Barry, we are Magic 5.4sr2 and I just test these settings on our HP4200 and you are correct on all counts. The far right character does print with your settings!!!!! I also agree with the 1 character shift to the left on those fields that you listed. I would ADD Fields 11,12,13,14,15,16,17to those fields needing a 1 character shift to the left, BUT I think if there was a 1 character shift to the left at the beginning of the line with FIELD 10 would take care of all the fields on this line. I had tested and tested last week on the HP4200 and couldn't find the right combinations of settings to get it to work and still print the far right character. Great Job! Do you know anything about the DEFAULT MACRO NUM on the Enter/Edit MIS Electronic Forms? What is the difference between 0000 and 99999 for this field? Now how do we get Meditech to make this change for everyone???? Nancy Kuse, PMP HIS Project Coordinator Lake Regional Health System 54 Hospital Drive Osage Beach, MO 65065 (573)348-8793 (573)348-8122 (fax) -----Original Message----- From: meditech-l@mtusers.com [mailto:[EMAIL PROTECTED] On Behalf Of Barry Christenson Sent: Friday, May 18, 2007 4:25 PM To: meditech-l@mtusers.com Subject: [MEDITECH-L] UB04 Alignment Several weeks ago, I sent out email stating that we had achieved UB04 alignment, only to learn from a number of you that I had failed to notice that 1 character had been truncated from the right hand margin. Now, with less confidence, I'm sending out email again, this time asking for confirmation of settings for the HP4200 series printers. I believe we have successfully printed the UB04 on a HP4200 and a HP4200dtn. The settings are... X1 Shift = -7 X2 Shift = -7 Y Shift = -2 The ELF settings in Meditech are... Report BAR.PAT.frm.ub04 Orientation PORTRAIT Paper Size 66 CPI 10.12 Left Margin 0.20 LPI 5.98 Top Margin 0.20 Text Len 64 Macro control program STANDARD Default Macro Num 99999 We are a MAGIC site on version 5.5. We have noticed that fields 66, 69, 74 and 81CC will require a 1 character shift to the left, but this is something that Meditech would need to do as a custom. Our main goal was to get the information down the right margin to print correctly and not drop characters. Can someone out there please confirm that these settings work at your site also? Thank you, Barry Christenson - Sr. Business Analyst Corporate Information Systems CRMC - Business Information Systems 1140 'T' Street, Fresno, CA 93721 Office: (559) 459-6418 / Ext. - 56418 / Cell - (559) 250-7974 / Pager - (559) 488-8358 / Fax - (559) 459-6025 [EMAIL PROTECTED]
------------------------------------------------------- WARNING/CONFIDENTIAL: ------------------------------------------------------- This email, including attachments, may contain information that is privileged, confidential, and/or exempt from disclosure under applicable law (including, but not limited to, protected health information). It is not intended for transmission to, or receipt by, any unauthorized persons. If the reader of this message is not the intended recipient you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you believe this email was sent to you in error, do not read it. Reply to the sender informing them of the error and then destroy all copies and attachments of the message from your system. Thank you.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*= To subscribe or unsubscribe to the meditech-l, visit MTUsers.NET. To check the status of the meditech-l, visit MTUsers.NET. For help, email [EMAIL PROTECTED] Visit the MTUsers WikiPedia at MTUsers.NET/mwiki ______________________________________ meditech-l mailing list meditech-l@MTUsers.com http://mtusers.com/mailman/listinfo/meditech-l
