nk.
- Original Message -
From: Rick Brass
To: cnc-list@cnc-list.com
Sent: Mon, 12 Nov 2012 16:30:40 -0000 (UTC)
Subject: Re: Stus-List Rudder Re-build/replacement now transom hung
You only looked at 30 boats? What a piker. I dragged my then girlfriend around
marinas and yards in PA, NJ, a
the bushing with the
gudgeon still on the boat.
Mark
- Original Message -
From: Rick Taillieu
To: cnc-list@cnc-list.com
Sent: Tue, 13 Nov 2012 23:47:23 - (UTC)
Subject: Re: Stus-List Rudder Re-build/replacement now transom hung
Mark, I had a nylon bushing put in the lower gudgeon a
st.com
Sent: Tue, 13 Nov 2012 13:19:12 - (UTC)
Subject: Re: Stus-List Rudder Re-build/replacement now transom hung
MArk Where did you get the
sleeves for this?
From: CnC-List
[mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Mark
G
Sent: Monday, November 12, 2012 11:33 AM
To:
cnc-list@
Nemesis
'75 C&C 25 # 371
Shearwater Yacht Club
Halifax, NS.
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Mark G
Sent: November-12-12 11:33 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Rudder Re-build/replacement now transom hung
Rick,
With a q
MArk
Where did you get the sleeves for this?
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Mark G
Sent: Monday, November 12, 2012 11:33 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Rudder Re-build/replacement now transom hung
Rick
7;t care!
1981 40-2
David F. Risch
(401) 419-4650 cell
-Original Message-
From: Leslie Paal
Date: Mon, 12 Nov 2012 19:56:57
To:
Subject: Re: Stus-List Rudder Re-build/replacement now transom hung
After sailing/racing for about 10 years
ship)
From: Rick Brass
To: cnc-list@cnc-list.com
Sent: Monday, November 12, 2012 8:30 AM
Subject: Re: Stus-List Rudder Re-build/replacement now transom hung
You only looked at 30 boats? What a piker. I dragged my then girlfriend around
marinas and yards in PA, NJ, and Chesapeake Ba
List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Mark G
Sent: Monday, November 12, 2012 11:00 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Rudder Re-build/replacement now transom hung
The support under the mast in the cabin is very robust on the 25 Mk1. (Not
only has mine resi
e C&C 27. It's just an
aluminum channel section.
I had the gudgeons sleeved last year.
Mark
- Original Message -
From: Rick Brass
To: cnc-list@cnc-list.com
Sent: Sun, 11 Nov 2012 23:29:06 - (UTC)
Subject: Re: Stus-List Rudder Re-build/replacement now transom hung
I was a
2 21:19:59 - (UTC)
Subject: Re: Stus-List Rudder Re-build/replacement now transom hung
Hi Mark, The 25’s fibreglass rudder is made in 2 halves bonded together.There
is wood laminated in the upper part, ending about 1-1½” below the lower gudgeon
plate, below that it’s hollow.There is a small
Subject: Re: Stus-List Rudder Re-build/replacement now transom hung
Ok, somebody’s gotta say it… does this mean we’re back to foredeck cows for
the winter blues…
>to putting some bushings into the pintles and gudgeons to compensate for years
>of wear and herd use..<
randy
Tama
un...@cnc-list.com] On Behalf Of Rick Brass
Sent: Sunday, November 11, 2012 3:29 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Rudder Re-build/replacement now transom hung
I was about to say exactly what Rick said, based on 18 years of experience with
my 25 mk1. The rudder for the MK2
ck Taillieu
Sent: Sunday, November 11, 2012 4:20 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Rudder Re-build/replacement now transom hung
Hi Mark,
The 25’s fibreglass rudder is made in 2 halves bonded together.
There is wood laminated in the upper part, ending about 1-1½” below th
ping, might be cheaper to ship the two
pieces separately!
Mark
- Original Message -
From: Rick Brass
To: cnc-list@cnc-list.com
Sent: Sat, 20 Oct 2012 04:50:20 - (UTC)
Subject: Re: Stus-List Rudder Re-build/replacement
The rudder stock on my 38 was bent during a hard grounding in a
Mark
- Original Message -
From: Rick Brass
To: cnc-list@cnc-list.com
Sent: Sat, 20 Oct 2012 04:50:20 - (UTC)
Subject: Re: Stus-List Rudder Re-build/replacement
The rudder stock on my 38 was bent during a hard grounding in a thunderstorm
in 2004. Actually it was OK until TowBoat US pul
Sent: Tuesday, October 23, 2012 8:55 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Rudder Re-build/replacement
So some appear to have solid shafts and some have 2.25" O.D. 0.25 wall
hollow shafts. That is what I think mine is, but am not quite sure,
although at the top of mine there is a
So some appear to have solid shafts and some have 2.25" O.D. 0.25 wall hollow
shafts. That is what I think mine is, but am not quite sure, although at the
top of mine there is a narrower bit with a square nut which looks welded on
almost like the shaft was hollow.
