Hi everyone
It seems the programming software on the main page is out of date. Does anyone have a
newer one? I need to be able to program KX-TD308s as well D816s.
Thanx
multipart/alternative
text/plain (text body -- kept)
text/html
___
[EMAIL PROTECTED]
Thanx
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
This unit is two large gel batteries and a simple charger with an inline fuse. For
the Panasonic cost you are probably better off getting a good UPS, particularly if you
need to backup other equipment. Otherwise you can make your own quite easily and it
can then be made to order. This would a
rt the system, so that the
changes have affect.
Chris
- Original Message -
From: "SAM ." <[EMAIL PROTECTED]>
To:
Sent: Wednesday, January 04, 2006 12:56 PM
Subject: KX-T: config co isdn and analog
> Hi!.
> I have a kx-td1232sp with 3 extension packs, 2 for 8 ex
, sub
and gateway that is given to you.
Chris
- Original Message -
From: "Seraphin nzima" <[EMAIL PROTECTED]>
To:
Sent: Thursday, February 02, 2006 9:20 PM
Subject: KX-T: TDA200: IP CARD?
> Hello!
> please, i'd like to understand the use of IP card in
> T
o CO. There can only be
one stage of Call Forwarding.
So I suggest you to use another trunk group for CO 5, and use as intercept
for this trunk group one extension that it has fwd to CO enable.
Chris
_
KX-T Mailing list --- htt
Try [452], [453] and set the port to MSN, then add the numbers in [447] you
can set the ring for each number at [448], [449]. note that you need to
restart the system
Chris
- Original Message -
From: "tomaz" <[EMAIL PROTECTED]>
To:
Sent: Sunday, March 19, 2006 8:49
You have to tell us exactly what you have in [109]. For 16 SLT you need to
put A1 or A2 depending if there is another card already connected in the
system. Remember also that you can connect 2 extension cards in the system
not 3. The third self is used for CO expansion card.
- Original Messa
You can program the 206 through 21 ext. with dtmf tones.
pass 6206206# enter programming
6206# exit
-speed #00 [AA]tel number
AA: 00-79
-pulse - tone #01[A][B]
[A]:1-6
[B]: 0:pulse 1:tone
-out CO1 #02[A][B]
-out CO2 #03[A][B]
-in CO1 #04[A][B]
-in CO2 #05[A][B]
-doorphone#06[A][B]
[A]:1-6
[B]:0: n
put the CO and VoIP channels to the same trunk
group. How I am going to fix local access and ARS?
Thank you for your time.
Chris
Genius Systems L.T.D.
Athens, Greece
www.genius.gr
_
KX-T Mailing list --- http://k
the subslot, that you
have the DISA card) then give a gain from 00 to 09 for ports 1-4 (ch of
DISA). Or you can write messages (from studio) through ext music and give
more volume at playback.
Chris
Genius Systems L.T.D.
Athens Greece
- Original Message -
From: "Julio Prieto&quo
Yes... The normal MW lights on the phones work
perfectly... just the programmed buttons dont.
Any help is greatly appreciated...
--- Charles Patterson <[EMAIL PROTECTED]>
wrote:
> Chris,
>
> I think I've had that happen but I can't remember
> how we solved it
Hi Joel...
Thanks for the response, but the mbx numbers do exist
to real stations. Those light work fine, its just the
programmed buttons that dont... Like I said though,
thanks for the response. I would try anything right
about now..
--- JOEL WEISER <[EMAIL PROTECTED]> wrote:
>
Hi Joel...
Thanks for the response, but the mbx numbers do exist
to real stations. Those light work fine, its just the
programmed buttons that dont... Like I said though,
thanks for the response. I would try anything right
about now..
--- JOEL WEISER <[EMAIL PROTECTED]> wrote:
>
Hello all
Is it possible to have different ARS route schedules by a per extension or extension
group? Or it is everything or nothing?
Also... Has anyone here every connected 3 or more panasonic systems together via TIE
lines?
Thanks
Chris
-
Do You Yahoo
gramator is
>> > > P051l50130A.
>> > >
>>
>>
>> __
>> Do You Yahoo!?
