Hi,
I installed darktable 2.0.5 from the ubuntu repository on a new
installed linux (ubuntu 16.04.1.). Selecting an image in lightroom and
clicking the print tab does not show the image in this tab after
opening, the size of the sheet can not be set (drop down menu does not
open), clicking "P
Hi,
I have some dng images, created by a scanner for diapositives. I tried
to open such dng files in darkroom but the images do not open for
processing. Only an error message is shown that the camara information
for white balance is not found.
The same images can be read and processed by Ra
I can not confirm this issue with dt 3.1.0+811 on Ubuntu 18.04. Tried
with retouch, spot removal and several other modules. Free path masks
are created as expected.
After updating to dt 3.1.0+963, I can confirm the behaviour (at least)
for retouch and spot removal. I tried several other module
Without any information about the hardware you are using it is difficult
to give you an estimation. Which CPU ? How much cores ? Is a GPU
available, if so : which GPU / Graphics Card ? Have you OpenCL enabled
in dt settings ?
For comparison : on my system (CPU with 6 cores, Hyperthreading), Nv
OK, understood. As far as I remember OpenCL cannot be enabled with intel
graphics cards because of several issues of intel drivers. There where a
number of questions about this in the forum
https://discuss.pixls.us/c/software/darktable/19 in the past. I'm not a
developer but as far as I know it
I agree with Dimitri. You would not think of switching off
"real-time-processing" if your graphics card would be properly
customized. Choosing the appropriate driver is not so difficult, there
are lists in the internet. And there are forums with tips for
configuration of different hardware conf
Update to git master 3.1.0+1016 changed the behaviour. Bug is now as
follows :
- Select module retouch for the first time
- Select any tool (circle or ellipse or free path or brush) and move the
mouse over the image area : tool symbols are not shown, the module don't
gets enabled (on/off icon
Workaround : First switch the module "on" by mouse clicking on the "on"
icon of the module. Then all the tools available are working as expected.
So the reason for the issue seems clear to me : the module is not
automatically enabled by clicking on a tool icon. BTW : the error
messages I menti
Hi David,
I can confirm, see my yesterdays mails :
https://www.mail-archive.com/darktable-dev@lists.darktable.org/msg05341.html
https://www.mail-archive.com/darktable-dev@lists.darktable.org/msg05342.html
The second shows a simple workaround.
Regards
_
Hi Axel,
darktable >= 3.0.0, lightable, darkroom, map, slideshow ... , press "h",
you will see a window with all available shortcuts and mouse actions in
the current context as long as you hold the key. This window is called
"accels window".
Hi Maurizio,
where do you find "views/thumbtable"
rieb am Do., 9. Apr. 2020, 12:44:
> Ciao Peter, I downloaded the it.po file from dt master branch on Github
>
> Il Gio 9 Apr 2020, 08:47 Peter Harde ha
> scritto:
>
>> Hi Axel,
>>
>> darktable >= 3.0.0, lightable, darkroom, map, slideshow ... , press "h"
Hi developers,
dt 3.1.0+1232, Ubuntu 18.04
In Ligthtable it is possible to reject an image by clicking the cross in
the lower left corner of the thumbnail. The cross is then displayed red.
But it is no longer possible to withdraw the rejection by clicking the
(red) cross again. The image stay
ackup files.
Best Regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
dt 3.1.0+1383
I can confirm, observing this behaviour for some weeks now
Best Regards
Peter Harde.
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
Apple, Microsoft and
many others. So I can't create an account.
Best regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
had my (bad) experiences with Google and co., believe me.
Patrick Shanahan schrieb am Di., 5. Mai 2020, 14:32:
> * Peter Harde [05-05-20 02:12]:
> > Hello,
> >
> > dt 3.1.0+1383
> >
> > 1. Select some images in lighttable
> > 2. Switch to map view, selected
Dear developers,
dt 3.1.0+1615, Ubuntu 18.04
observed behaviour :
* in lighttable select /sort by -> custom sort/
* grab an image with mouse, move it to another position, drop image
* nothing happens, image stays at it's old position, repositioning no
longer possible, sequence not changea
Dear developers,
dt 3.1.0+1650, Ubuntu 18.04
issue concerning sorting collections in lighttable changed but is still present
:
* in lighttable select "sort by" -> "custom sort"
* close dt, entry in darktablerc should be plugins/collection/sort=7 now
* open darktbalerc with text editor : you wi
Dear developers
3.1.0+1707~g1bd0d448b, Ubuntu 18.04, german
When calling the settings dialog several error messages are thrown on
terminal :
error: translation mismatch: `views/thumbtable/invert selection' vs.
