Hi Lisa,
The attached files were written to extract claim data for a vendor request.
Professional charges are excluded, and there are a couple of other custom
changes, but this should at least give you a place to start.
Hope this helps,
Jerry Beals
Holyoke Medical Center
Holyoke, MA
>>> "Pen
Has anyone been able to create an NPR that will pull in the charge
fields on a UB04? We are trying to capture the Rev Codes, Charges,
Units, Date, Amount etc in a download format but have had issues with
the BAR.CLAIM.IMAG DPM and trying to decipher how to get what we need
from that. Any help wou
> We are client server version 5.5 SR3. Has anyone successfully printed
> UB04's paper claim? Also, if so, please provide printer model and
> settings. Your imput is greatly appreciated.
>
> Thank you,
> Katie Fogarty, RN
> Assistant Director
> Information Systems
> Greater Hazleton Health Allia
MAIL PROTECTED]> To: "'Peter J. Campos, Jr.'"
<[EMAIL PROTECTED]>, Subj: Re: [MEDITECH-L] UB04
Printing Date:
Thu, 26 Jul 2007 13:05:17 -0700 Unfortunately, this is not a problem with
Meditech at all,
because if it wa s, I'm confident they would have a resoluti
Peter:
The problem is not necessarily with the edge-to-edge (which I believe just
gives you the ability to move the paper side-to-side and top-to-bottom to align
it with the printing), but rather the problem is that the form itself is set-up
to print 82 characters per line at 10 CPI, but laser
459-6418 / Ext. - 56418 / Cell - (559) 250-7974 / Pager - (559)
488-8358 / Fax - (559) 459-6025
[EMAIL PROTECTED]
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter J. Campos,
Jr.
Sent: Thursday, July 26, 2007 11:40 AM
To: meditech-l@mtusers.com
Subject: [MEDITECH-L] UB04 Prin
Hello All!!!
I am new to this list, and I hope that this issue has not
been covered already. I have noticed a few posts concerning UB04 printing,
and also settings that have worked for other organizations. I have also
seen the Meditech Knowledge Base articles on this. I have run
I think I may know what to do here, since we already have a report that
sends data in the proper UB92 format, but - in the interest of not
reinventing the wheel - does anyone out there have an NPR report that
they use to generate UB04 data for the Maryland QI Project? (Just for
comparison purposes
I am curious to know if anyone else is experiencing issues with FL80 on
the UB04 given the reduced field size. We are having problems populating
the "city,st zip" info from Meditech using the standard INS C,ST,Z claim
check value or even a custom that Meditech provided. Meditech is
pointing to our
We have set up our new UB04 claims using access e-forms and red forms. The
eforms are working great. However, when printing a red UB04 form to an HP4200
printer, it works great for awhile and then inexplicably skips the first line
and continues to skip a line for every form afterward until we
: [MEDITECH-L] UB04 Form Overlay
Please respond to list serve - we are interested as well
Sharri
Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient(s) and may contain confidential
and privileged information. Any unauthorized
ot; <[EMAIL PROTECTED]>,,
Subj: RE: [MEDITECH-L] UB04 Alignment
Date: Mon, 21 May 2007 15:29:57 -0500
Barry, we are Magic 5.4sr2 and I just test these settings on our HP4200
and you are correct on all counts. The far right character does print
with your settings! I also agree with the 1 ch
@MTUsers.com [mailto:[EMAIL PROTECTED] On
Behalf Of Roudebush, Sharri
Sent: Sunday, May 20, 2007 12:31 PM
To: Patla, Rich - CRH; meditech-l@MTUsers.com
Subject: RE: [MEDITECH-L] UB04 Form Overlay
Please respond to list serve - we are interested as well
PM
To: meditech-l@mtusers.com
Subject: [MEDITECH-L] UB04 Alignment
Several weeks ago, I sent out email stating that we had achieved UB04
alignment, only to learn from a number of you that I had failed to
notice that 1 character had been truncated from the right hand margin.
Now, with less confidence
Hello, we are trying to setup a 4200tn HP printer and we are having some
issues. We have one blank line at the top. We change the settings and
nothing helps. We are using 4200 pcl 6 drivers. We are a magic
hospital and v. 5.5. The printer settings we are using are:
1X= -10
Y= +20
Medite
Armstrong County Memorial Hospital
Director of Patient Accounting
Phone:724-543-8611
[EMAIL PROTECTED]
-Original Message-
From: meditech-l@MTUsers.com [mailto:[EMAIL PROTECTED] Behalf Of Patla, Rich -
CRH
Sent: Thursday, May 17, 2007 11:12 AM
To: meditech-l@MTUsers.com
Subject: [
Several weeks ago, I sent out email stating that we had achieved UB04
alignment, only to learn from a number of you that I had failed to
notice that 1 character had been truncated from the right hand margin.