>> Yahoo! Movies - coverage of the 74th Academy Awards®
>> http://movies.yahoo.com/
>>
>> _
arcus
>AbleComm, Inc.
>www.ablecomm.com etc.
>
>
>
>_
>KX-T Mailing list --- http://kxthelp.com/
>Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
Chris
San Luis Obispo CA Weather
I did it on a test basis, but never the less, I did do it. Anything in particular
you need to know?
Michael Duffy <[EMAIL PROTECTED]> wrote:
Dear Kxtd
I have a customer interested in a KXTD1232E full primary connected PRI 30
and all extensions connected 32.The system is for use in a call
I'd like to program a DSS button to perform a speed dial from the system
speed dial list.
If I program the button to *000, for example, when I press the DSS button
"Not Valid" is displayed.
Any ideas? Thanks, Chris.
___
the menu?
Second. On the AA, is it possible to have an option to transfer to extention (191)
and if nobody answers the call, have it go to another custome menu instead of it just
saying "Sorry... No one is available.."
Thanks in Advance..
Chris
--
Simple question, but different answers...
Does the KX-T185 DID unit support 2-way DID?
Does anyone know this for sure and not a guess?
Thanks
-
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
multipart/alternative
text/plain (text body --
install...
"Phonejack.com" <[EMAIL PROTECTED]> wrote: Yes, it will support 2 way DID.
DTMF is passed to the CO.
Now, which carrier offers 2 way DID?
Randy
- Original Message -----
From: "Chris Kovacik"
To:
Sent: Tuesday, May 28, 2002 12:01 PM
Subject: KX-T:
It's called "Off Hook Monitor" Program [148].
Chris.
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> David Lesher
> Sent: Tuesday, May 28, 2002 20:01
> To: KXT Mailing list
> Subject: KX-T: Speaker-only mode
>
correction, has been discontinued. Tried to get one yesterday... Out of stock and
no more...
Phil Barrett <[EMAIL PROTECTED]> wrote: welcome to panasonic, 1970's technology for
the 21st century!
nope, you are stuck with CID to a SINGLE analog line. and, yes, you need
the 171 which I belie
Sound,
> Inc.
>
>
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> _
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp
g.
>
> Paul Gusciora
> San Rafael, CA
>
> (Chemical Engineer, Control Systems person, and amateur radio
> wannabe)
>
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED], [EMAIL PROTECTED]
> Subject: Re: KX-T: Humming sound on KX-TA624
> From: chris Snyder <[EMAIL
Hello all...
I have a kx-td1232-5 and a new kx-tvs120. The 1232
has been in service for a while with a tvs-110 working
perfectly. I am upgrading to a tvs-120 for the
additional two ports. My problem is I can dial 165 to
access vm without any problems. I have my no answer
transfer for trunk 1
ust, but I can't say for sure. Can anyone give me
> some
> insight?
>
> Thanks
> Tim
>
---
Chris Snyder
Advantage Telcom
Cosby, Tn.
Sevier County's oldest interconnect.
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
use this program?
> i need more information
> thanks
> victor becerra
Chris Snyder
Advantage Telcom
Cosby, Tn.
Sevier County's oldest interconnect.
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet acc
: 8/2/2002
>
>
> _____
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
>
>
>
> multipart/mixed
> text/plain (text body -- kept)
> applicatio
> > KX-T Mailing list --- http://kxthelp.com/
> > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
> >
>
>
>
> _
> KX-T Mailing list --- http://kxthelp.c
00 "Victor Becerra"
<[EMAIL PROTECTED]> writes:
> program (416) for kx-td816 or 1232
> reverse circuit assigment
> i need to use this feature
> thanks
> victor
>
>
>
> >From: chris Snyder <[EMAIL PROTECTED]>
> >To: [EMAIL PROTECTED]
> >CC
>Thank You,
> >
> >John Berry, Owner
> >Lantex Voice & Data Systems
> >6093 Horton Dr
> >La Mesa, Ca 91942
> >phone 619-690-4428
> >fax 619-741-6823
> >[EMAIL PROTECTED]
> >
> >-Original Message-
> >From: chris Snyder
t
> Total Home Entertainment
> 3501 I-35E
> Waxahachie, TX 75165
> (972)938-1615 office
> (214)893-3471 cell
> (972)935-0539 fax
>
> X
>
>
> _____
> KX-T Mailing list --- http://kxthelp.com/
, Inc.