`Bildauswahl invertieren'
error: translation mismatch: `views/thumbtable/select no
til they are edited by user
* combobox selection should not change unexpected when user modifies
input of (other) input fields
Best Regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
own in the bauhaus-slider(s) immidiately after selecting an
area from the image.
Best Regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
There is a ppa for ubuntu :
http://ubuntuhandbook.org/index.php/tag/darktable-3-0-ppa/
AFAIK it actually contains version 3.0.2.
Best regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to
warnings is pasted below, if you are
interested in the whole list, please let me know.
Best regards
Peter Harde
...
[ 3%] Built target darktablerc_file
~/darktable/src/external/libxcf/xcf.c: In function ‘xcf_write_image_header’:
~/darktable/src/external/libxcf/xcf.c:329:67: warning: ISO C99
| tee > build.log. This log file
does not contain the warnings. They are visible in terminal output if
you are scrolling back to about 3% of the build process. I had to
increase the number of buffered lines in my terminal to allow scrolling
back thus far.
Best regards
Peter Ha
tor -> film properties -> eyedropper for color of film base
* negadoctor -> eyedropper for D max
* negadoctor -> alternately fine tuning of D max and scan exposure bias
Best regards
Peter Harde
___
darktable de
Hi Jack,
just tried with 3.1.0+2164~ga64940338, Ubuntu 18.04, OpenCL active,
build about 3 or 4 days ago. I can not confirm. Tried several times with
fresh imported image(s) and an image processed previously. All behave as
expected, no freeze. I also deactivated OpenCL, no change, works as
ex
Hi Jack,
perhaps Ubuntu 20.04 makes the difference. Did you get any warnings or
error messages during build ? Did you try running dt with debug option
-d all ? Possibly you can get some more detailed info about your freeze.
Peter
Am 20.06.20 um 10:08 schrieb Jack Bowling:
Thanks, Peter. I di
I see. If I can find some time I plan to do a build from current master
this afternoon. Then I will try again to reproduce your freeze with an
up to date version of master. Unfortunately I can not try with 20.04,
not yet installed on any of my hardware.
Peter
Am 20.06.20 um 10:56 schrieb Jack
Hi Jack,
now using 3.1.0+2338~g6f9bc02c8, Ubuntu 18.04, OpenCL enabled. Still not
able to reproduce the issue you described.
Peter
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr.
Dear developers,
3.1.0+2376~g40f2f94e3, Ubuntu 18.04
CTRL-click on left eyedropper to select an area does not work any more.
To reproduce :
* select color zones module
* CTRL-click on left eyedropper, point selection mode is used instead
of area selection mode
Best regards
Peter Harde
are "heavy" due to the algorithms behind them. All the more
it seems very reasonable to me, to get OpenCL support for filmic 4.
Best regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send
his means that almost any
image (at least for my images) is processed with highlight
reconstruction enabled. I suspect that is what Alexander Rabtchevich
refers to in his mail from last wednesday.
My hardware is powerful enough, I can live with the actual state. But as
Alexander stated, proc
Thank you, in my opinion that is very reasonable.
Am 18.07.20 um 09:41 schrieb Hubert Kowalski:
There's a recent change introduced that changes highlight
reconstruction to +3 EV essentially disabling almost all of it.
___
ults = none.
Best regards, Peter Harde
Am 02.08.20 um 09:21 schrieb jys:
Quick question: is it intentional that filmic RGB is hidden by default in the
upcoming release? I only discovered this was the case by accident when I had to
nuke my darktablerc recently to solve a strange issue with the
:53 schrieb jys:
On Sun, Aug 2, 2020, at 00:47, Peter Harde wrote:
3.1.0+2523~gc94b5fda3, Ubuntu 18.04
For me filmic RGB is not hidden (and never was hidden in the past few
month using dt master).
