Tis strange that ALL of them exhibit the exact same problem. Try swapping the top half of a good phone to the bottom half of a bad phone to determine what part of the phone is bad.
On Sun, 11 Aug 2002 00:20:20 -0500 Timothy P Scharf <[EMAIL PROTECTED]> writes: > Hello All, > > I have about two dozen series 7000 Hybrid phones (7020, 7030, 7130) > that > seem to have the same problem. They have gone dead. > > When I connect them up to a PLC port (on a KX-T300), they are all > totally > dead. No lights, no display, nothing, just like it was never > plugged in. > > However, when I connect up to a HLC port, I get a dial tone in the > handset and can use the keypad to dial numbers. But there is no > display, > no lights, no ringer. It just acts like a single line phone (I > assume > this might be a power failure feature on these phones...). > > Has anyone out there worked much with these phones to know what > causes > them to fail? I have the service manuals for them, and every chip > on the > board seems to be getting power. My guess is the CPU chip on the > phones > has bit the dust, but I can't say for sure. Can anyone give me > some > insight? > > Thanks > Tim > ----------------------------------- Chris Snyder Advantage Telcom Cosby, Tn. Sevier County's oldest interconnect. _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