> www.ablecomm.com etc.
>
>
>
>
> _____
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
>
>
Chris Snyder
Advantage Telcom
Cosby, Tn.
Sev
via there is no pana center for certification?
>
> Where else should I get info for doing this?
>
> Is there any KX-500 cert also?
>
> Thank you
>
> Javier Galvez
> La Paz, Bolivia
> South America
> +(591)-715-22149
> [EMAIL PROTECTED]
>
>
> __
g you open up phone or DSS will
void the warenty, on that item.
I suspect that the DSS will not provide what you neet when the station
is paged.
However good luck with your problem.
On Mon, 09 Sep 2002 14:47:01 -0400 "L. M. Rappaport" <[EMAIL PROTECTED]>
writes:
> Chris,
&g
obably will), cause voltage changes on internal
> components and actual damage to the motherboard and power supply. You
void any
> warranty with Panasonic by using this software.
>
Chris Snyder
Advantage Telcom
Cosby, Tn.
Sevier County's oldest interconnect.
multipart/alternativ
> don¹t have
> that option. How can I fix this problem?
> Does any body know what exactly is happening in this case?
>
>
Chris Snyder
Advantage Telcom
Cosby, Tn.
Sevier County's oldest interconnect.
GET
around
> then
> | and I remember going to Partner school in the middle 80's ( I
> retired in
> 90 )
> |
> | Don Ritchie - K8ZGW - CENTURY COMMUNICATIONS - Euclid OH
>
>
>
> _
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://
...20915-1433
>
> _____
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
>
>
Chris Snyder
Advantage Telcom
Cosby, Tn.
Sevier County'
.)
Chris Snyder
Advantage Telcom
Cosby, Tn.
Sevier County's oldest interconnect.
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.jun
Any one here heard of a company called Inncom Telephone that installed
panasonic KX-T 616 and 1232 systems in motels? They had gypsy installers
that travled arround installing them. As far as I can tell their out of
busness.
If their still arround I would like their phone #.
thanks
Chris
and don't let OSHA see it!
>
> > I think knife
> > switches aren't even legal to own now.
>
> They're legal to own, but don't try taking one on an airplane!
>
Chris Snyder
Advantage Telcom
Co
e
> text/plain (text body -- kept)
> text/html
> _
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
>
>
Chris Snyder
Advantage Telcom
Cosby, Tn.
Sevier County's oldest interco
I also found out they were in Iowa
On Mon, 30 Sep 2002 07:26:38 -0400 chris Snyder
<[EMAIL PROTECTED]> writes:
> No this company is/was INNCOM.
>
> On Sun, 29 Sep 2002 21:03:37 EDT [EMAIL PROTECTED] writes:
> > There is still and Inacom in our area, but then as usual, t
FWD/DND
11 - Red Flashing/Red On
10 - Red On/Red On
01 - Red On/Red Flashing
00 - Red Flashing/Red Flashing
Area 9 Bits 4,3
--- Brian Mitchell <[EMAIL PROTECTED]> wrote:
> We just upgraded our -nothing TD1232 to a -6. I only
> received the -3 addendum to the programming
> documentation. What i
Is this an option for the kx-td1232-5? This is
something that I would have a need for...
Thanks
--- Dan Padilla <[EMAIL PROTECTED]> wrote:
> o.k.- looks like program 112 is the fix, I guess
> I've been installing
> ksu's abnormally since I have never had this happen
> on any analog or
> digita
___
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
>
>
Chris Snyder
Advantage Telcom
Cosby, Tn.
Sevier County's oldest interconnect.
G
end?
>
> Thanks,
> -Tim
>
>
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> _
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp.com/mail
; > Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
> >
> >
>
>
> _
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
>
>
After talking with the tech support folks @ Lantronix the solution is to tie
CD (Pin 8 on the UDS) to CTS (Pin 5 on the PBX). CD goes high whenever a
TCP connection is active.
