keeper, dstblk: radio1, dstport:
time_keeper }
# A list of all clock domain connections in design
# ------------------------------------------
# Format: A list of connection maps (list of key-value pairs) with the
following keys
# - srcblk = Source block to connect (Always "_device"_)
# - srcport = Clock domain on the source block to connect
# - dstblk = Destination block to connect
# - dstport = Clock domain on the destination block to connect
clk_domains:
- { srcblk: _device_, srcport: radio, dstblk: radio0, dstport: radio }
- { srcblk: _device_, srcport: ce, dstblk: ddc0, dstport: ce }
- { srcblk: _device_, srcport: ce, dstblk: duc0, dstport: ce }
- { srcblk: _device_, srcport: radio, dstblk: radio1, dstport: radio }
- { srcblk: _device_, srcport: ce, dstblk: ddc1, dstport: ce }
- { srcblk: _device_, srcport: ce, dstblk: duc1, dstport: ce }
- { srcblk: _device_, srcport: dram, dstblk: replay0, dstport: mem }
block_desc: 'ddc.yml'
parameters:
NUM_PORTS: 2
radio1:
block_desc: 'radio_2x64.yml'
replay0:
block_desc: 'replay.yml'
parameters:
NUM_PORTS: 2
MEM_ADDR_W: 30
# A list of all static connections in design
# ------------------------------------------
# Format: A list of connection maps (list of key-value pairs) with the
following keys
# - srcblk = Source block to connect
# - srcport = Port on the source block to connect
# - dstblk = Destination block to connect
# - dstport = Port on the destination block to connect
connections:
# ep0 to radio0(0) - RFA TX
- { srcblk: ep0, srcport: out0, dstblk: duc0, dstport: in_0 }
- { srcblk: duc0, srcport: out_0, dstblk: radio0, dstport: in_0 }
# radio(0) to ep0 - RFA RX
- { srcblk: radio0, srcport: out_0, dstblk: ddc0, dstport: in_0 }
- { srcblk: ddc0, srcport: out_0, dstblk: ep0, dstport: in0 }
# radio0(1) to ep1 - RFA RX
- { srcblk: radio0, srcport: out_1, dstblk: ddc0, dstport: in_1 }
- { srcblk: ddc0, srcport: out_1, dstblk: ep1, dstport: in0 }
# ep2 to radio1(0) - RFA TX
- { srcblk: ep2, srcport: out0, dstblk: duc1, dstport: in_0 }
- { srcblk: duc1, srcport: out_0, dstblk: radio1, dstport: in_0 }
# radio1(0) to ep2 - RFA RX
- { srcblk: radio1, srcport: out_0, dstblk: ddc1, dstport: in_0 }
- { srcblk: ddc1, srcport: out_0, dstblk: ep2, dstport: in0 }
# radio0(1) to ep3 - RFA RX
- { srcblk: radio1, srcport: out_1, dstblk: ddc1, dstport: in_1 }
- { srcblk: ddc1, srcport: out_1, dstblk: ep3, dstport: in0 }
# ep4 to replay0(0)
- { srcblk: ep4, srcport: out0, dstblk: replay0, dstport: in_0 }
# replay0(0) to ep4
- { srcblk: replay0, srcport: out_0, dstblk: ep4, dstport: in0 }
# ep5 to replay0(1)
- { srcblk: ep5, srcport: out0, dstblk: replay0, dstport: in_1 }
# replay0(1) to ep5
- { srcblk: replay0, srcport: out_1, dstblk: ep5, dstport: in0 }
# BSP Connections
- { srcblk: radio0, srcport: ctrl_port, dstblk: _device_, dstport:
ctrlport_radio0 }
- { srcblk: radio1, srcport: ctrl_port, dstblk: _device_, dstport:
ctrlport_radio1 }
- { srcblk: replay0, srcport: axi_ram, dstblk: _device_, dstport: dram }
- { srcblk: _device_, srcport: x300_radio0, dstblk: radio0, dstport:
x300_radio }
- { srcblk: _device_, srcport: x300_radio1, dstblk: radio1, dstport:
x300_radio }
- { srcblk: _device_, srcport: time_keeper, dstblk: radio0, dstport:
time_keeper }
- { srcblk: _device_, srcport: time_keeper, dstblk: radio1, dstport:
time_keeper }
# A list of all clock domain connections in design
# ------------------------------------------
# Format: A list of connection maps (list of key-value pairs) with the
following keys
# - srcblk = Source block to connect (Always "_device"_)
# - srcport = Clock domain on the source block to connect
# - dstblk = Destination block to connect
# - dstport = Clock domain on the destination block to connect
clk_domains:
- { srcblk: _device_, srcport: radio, dstblk: radio0, dstport: radio }
- { srcblk: _device_, srcport: ce, dstblk: ddc0, dstport: ce }
- { srcblk: _device_, srcport: ce, dstblk: duc0, dstport: ce }
- { srcblk: _device_, srcport: radio, dstblk: radio1, dstport: radio }
- { srcblk: _device_, srcport: ce, dstblk: ddc1, dstport: ce }
- { srcblk: _device_, srcport: ce, dstblk: duc1, dstport: ce }
- { srcblk: _device_, srcport: dram, dstblk: replay0, dstport: mem }
_______________________________________________
USRP-users mailing list -- usrp-users@lists.ettus.com
To unsubscribe send an email to usrp-users-le...@lists.ettus.com