Did you try with no existing configuration? When I run current master in a
virgin environment, this
3.3.0+258~g38d875b49, Ubuntu 18.04
Can you explain more precisely what you mean with "create a new image
folder". Do you mean importing from a folder into a new filmroll? If so,
I can not confirm, works as expected for me, no influence on retouch module.
Regards
P
. Generally this file is not
modified if you "git clone" / "git pull" and if you (after building and
installing) start darktable without command line options.
Peter Harde
Am 22.08.20 um 08:29 schrieb David Vincent-Jones:
Wrong diagnosis on my part it is occurring w
then
quit dt, relaunch dt, all your settings should be retained. If retouch
disappears, you should check if you edited the right file. Possibly you
have different versions of darktablerc on your system?
Peter Harde
Am 22.08.20 um 15:33 schrieb David Vincent-Jones:
Interesting . although re
ild of dt is running without any problem.
Best regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
without any problem.
Best regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
Am 29.08.20 um 14:15 schrieb Patrick Shanahan:
builds fine for me but your process is different.
git clone git://github.com/darktable-org/darktable.git
cd darktable
git submodule init ;git submodule update
./build.sh --enable-opencl --install --build-type RelWithDebInfo \
--prefix ~/darktable_r
Am 29.08.20 um 15:00 schrieb Patrick Shanahan:
my build *includes* the manuals
ls -la ~/darktable_repos/share/man/
total 0
drwxr-xr-x 6 paka users 48 Aug 27 10:01 .
drwxr-xr-x 9 paka users 107 Aug 27 10:01 ..
drwxr-xr-x 3 paka users 18 Aug 27 10:01 de
drwxr-xr-x 3 paka users 18 Aug 27 10:01 e
riable, it
pointed to a oracle-java-8 JRE. Pointing to openjdk-11 JRE now did the
trick. Again I have no idea why the identical configuration (JAVA_HOME
pointing to Java-8) worked on 18.04 but not on 20.04. Thank you very
much, once again, for your support.
P
Am 30.08.20 um 15:50 schrieb Nicolas Auffray:
Your last issue is not Ubuntu 20.04 I think. I never had that issue,
so probably something on your system for this one.
Yes, I agree. I'm programming Java and have installed two Java-JDK
versions (oracle java-8 and openjdk java-11). I use them to c
Looking back on your posts of the last months (and the personal ones we
had) I agree with Timur. In most cases you do not respond on the
question/request posted, but you are reprimanding people. You're acting
like the block leader of this mailing list. Some reluctance on your side
would be very
Hi Frank,
on dt 3.3.0+1006~ge31529f63, Ubuntu 20.04 I'm not able to reproduce.
Tried several times with different shapes on a really huge panorama
(24792x5552 pixel).
Best regards
Am 09.10.20 um 20:11 schrieb Frank Huebner:
Hello,
I used the retouch module on a large picture (10165 x 4018)
Hi Frank,
did you compare the order of the modules you applied in the pixelpipe
when the issue appeared and when it did not?
Peter
Am 11.10.20 um 20:34 schrieb Frank Huebner:
Hello!
Let me start with my thanks to Peter, Juha and István!
The crop and rotate module caused the problem. I deac
The modules are grouped. Selecting the group symbolized by the "power
switch" icon (most left) , the modules applied are shown in the order of
the pixelpipe (bottom - first, top - last). The order can be modified by
CTRL-SHIFT-dragging a module to a new position.
Frank Huebner schrieb am Di., 13.
Hi Frank,
I saw that in the "bad" image rotation module and crop and rotate was
done after retouch. Moving retouch up did not change anything
did you check if there are other modules modifying the geometry? Not
only crop and rotate is a candidate...
Could it help if I provide the picture and si
Am 09.11.20 um 11:37 schrieb juli...@i2pmail.org:
Maybe instead of saying "you should report this [at Microsoft Github]". Say "I've
copied this to [Microsoft Github]".
... not all people will want to expose themselves to Microsoft
I completely agree.
back to filmstrip, is not placed on map.
Possibly related to https://github.com/darktable-org/darktable/pull/6834.