Hopefully this will help with the other device servers out there.
Chris.
-Original Message-
From: [EMAIL PROT
Sorry folks.. re-reading my earlier post I was too subtle ;)
The Lantronix UDS-10 works. Period.
Just connect Pin 8 on the UDS (CD) to Pin 5 on the PBX (CTS).
That's it; no fussing.. no software hacks...
Chris.
-Original Message-
From: [EMAIL PROTECTED] [mailto:kxt-
solution was to define the port that the Multitech was
sitting on as a voice mail integration port; then to define the DTMF
sequence that should be sent to the VOIP gateway when the PBX saw a call
terminate. Match that with the Gateway's setting and all worked perfectly.
Chris.
Keith Morse
Panasonic just needs to rethink the method of how they use park. Many phones systems
have a park button. when you are talking with someone, you just press the park
button, and the display phone will say "call parked on ??". Panasonic should make it
so it automatically picks a park place...
difficult to explain to people when they have been
> using a
> standard 2-line phone, then want to plug it into a KXT and think
> they should
> be able to press line 1 for co1 and line 2 co2... or they press the
> hold
> button but can't pick up the call on a system phone
01) 56-LINUX
> Unless the host (that isn't close).pob 1433
> is busy, hung or dead20915-1433
>
> _
> KX-T Mailing list --- http://kxthelp.com/
> Subscript
Telecom Systems, Inc.
> [EMAIL PROTECTED]
> 305-235-3603 Voice
> Harry Solorzano
> www.select-telecom.com
>
>
>
> _
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp.c
;
>
> _
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
>
>
Chris Snyder
Advantage Telcom
Cosby, Tn.
Sevier County's oldest interconnect.
sonic is so damn proprietary about their interfaces.
> Still, they do have an RS232 interface...
>
> --
> Larry
> [EMAIL PROTECTED]
>
> _____
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
>
>
Chris Snyder
A
I'm trying to track down a company that does work for the Target retail
chain, called Teledata Corp.
I did a web search but none of the hits I found seemed to be the company
I'm looking for.
any help is appricated
Chris Snyder
Advantage Telcom
Cosby, Tn.
Sevier County's olde
My thanks to all that responded I found the right company.
On Thu, 26 Jun 2003 22:33:12 -0400 chris Snyder
<[EMAIL PROTECTED]> writes:
> I'm trying to track down a company that does work for the Target
> retail chain, called Teledata Corp.
> I did a web search but none
My thanks to all that responded I found the right company.
On Thu, 26 Jun 2003 22:33:12 -0400 chris Snyder
<[EMAIL PROTECTED]> writes:
> I'm trying to track down a company that does work for the Target
> retail chain, called Teledata Corp.
> I did a web search but none
t;
> _
> > KX-T Mailing list --- http://kxthelp.com/
> > Subscription changes:
> http://kxthelp.com/mailman/listinfo/kxt
>
>
> __
> Do you Yahoo!?
> SBC Yahoo! DSL - Now
_
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
>
>
Chris Snyder
Advantage Telcom
Cosby, Tn.
Sevier County's oldest interconnect.
The best
Hi,
Does anyone have suggestions on how to make an unused KX-TD816 CO Port
"ring" for 15 seconds when a simple door bell button is pushed?
Thanks,
Chris.
_
KX-T Mailing list --- http://kxthelp.com/
Subscription cha
I know a TVS100 will as I have one of those. I am pretty sure the tvp is the same
thing just a different model number for Europe..
Don Ritchie <[EMAIL PROTECTED]> wrote:I have a 1232-1, will I have any trouble
interfacing to a voice mail system?
VoiceGate Wizard ?
Will TXTVP100E do a notify to
gt; in
> length from about 90' to the garage to about 30' to the mudroom. I
> have
> checked for shorts and opens on these lines and they look ok.
>
> Kim
>
>
>
> _
Chris Snyder
Advantage Telc
> _
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
>
>
Chris Snyder
Advantage Telcom
Cosby, Tn.
Sevier County's oldest interconnect.
a closed loop
> you
> don't need a Viking lobby box or station dialer or a phone line.