Now, with less confidence, I'm sending out email again, this time asking
for confirmation o
We are utilizing FormFast and we need the UB04 form overlay. Is anyone
willing to share their form overlay ?
Thanks
Rich Patla
CHW - Arizona
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
To subscribe or unsubscribe to the meditech-l, visit MTUsers.NET.
To check the status of the meditech-l,
n UB forms.
>
> I hope this helps!
>
> Jay Gilmore
>
> Systems Analyst
> Crisp Regional Hospital
> (229) 276-3173
> [EMAIL PROTECTED]
>
>
> -Original Message-----
> From: meditech-l@mtusers.com [mailto:[EMAIL PROTECTED] On Behalf Of
> Kane, Pete
&g
: Tuesday, May 15, 2007 9:26 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]; meditech-l@mtusers.com
Subject: RE: [MEDITECH-L] UB04 and Field 51
There is a Health Plan ID field in the MIS insurance dictionary.
Rebecca Landa
Financial Systems Analyst
The New York Eye & Ear Infirmary
3
Pete,
We have a Model 4250n and a 4250tn. The settings listed below will correctly
print the UB04.
For the Elf Settings Dictionary use the following:
Mnemonic UB04Active Y
Name UB04
Report BAR.PAT.frm.ub04
Orientation PORTRAIT Macro
73
[EMAIL PROTECTED]
-Original Message-
From: meditech-l@mtusers.com [mailto:[EMAIL PROTECTED] On Behalf Of
Kane, Pete
Sent: Tuesday, May 15, 2007 5:25 PM
To: meditech-L (E-mail)
Subject: [MEDITECH-L] UB04 Paper Form Alignment
Hello Everyone:
I am having alignment issues with my UB04 printing f
Hello Everyone:
I am having alignment issues with my UB04 printing from Meditech on the
following printers:
Hewlett Packard LaserJet 4200n
Hewlett Packard LaserJet 4250n
One problem: I am unable to adjust the MIS Electronic Forms (ELF) Dictionary
LEFT MARGIN from 0.2 to
] On
Behalf Of Gary Ring
Sent: Monday, May 14, 2007 7:56 AM
To: Caskey, Pam; meditech-l@mtusers.com
Subject: Re: [MEDITECH-L] UB04 and Field 51
Pam:
Meditech is wrong, or your Consultant isn't aware, because I
have notified Me
Hey
Does anyone mind sharing their Medicare outpatient claim form setup? I want
to compare to mine just to make sure I am remotely close?
Thanks a bunch!!
Amy
Amy P. Rhodes
Financial Support Analyst
Duplin General Hospital
910.296.2641
"A pessimist sees the difficulty in every opportunity; an
Pam:
Meditech is wrong, or your Consultant isn't aware, because I have notified
Meditech of this issue in the past and have created a Task for it, because my
interpretation of the NUBC specs is that (1) FL 51 is required, and (2) the
payer's legacy number must be there if there is no Health P
as been defined between
trading
partners"
Line A is required on the UB04. B and C are Situational.
Rich
%%
Fri May 11, 2007 9:08 pm From: "Caskey,
Pam"
From: "Caskey,
Pam"
To:
Subj: [MEDITECH-L] UB04 and Field 51
Date: Fri, 11 May 2007 07:13:47 -0400
Is anyone else having issues on the UB04 and field 51 "HEALTH PLAN ID"?
I am being told by Blue Cross and others that the Legacy number must go
in this field or the claim will no
Is anyone else having issues on the UB04 and field 51 "HEALTH PLAN ID"?
I am being told by Blue Cross and others that the Legacy number must go
in this field or the claim will not be processed. The response from
Meditech was that they had never heard of this? I had also heard it on
the Medicare
: [MEDITECH-L] UB04 On HP 4250 Laserjet
The problem is our print is not an edge-to-edge printer so we can't adjust
the X or Y printing settings and all of these from the L have newer
printers.
We need help with our printers purchased 7 years ago.
Hewlett Packard LaserJet # 4050N
-Ori
:* Bodnar-Anderson, Cindy
*Subject:* RE: [MEDITECH-L] UB04 On HP 4250 Laserjet
The problem is our print is not an edge-to-edge printer so we can't
adjust the X or Y printing settings and all of these from the L have
newer printers.
We need help with our printers purchased 7 years ago.
Hewlett Pa
02, 2007 11:50 AM
To: Woodson, Wilma
Cc: Bodnar-Anderson, Cindy
Subject: RE: [MEDITECH-L] UB04 On HP 4250 Laserjet
The problem is our print is not an edge-to-edge printer so we can't adjust the
X or Y printing settings and all of these from the L have newer printers.
We need help wit
Well, I have some good news (and hopefully my last post on the topic).