Switched back to 3.3.0+1482~g2a0277747 where geotagging works.
Best regards
Peter Harde
___
darktable
used to show a warning if a deprecated module is selected, but
this black box is also shown for every other module.
Best regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to darktabl
arktablerc changes the settings as expected.
Best regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
Hi Stefan,
Am 04.01.21 um 08:57 schrieb Stefan Saam:
* select "date taken" as first rule (now "date-taken time" appears
as the second rule, set by darktable)
using current master (3.3.0+2547~gecd056cec) on Ubuntu 20.04 I'm not
able to reproduce. Selecting "date taken" as first rule only sho
Thank you for the fast response. Just checked with
3.3.0+2568~gaefd5d732, created two different presets. No further issues
recognized.
Peter
Am 04.01.21 um 14:07 schrieb Philippe Weyland:
Thanks for reporting. Should be solved now.
Philippe
__
Hi Laurent,
did you try dt 3.4.0 ? What hardware are you using? Sounds as if your
system is slow... There are several settings in preferences ->
lighttable controlling the creation of thumbnails. Did you try different
settings ?
Peter
Am 04.01.21 um 15:38 schrieb Laurent Zimmermann:
Using
t dialog in darktable needs ~18 s to display the 133
thumbnails although Dolphin needs only 2-3 s. So I guess the hardware
is not the most critical point, dont't you?
Laurent
Le mar. 5 janv. 2021 à 08:52, Peter Harde
a écrit :
Hi Laurent,
did you try dt 3.4.0 ? What hardware are you using? S
I build from git current master, gphoto2 is available and recognized at
build process. Nevertheless the buttton is not shown, even if I connect my
camera (Sony alpha 77). This camera does not support tethering, so I assume
this could be the reason for dt to hide the 'import from camera' button.
The
I'm on linux (lubuntu 20.04).
Hubert Kowalski schrieb am Mi., 6. Jan. 2021, 21:28:
> On windows I think it's also a requirement to change usb drivers
>
> śr., 6 sty 2021 o 21:22 Peter Harde
> napisał(a):
>
>> I build from git current master, gphoto2 is avail
Mica,
I think the question is not vague but very clear : What are the
requirements or conditions a camera or card reader must fullfill to be
recognized as "camera" in the sense that the button "import from camera"
is shown.
I would file an issue at gihub with pleasure, if github would not
v
ot;hierarchical tags" in "edit metadata exportation" dialog
(see red marker in attached screenshot export-crash.png)
* further setting of export dialog see second screenshot
(export-parameters.png)
* click "export"
Export works fine with same images if "hierar
Hi Pascal,
I would do this with pleasure, but unfortunately it's not possible. I
can't create an account there, because github massively violates the
privacy settings of my browser.
Am 17.03.21 um 10:19 schrieb Pascal Obry:
Hi Peter,
Please report to GitHub.
https://github.com/darktable-or
Hi Matthias,
about 25 minutes ago Pascal created an issue at github, he could
reproduce, too. So I think it's not necessary to provide a git bisect.
Thank you.
Am 17.03.21 um 11:00 schrieb Matthias Andree:
Am 17.03.21 um 10:29 schrieb Peter Harde:
Hi Pascal,
I would do this with ple
)
* click export
Images are exported as shown in third screenshot
(wrong-order-export-3.png), order is reversed.
Best regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr
wrong.
Best regards
Peter Harde
Am 21.03.21 um 18:20 schrieb William Ferguson:
Your file manager list is sorted by name descending. Click on name
again and it will be sorted in ascending order.
___
darktable developer
Someone will have to create an issue on GitHub.
Yes, but always the same dilemma for me with creating a github
account... So I hope someone will take pity...
Regards
Peter Harde
___
darktable developer mailing list
to
I think you should not abuse the developers' time to raise issues on
your behalf, expecting them to do something that you feel violates
privacy (even if they were already foolish enough to have sold their
souls to the Devil so they can develop software for you and for me).
Ironical remaks do not
Am 24.03.21 um 16:42 schrieb William Ferguson:
Here's the information required for reporting a bug. Fill it out so we
can copy and paste it...
Thank you, here is the information I can provide. Open for further
questions if needed.
