There's been some talk here about VOIP in various incarnations and
Panasonic switches. I thought I'd post our recent experiences with
integrating Skype. www.skype.com
Skype is, at it's heart, a PC to PC phone service not unlike some of the
IM voice calling services. But it's also more than that
A used KX-TD1232 can probably be had on Ebay for perhaps $ 300. I haven't
looked recently, but you'll probably find one or more on sale right now.
This is certainly less than the cost of repair or new replacement and would
solve the problem quickly.
Marc
[EMAIL PROTECTED]
- Original Messa
Ocassionally my TA824 does the same thing, but I have always blamed
the voice mail system operating in inband mode and taking a little
extra time to be notified that the ringing extension has been
answered. One extension rings one phone here after the call has been
directed via Auto Attendant.
[EMAIL PROTECTED] wrote:
>Try an old style 2500 style single line phone...I can't tell you why, but I
>bet it will be an improvement over the electronic SL phone.
>
>Kenny
>
>
The 500/2500 is really quite a design. It was the first and leading set
to compensate for a wide range of loop resi
Try an old style 2500 style single line phone...I can't tell you why, but I
bet it will be an improvement over the electronic SL phone.
Kenny
_
KX-T Mailing list --- http://kxthelp.com/
Subscription changes: http://kxthelp.com/mail
Hi,
I have a residential 824 system, 2 CO lines, and 15 analog 7735 series phones.
Several issues I can't figure out, hence "ask the experts"...
1. When the CO line rings and a peron lifts the receiver, it takes a long time
(one and half seconds at least) for the line LED to turn from red to gr
Hello,
I have an issue that I will like to share with you. I have established a
connection between a TDA100 and TDA30, through VoIP cards 484.
When a call from TDA100 is routed to TDA30 lets say from DISA and then
transferred back to TDA100, the system keeps 2 channels of VoIP open. The
One other thing
Have you ever had a 7030 series phones on a KXTD system? They work on
the KXTD's but no where near as good as the 74 series does. The new 76
series are made to go with the tda systems. It would be like owning a
race car and installing regular tires on it. You will never get to
At 10:32 AM 6/5/2006, Ross Lindahl wrote:
>One other thing
>Have you ever had a 7030 series phones on a KXTD system? They work on
>the KXTD's but no where near as good as the 74 series does. The new 76
>series are made to go with the tda systems. It would be like owning a
>race car and instal
At 04:56 AM 6/5/2006, N Deo wrote:
>The Telephone Instruments are in combination
>
> PANASONIC KX-TS500
> PANASONIC KX-T2371
>
> And the Work FINE if connected DIRECTLY to the TRUNK. Problem is
> when connected BEHIND the TD1232 and When using the TRUNK LINE.
> Intercom conversations are PE
One other thing
Have you ever had a 7030 series phones on a KXTD system? They work on
the KXTD's but no where near as good as the 74 series does. The new 76
series are made to go with the tda systems. It would be like owning a
race car and installing regular tires on it. You will never get
It sound like you had a power surge, then a failure. Initial damage is what
is immediately discernable. Then you have the effect of that stress on the
life expectancy on the circuit components. I would replace it, rather than
risk many callbacks and a peeved customer.
-Original Message-
At 07:36 AM 6/5/2006, Carl Navarro wrote:
>At 03:36 AM 6/5/2006, haceva wrote:
> >Hi
> >
> >Our company has TD816 pbx with KX-7433 phones. We want to change
> >our system, to TDA-200. Can we use thise phones with TDA pbx (like
> >not system phones)? Any experience?
>
>You can use them as system pho
At 03:36 AM 6/5/2006, haceva wrote:
>Hi
>
>Our company has TD816 pbx with KX-7433 phones. We want to change
>our system, to TDA-200. Can we use thise phones with TDA pbx (like
>not system phones)? Any experience?
You can use them as system phones. The power
draw is 4 times that of a 7600 series
Yes, 7433 phones wil work with proper power supply on the TDA.
Carmen
-Original Message-
From: haceva <[EMAIL PROTECTED]>
To: kxt@kxthelp.com
Sent: Mon, 5 Jun 2006 09:36:10 +0200 (CEST)
Subject: KX-T: KX-7433 phones
Hi
Our company has TD816 pbx with KX-7433 phones. We want to change
My opinion would be to go new TDA100 or 200 depending on the amount of old sets
you have. Repair would be expensive and not worth it, in my opinion. Also, the
client should look at the insurance policy. I had a client get a new system
with new phones, and it was all covered due to a power hit. B
Sounds like perhaps a phone (or two) are bad...how many sets are
dead/flashing? A short on the data pair (caused by a bad phone) will usually
affect 4 ports on the KSU. Unplug all dead/flashing sets, reset the KSU,
then plug them back in one by one. It's possible that there is a short in
the st
The Telephone Instruments are in combination
PANASONIC KX-TS500
PANASONIC KX-T2371
And the Work FINE if connected DIRECTLY to the TRUNK. Problem is when
connected BEHIND the TD1232 and When using the TRUNK LINE. Intercom
conversations are PERFECT.
Thats why I am totally confus
Hi
Our company has TD816 pbx with KX-7433 phones. We want to change
our system, to TDA-200. Can we use thise phones with TDA pbx (like
not system phones)? Any experience?
thanks
--
Tomozi Péter
http://tomozipeter.blogspot.com
http://tomozi.uw.hu
__
19 matches
Mail list logo