After many tedious and excruiating hours of testing, I think I have found the
settings that will work. The keys to getting this to work are:
1. First, finding the CPI settings that will allow ALL characters on the line
to p
t;
>
> From: JEAN GOODMAN [mailto:[EMAIL PROTECTED]
> Sent: Friday, April 20, 2007 2:23 PM
> To: meditech-l@MTUsers.com
> Subject: [MEDITECH-L] UB04 print edge to edge printer required
>
> Does anyone know of the HP printer needed
pril 24, 2007 10:38 PM
To: JEAN GOODMAN; meditech-l@mtusers.com
Subject: RE: [MEDITECH-L] UB04 print edge to edge printer required
The HP4250 has been tested and will work fine. I believe the HP4300
will work as well but we have not yet tested it. I'm at home now and
don't have the exact set
Peabody, MA 01960
978-807-1573
-- Forwarded Message: --
From: "Kuse, Nancy" <[EMAIL PROTECTED]>
To: "Gary Ring" <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>
Subject: RE: [MEDITECH-L] UB04 Print Problems
Date: Thu, 26 Apr 2007 14:58:47 +
Gary
we will let
you know.
Michele Clark
Good Samaritan Hospital
From: JEAN GOODMAN [mailto:[EMAIL PROTECTED]
Sent: Friday, April 20, 2007 2:23 PM
To: meditech-l@MTUsers.com
Subject: [MEDITECH-L] UB04 print edge to edge printer required
Does anyone know of the
We are preparing to go-live with our UB04/1500 claim forms. I was wondering
if sites that have gone live with the changes would be willing to share
their experiences since going live. Also, we use Epremis to process our
claims so I would love to hear those experiences as well. Any information
wo
It's the LJ 4250, not the 5250 (which doesn't exist).
From: meditech-l@MTUsers.com [mailto:[EMAIL PROTECTED] On Behalf
Of JEAN GOODMAN
Sent: Friday, April 20, 2007 4:23 PM
To: meditech-l@MTUsers.com
Subject: [MEDITECH-L] UB04 print edge to edge printe
HP4250
From: meditech-l@MTUsers.com [mailto:[EMAIL PROTECTED] On Behalf
Of JEAN GOODMAN
Sent: Friday, April 20, 2007 5:23 PM
To: meditech-l@MTUsers.com
Subject: [MEDITECH-L] UB04 print edge to edge printer required
Does anyone know of the HP printer needed to
_
From: meditech-l@MTUsers.com [mailto:[EMAIL PROTECTED] On Behalf
Of JEAN GOODMAN
Sent: Friday, April 20, 2007 02:23 PM
To: meditech-l@MTUsers.com
Subject: [MEDITECH-L] UB04 print edge to edge printer required
Does anyone know of the HP printer needed to print edge to edge for
paper UB04's? I was
ROTECTED]>
To: Gary Ring <[EMAIL PROTECTED]>
Subject: Re: FW: [Fwd: Re: [Fwd: [MEDITECH-L] UB04 Print Problems]]
Date: Tue, 24 Apr 2007 13:56:15 +
Gary: Your right...I had not entered info for the third value code
field. I had the same issue, last digit did not print.
We've been
: [MEDITECH-L] UB04 Print Problems
We are having problems getting all characters to print on the UB04 form.
The last character (character 83) on some lines, specifically FL41 (Value
Codes/Amount) line and FL65 (Employer Name) line, is truncating the
last/right-most character in those fields.
We
Original Message
Subject: Re: [Fwd: [MEDITECH-L] UB04 Print Problems]
Date: Mon, 23 Apr 2007 09:03:08 -0400
From: Daniel Blais <[EMAIL PROTECTED]>
To: Howard Chase <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]>
Gary: We have been successful with pri
Does anyone know of the HP printer needed to print edge to edge for paper
UB04's? I was told HP5250 but can not find that on HP? TIA...Jean
Jean Goodman
Spring Harbor Hospital
[EMAIL PROTECTED]
207-761-2320
CONFIDENTIALITY NOTICE: This email message, including any attachments, is for
the use
We are having problems getting all characters to print on the UB04 form. The
last character (character 83) on some lines, specifically FL41 (Value
Codes/Amount) line and FL65 (Employer Name) line, is truncating the
last/right-most character in those fields.
We are using an HP 4250n, with and
AIL PROTECTED]
From: "Amy Rhodes" <[EMAIL PROTECTED]>
To: "MeditechL"
Subj: [MEDITECH-L] UB04 Field 76B Attending phys qualifier
Date: Fri, 30 Mar 2007 10:03:33 -0400
How are you setting up field 76B to print qualifier? Would this be set up
as a map?
Thanks
Amy
How are you setting up field 76B to print qualifier? Would this be set up
as a map?