**Describe the bug/issue**
Moving a selection of images in
You are right, my fault pasting the wrong string. The correct version is
of course *gcc 9.3.0-1ubuntu2*. Thank you for pointing that out.
Peter Harde
Am 25.03.21 um 17:26 schrieb Jack Bowling:
Peter - Recent Ubuntus are on at least gcc version 9.x so you either
are using an ancient gcc or you
Dear developers,
dt git master reproducibly crashes (segfault) when selecting a preset
fom the hamburger menu of import module in lighttable.
* darktable version : dt 3.5.0+1596~g87b380c61
* OS : Linux - kernel 5.4.0-70.78
* Linux - Distro : Ubuntu 20.04
* Memory :
Hi,
dt git master 3.5.0+1685~ge6a12721e, Ubuntu 20.04
Can not confirm. Do you see the same behaviour if you have all thumbnail
images in every size available in cache (see darktable-generate-cache)?
Please provide more details about your hardware and installation, OS, dt
version, OpenCL enabl
Hi Jan,
did you try with an empty ~/.config/darktable (backup first !!!).
Sometimes weird things happen when darktablerc or database is corrupted
(or contains corrupted entries).
As far as I remember 3.4.1.1 is a *windows-only* bugfix. Not sure what
happens if you try to run it on Manjaro Li
450.102.04
* OpenCL installed : yes
* OpenCL activated : yes
* Xorg : 1.20.9-2ubuntu1.2~20.04.1
* Desktop : LXQt
* GTK+ : 3.24.20-0ubuntu1
* gcc : gcc 9.3.0-1ubuntu2
Best
ver 450.102.04
* OpenCL installed : yes
* OpenCL activated : yes
* Xorg : 1.20.9-2ubuntu1.2~20.04.1
* Desktop : LXQt
* GTK+ : 3.24.20-0ubuntu1
* gcc : gcc 9.3.0-1ubuntu2
Best regards
Peter Harde
___
Hi Dimitri,
no images have been renamed, they are "as imported". Lighttable mode
"custom sort" is activated during import. Do you use the current git
master in "filemanager mode" and "custom sort"? Last stable version
3.4.1 does not show this issue.
Am 20.04.21 um 10:47 schrieb Dimitri Gathy
... I tried it on Lr & Cp1... if you think i'm stupid!...
? What has my bug report to do with Lightroom or CaptureOne ??
Why should I think you are stupid ?
"as imported" is the problem... The exif are the reference to sort the
images in lightable
What is "The exif" ? Which exif
Hi Solarer,
Am 20.04.21 um 23:24 schrieb Solarer:
Well, beat me. I was able to reproduce on 3.5.0+1747~gc22f6a90e-dirty
Manjaro Linux. Selecting 3 images in custom sort mode (file manager
layout) and moving them around using drag and drop does invert the
order of the selected pictures. The s
Hi Martin,
Am 20.04.21 um 22:42 schrieb Martin Straeten:
are you using a preview resizing setting in preferences? If the
setting is not original the sensitive area seems to be minimized.
No, preferences -> darkroom -> *reduce resolution of preview image* is
kept at it's default state *origina
Just checked with 3.5.0+1789~gd7ea92f40. Brush tool is working fine
again. Thank you, Pascal.
Am 21.04.21 um 07:13 schrieb Pascal Obry:
I have fixed this issue yesterday.
Cheers,
___
darktable developer mailing list
to u
: yes
* Xorg : 1.20.9-2ubuntu1.2~20.04.1
* Desktop : LXQt
* GTK+ : 3.24.20-0ubuntu1
* gcc : gcc 9.3.0-1ubuntu2
Best regards
Peter Harde
___
darktable developer mailing list
to
Hi Mica,
created a fresh clone in a new directory, did a new build, but same
behaviour.
Am 30.04.21 um 16:48 schrieb Mica Semrick:
Vibrancergb has been removed. Clean your build and source directory
and rebuild.
___
d
Thank you all for the hints, dt is launching now. Cleaning
/opt/darktable did the job.
Am 30.04.21 um 17:19 schrieb Pascal Obry:
Le vendredi 30 avril 2021 à 17:14 +0200, Peter Harde a écrit :
Hi Mica,
created a fresh clone in a new directory, did a new build, but same
behaviour.