>
> Of course you have to sell the customer on having a phone, a button
> and a
> buzzer to replace the intercom they now have :-)
>
> Carl Navarro
>
>
>
>
>
essage-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf
> Of
> chris Snyder
> Sent: Friday, November 28, 2003 3:08 PM
> To: [EMAIL PROTECTED]
> Subject: KX-T: 1232D and TVS 100 problem
>
>
> I have a client with a 1232D and a TVS 100 VM system. The system
>
; > It seems to work for me.
> >
> >
>
>
> _
> KX-T Mailing list --- http://kxthelp.com/
> Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
>
>
Chris Snyder
Advantage Telc
age is simply flipping the 48v back and forth in
> polarity at 25hz, so it's a little
> weak, but it works. Pretty neat, when you realize they are
> switching this up from the 5v power supply.
>
> Bob
>
> chris Snyder wrote:
> > A diode bridged with a
How about a little more detail? What are you using for the MOH source.
If you are using a radio/stereo/whatever's headphone jack, you likely
have an impedance mismatch between that output and the line level input
on the 624.
Try using a dubbing cable from Radio Shack. Dubbing cables aren't simp
Or ask Google. Google does conversions.
Enter "600 meters in feet" (minus the "" "") in the searchbox, and
Google returns
*600 meters = 1 968.50394 feet*
Michael N. Marcus wrote:
>- Original Message -
>From: <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>;
>Sent: Tuesday, August 23, 200
Rats. None for the KX-T123211D...
Joe Childs wrote:
>I'm bored.
>
>http://www.austintele.com/disa.html
>
>Can you tell? :)
>
>-Joe
>
>_
>KX-T Mailing list --- http://kxthelp.com/
>Subscription changes: http://kxthelp.com/mailman/lis
A data point... The 7130 next to my recliner has a low buzz on any line
anytime the CF floor lamp plugged in next to it is lit. No buzz when
it's off.
larry wrote:
>check for crt monitor or fluorescent desk lamp getting into the phone or
>handset cord. also if there is a plantronics headset a
And, you'll need a serial line printer, which is fairly rare these days.
I used an old (OLD) Epson MX80 dot matrix printer with a parallel to
serial converter for a while. Now I have mine connected to a serial port
on my PC, and look at the output in Hyperterminal. The PC also runs my
weather s
phone also
faulty elsewhere.
Anyone found a cure for this? A way of fixing the phone?
Once I fooled around with the phones programming, accessed with the Set
- Program switch, and it came right. But the fault returned later and I
dont recall what I did. May have been coincidence.
Thanks
have
some open ports. :-) )
Thanks,
Chris
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
Can the KX-T824 be made to forward a call off-site on busy/no-answer on
an extension?
The scenario is a caller calls in, the autoattendant answers and routes
the call to my extension. If I don't answer or my extension is busy, I'd
like it to flash the CO line and forward the call to my cell pho
I have him by 3 days...
>From owner-kxt Fri Sep 13 12:54:05 1996 remote from denwa
Return-Path:
Received: by denwa.info.com (Smail3.1.29.1 #4)
id m0v1eIh-0001nNa; Fri, 13 Sep 96 12:53 PDT
Sender: [EMAIL PROTECTED]
Date: Fri, 13 Sep 1996 12:49:26 -0700 (PDT)
From: Chris Arndt <
know email existed that long ago :-)
>
>
>
>Michael Karaman
>President
>
>
>
>-Original Message-
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of
>Chris Arndt
>Sent: Thursday, May 25, 2006 3:57 PM
>To: KXT Mailing list
>Subject: Re: K
There's been some talk here about VOIP in various incarnations and
Panasonic switches. I thought I'd post our recent experiences with
integrating Skype. www.skype.com
Skype is, at it's heart, a PC to PC phone service not unlike some of the
IM voice calling services. But it's also more than that
Babelfish says he says:
Greetings to all the members of the List. I finish buying for my company
a telephone Slate Panasonic KX - TEM824, and desire to know where I can
find softwares additional to interact with her. Very been thankful from
already,
Empresa Hilandería wrote:
>Saludos a todos
What's the baud rate of the 5v data? At the switch, convert it to rs232,
plug it into something like a GridConnect Net232
http://www.gridconnect.com/net232.html serial to ethernet adapter.