Thanks
Amy
Amy P. Rhodes
Financial Support Analyst
Duplin General Hospital
910.296.2641
"A pessimist sees the difficulty in every opportunity; an optimist sees the
opportunity in every difficulty."
Sir Winston
this
copy from your system. Thank you.
-Original Message-
From: meditech-l@MTUsers.com [mailto:[EMAIL PROTECTED] On Behalf
Of [EMAIL PROTECTED]
Sent: Monday, March 26, 2007 5:50 AM
To: meditech-l@MTUsers.com
Subject: [MEDITECH-L] UB04 Type Of Bill
I can't get the Type Of Bi
@MTUsers.com [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL
PROTECTED]
Sent: Monday, March 26, 2007 2:50 AM
To: meditech-l@MTUsers.com
Subject:[MEDITECH-L] UB04 Type Of Bill
I can't get the Type Of Bill to print in box 4 of the UB04. The TOB is now a 4
character
field and the
I can't get the Type Of Bill to print in box 4 of the UB04. The TOB is now a 4
character
field and the four characters (eg 0123) are visible in the spool file but when
it prints on
the claim form, it only shows three (eg 012) with the right most digit
truncated. Does
anyone have a solution
am their scanners for the wrong spec?
Rich
%%
Sun Mar 11, 2007 10:24 pm From: [EMAIL
PROTECTED]
From: [EMAIL PROTECTED]
To: meditech-l@MTUsers.com
Subj: Re: [MEDITECH-L
n a long time since anyone had to
touch this
field. Have we forgotten about it?)
Rich McNeil
MIS Project Leader
Southcoast Hospitals Group.
%%
Wed Mar 7, 2007 11:51 am Fro
I'm posting this for our Business Office Manager..
1.Have any of you been successful at having your UB and 1500 fields to
line up correctly?
2.Were you able to get your physician's full names to print in the
correct format?
Thanks for your answers.
Cindy Wall
Systems Ana
, February 12, 2007 11:18 AM
To: Meditech (E-mail)
Cc: Roger Sipe; Pam Shull
Subject: [MEDITECH-L] UB04 required registration data
Hello 'L' ,
How are you addressing the new Form Locator 29 (Accident State)
information. I currently do not see anywhere in ADM registration
routines wh
Hello 'L' ,
How are you addressing the new Form Locator 29 (Accident State) information.
I currently do not see anywhere in ADM registration routines where we can
capture that information. I would think that the best option would be to
add a CDS on the B/AR tab. At the same time, you would think
Hi
Has anyone successfully tested the UB04 with Formfast? The form
overlay we got from them have boxes misaligned. Just wondering if
anyone else is having the same issue.
Thanks.
Rebecca Landa
Financial Systems Analyst
Original Message
Subject: RE: [MEDITECH-L] RE: UB04 claims and mpi
From:"Holley S. Wiggins"
Date:Wed, December 20, 2006 7:22 am
To: meditech-l@mtusers.com
---
443.-843-5148 office
410-588-0495 pager
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Carla Fuller
Sent: Tuesday, June 27, 2006 12:41 PM
To: Meditech-L list
Subject: FW: [MEDITECH-L] UB04 claims and mpi
All messages should be posted in
Sent: Tuesday, November 14, 2006 11:06 AM
To: meditech-l@MTUsers.com
Subject: [MEDITECH-L] UB04 and CMS 1500/08/05 ELF
I'm looking for information on ELF or what you are using to print the
new UB04 and 1500,our current vendor is terminating our licensing
agreement eff.April 30,2004 and wi
I'm looking for information on ELF or what you are using to print the new UB04
and 1500,our current vendor is terminating our licensing agreement eff.April
30,2004 and will no longer support the new changes .I'm also wondering if
anyone is using Access E-Forms?Any information would be appreciate
All messages should be posted in plain text. HTML will be converted to
attachments.The meditech-l web site is MTUsers.com
==
Hi All,
I contacted my Meditech specialist yesterday. She said the UB04 changes
are in beta testing right now. We can start getti
Applications Specialist
500 Osborn Blvd
Sault Ste. Marie, MI 49783
(906) 635-4663
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Tara Mcnamara
Sent: Monday, June 26, 2006 3:46 PM
To: Meditech L
Subject: [MEDITECH-L] UB04 claims and mpi
All
2133 ext 5017
[EMAIL PROTECTED]
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tara Mcnamara
Sent: Monday, June 26, 2006 12:46 PM
To: Meditech L
Subject: [MEDITECH-L] UB04 claims and mpi
All messages should be posted in plain text. HTML will be conve
All messages should be posted in plain text. HTML will be converted to
attachments.The meditech-l web site is MTUsers.com
==
Hi All,
We have to start rebuilding our claims in test for the new UB04 that is
coming out and to add the MPIs for future require
65 matches
Mail list logo