You need to
els des Musters »liblua5.4-dev« konnte kein Paket gefunden werden.
N: Mittels regulärem Ausdruck »liblua5.4-dev« konnte kein Paket gefunden
werden.
Best regards
Peter Harde
___
darktable developer mailing list
to unsubscr
same message during build process.**Seems that I
would need further instructions where I have to add this option.
Regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
Sorry for the noise. The message during build process is present further
on, but nevertheless the LUA script manager is back again. Modifying
*DefineOptions.cmake* did the trick.*
*
___
darktable developer mailing list
to u
Never fall back to the intree
copy of lua" OFF)* in *DefineOptions.cmake*
Best regards
Peter Harde
Am 17.07.21 um 18:10 schrieb William Ferguson:
Terry, do you have lua 5.4 installed on your fedora system? Are you
using a fedora packaging script to build darktable? Or, are you
getting
04
dt master 3.7.0+959~g014b447f0
Best regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
ngs -> filtered images" does nothing
Now using 3.7.0+1046~g79fb97ced
Linux 5.4.0-84-generic
Ubuntu 20.04 LTS
Best regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
Thank you Philippe,
I followed your yesterdays activity on github and just created a "dirty"
build with your fix in map.c (line 2039). After five minutes of testing
and clicking around non of the reported issues occurred, functionality
of the map view seems to be back.
Peter
You can start dt from the commandline by the command
*darktable *
and it will open only this single file. Or you can use
*darktable *
to open all files from the selected folder. See
https://darktable-org.github.io/dtdocs/special-topics/program-invocation/darktable/
Regards
Peter Harde
more when entering a search keyword.
Best regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
mains empty. Because the epoch time is at least saved as
signed integer, negative values represent dates/times before 1970-01-01.
dt should not ignore them.
Best regards
Peter Harde
___
darktable developer mailing list
to uns
dates before 1970-01-01.
Best regards
Peter Harde
___
darktable developer mailing list
to unsubscribe send a mail to darktable-dev+unsubscr...@lists.darktable.org
xties changing date
and/or time for them. Geotagging module worked without any trouble. For
me the modifications seem to be ok. Did not test applying gpx tracking
data, no such device available. Thank you very much.
Best regards
Peter Harde
Am 12.11.21 um 20:05 schrieb Philippe Weyland:
PR #103
Hi Philippe,
yes, but I never had problems at import until now. The images of
interest here are reproductions of negatives or slides, reproduced with
a Sony DSLR. Of course they have "DateTimeOriginal" of the reproduction
date/time (2019-2021). Then :
* batch processing with exiftool, chang
After replying to your mail I Just read your feature request
https://github.com/darktable-org/darktable/issues/10398. As said, no
problems at import, dates before linux epoch 0 show correct
"OriginalDateTme" in "image information" module just as in the sidecar
file. For the variables like $(EXI
Am 13.11.21 um 21:34 schrieb Coding Dave:
darktable will never change the raw file but you might want to change
the date taken exif information.
I absolutely agree, darktable should never change the raw file. That's
the reason why I use exiftool to rough adjust "DateTimeOriginal" of the
raw fil
Hi Philippe,
here are the results of the pending tests :
* darkroom -> pattern for image information line :
$(EXIF_DAY).$(EXIF_MONTH).$(EXIF_YEAR) •
$(EXIF_HOUR):$(EXIF_MINUTE):$(EXIF_SECOND) • $(FILE_NAME) •
$(MAKER) $(MODEL) • $(LENS) • $(EXIF_EXPOSURE) s •
f/$(
exiftool changing the DateTimeOriginal *is*
altering the original raw file and may cause you lose of data by altering
the original.
Changing a parameter which is definitely wrong is not a loss of data but
a correction. exiftool preserves the original file by adding
"|_original|" to the file name
dt 3.9.0-1048-g0c0494edf
dt 3.9.0-1056-g878e631fa
show "unknown-version" in the "About" dialog (see attached screenshot)
git describe --tags
release-3.9.0-1056-g878e631fa
is ok
Best reagrds
P.Harde
___
darktable develop
1 - 100 of 102 matches
Mail list logo