I am looking at getting Compe
om: "Rick Brass"
To: cnc-list@cnc-list.com
Sent: Monday, October 22, 2012 8:38:48 PM
Subject: Re: Stus-List Rudder Re-build/replacement
The shaft on the original rudder for my 38 mk1 was 2" schedule 80 stainless
tube (2 1/4 OD and wall thickness about 1/4", IIRC) It h
NJ
- Original Message -
From: "Alex Giannelia"
To: cnc-list@cnc-list.com
Sent: Monday, October 22, 2012 2:10:26 PM
Subject: Stus-List Rudder Re-build/replacement
For those who did a post mortem on their stainless steel shafts, were they
hollow or solid?
ALEX GIANNELIA
Phone (
2:10 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Rudder Re-build/replacement
For those who did a post mortem on their stainless steel shafts, were they
hollow or solid?
ALEX GIANNELIA
Phone (416) 203-9858
Fax (416) 203-9843
Cell (416) 529-0070
email: a...@airsensi
Alex.
The rudder shaft on my 38mkIIC was solidincluding the welded blade, it took
two people to move it around.
Ron C
Impromptu.38 MKIIC '77
Sent from my iPhone
On Oct 22, 2012, at 12:10 PM, Alex Giannelia wrote:
> For those who did a post mortem on their stainless steel shaft
un...@cnc-list.com] On Behalf Of Alex
Giannelia
Sent: Monday, October 22, 2012 2:10 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Rudder Re-build/replacement
For those who did a post mortem on their stainless steel shafts, were they
hollow or solid?
ALEX GIANNELIA
Phone (416) 203-9858
Fa
an
C&C 39
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alex
Giannelia
Sent: Monday, October 22, 2012 2:10 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Rudder Re-build/replacement
For those who did a post mortem on their stainless steel shaf
For those who did a post mortem on their stainless steel shafts, were they
hollow or solid?
ALEX GIANNELIA
Phone (416) 203-9858
Fax (416) 203-9843
Cell (416) 529-0070
email: a...@airsensing.com
WEB: www.airsensing.com
___
This List is pr
Alex,
South Shore Yachts also has some rudders listed on the website. Don't
recall if they have yours.
Joel
Sent from my iPad
On Oct 21, 2012, at 8:07 PM, Alex Giannelia wrote:
> Thanks guys for all the input and I will contact Ron off list, so now that I
> see you went to various shops, did
Thanks guys for all the input and I will contact Ron off list, so now that I
see you went to various shops, did you go with the original planform/foil
combo, or did these shops build you something different and the other question,
is if you notice any performance differences.
ALEX GIANNELIA
C
are the same
company. My understanding is that Competition Composites grow out of Phil’s
foils when they expanded into other areas.
Steve
1983 C&C 37
From: David Folsom
Sent: Saturday, October 20, 2012 11:29 AM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Rudder Re-build/replacement
I
ter and bright
> sun.
> > Foss did suggest painting the rudder a light color, but told me all the
> > things they do to prevent water intrusion and to reinforce the seam
> against
> > expansion of the foam.
> >
> > I went with Foss because of a lower cost, less hassl
> delivery. So far I'm quite happy with the new rudder.
>
>
> Rick Brass
> Washington, NC
>
>
>
>
> -----Original Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alex
> Giannelia
> Sent: Friday, October 19, 2012 1:56
>
> Rick Brass
> Washington, NC
>
>
>
>
> -----Original Message-
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alex
> Giannelia
> Sent: Friday, October 19, 2012 1:56 PM
> To: cnc-list@cnc-list.com
>
and quicker
delivery. So far I'm quite happy with the new rudder.
Rick Brass
Washington, NC
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alex
Giannelia
Sent: Friday, October 19, 2012 1:56 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Ru
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of dwight
veinot
Sent: Friday, October 19, 2012 4:30 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Rudder Re-build/replacement
I don't get it...did C&C make bad rudders or what??? Seems
ry well without
one!!!
Dwight Veinot
C&C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of RAYMOND
SHIBE
Sent: October 19, 2012 5:17 PM
To: CnC
Subject: Re: Stus-List Rudder Re-build/replacement
Ale
Alex,
Had replace a rudder in 2010 for "Stinky Dog" a 1984 C&C 41. South Shore
Yachts
built one from sratch. No complaints.
It was the better part of $7000.00 including brokerage fees
and shipping to New Jersey. Shipping would probably be less to Toronto
and no brokerage costs.
Ray Shibe
Has
h such a project.
Good luck.
Ron Casciato
Impromptu
C&C 38MKIIC '77
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alex
Giannelia
Sent: Friday, October 19, 2012 1:56 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Rudder Re-build/replaceme
Impromptu
C&C 38MKIIC '77
-Original Message-
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Alex
Giannelia
Sent: Friday, October 19, 2012 1:56 PM
To: cnc-list@cnc-list.com
Subject: Stus-List Rudder Re-build/replacement
Has anyone on the list replaced or re-built the
Has anyone on the list replaced or re-built their rudder?
ALEX GIANNELIA
CC 35-II (1974) WILL BE RENAMED
ON THE HARD SINCE NOV. 2006
Toronto Ontario
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
37 matches
Mail list logo