Do the same at the other end, in reverse, plus add power back onto the
data for the phone. Run a parallel
Hmmm. Is there a similar code for the 1232-11D?
Thanks!
Chris
Larry wrote:
>dialing 35 on the intercom at the receptionist will toggle bgm on and
>off, on the external paging speakers.
>
>receptionist picked up phone (icm) and started dialing a phone number
>like 350-?
already stream it over the net so I can hear it at work.
Gee, I wonder if I can dial the paging zone and then put it on hold. :-)
Thanks
Chris
Larry wrote:
>Hi Chris,
>it's not in the manual or addendum 3
>press 1 toggles set speaker bgm, like the d8/12.
>
>-larry
Take the bells out of some old mechanical external ringers and then
mount the assembly securely to the underside of everyone's chair and
wire them to the CO lines as previously noted. That way they'll know
it's going to audibly ring before it does...
>There are some sick individuals on this boa
OK, I've RTFM and looked at the TVA Maintenance Console screens until
I'm crosseyed. I'm sure this is an easy parameter to find, but I'm not
seeing it/getting.
Where is the setting for # of rings or number of seconds before the
TVA50 answers an incoming CO l
creens until
>I'm crosseyed. I'm sure this is an easy parameter to find, but I'm not
>seeing it/getting.
>
>Where is the setting for # of rings or number of seconds before the
>TVA50 answers an incoming CO line?
>
>Thanks!
>
>Chris
>
>_
Carl Navarro wrote:
>They tell me that Dell made Microsloth unhappy for offering XP and
>Linux (Ubuntu?) on new machines. Geeze, I hope Dell, or anybody,
>crushes M$. I'd like to but I can't.
>
>
>
Dunno about Linux, but our Dell rep (we resell Dells) told me back when
Vista came out that
We have a half dead KX-TVA50. It has no audio, but answers its ports
appropriately when called directly or via a CO line.
Shutdown/reset and straight reset seem to have no effect.
It hangs in the middle of backing up.
Any ideas?
Thanks,
Chris
I can't connect to it, via USB or Ethernet. In either case, it tries and
then throws a Can't Read Administration Table error. The unit has been
reset several times.
Does anyone have any ideas?
Thanks!
Chris
_
KX-T Ma
Shawn, Charles, and Al nailed it.
I was using an older version of the software that was already installed
on my computer, rather than the one that came in the box.
Duh.
The CDs are labeled identically, as far as I can see. Just the file
dates are different..
Thanks for the help!
Chris
GridConnect Net232s will let you make a virtual serial connection over
Ethernet or the Internet.
http://www.gridconnect.com/net232.html
If you want to use them on the Internet, you'll need the ability to
port-forward port 10001 through the routers on each end, and static IPs
on each end. (Or a wa
Our TVA50 is acting strange. It's connected to a KX-TA824 with 6 CO lines.
In rotation, one after the other, one VM port will access CO6, dial a 0
and hang up. Then the other VM port will access CO5 and presumably do
the same thing.
How I know that... I have a flex button on my 7736 for ext 107
Thanks Larry. That appears to be the problem. MB 585 has been created,
and tried to dial an international number a couple of times.
I appreciate the help.
Chris
Larry wrote:
> Chris Arndt wrote:
>
>
>> Our TVA50 is acting strange. It's connected to a KX-TA824 with
;t need outgoing access, also set ksu vm port cos for
> no outbound co access or at least toll restrict for no 0+ and i+ access.
>
> The hacker likes systems that answer inbound wats (8dd).
>
> -larry
>
>
>
> Chris Arndt wrote:
>
>
>> Thanks Larry. That appear
Fax is supported only in G.711 codec. You need also to use FAX signal
detection and FAX High Reliable Method (Original). Both parameters can be
found in1.3 Voice Communication Detailed Settings
The above settings are for 484 VoIP card.
Chris
- Original Message -
From: "MOH
1 - 100 of 113 matches
Mail list logo
