compared to actually building it. As Brian puts it, the 2nd
KR will go much faster, of course, I need to finish my orginal one
first... :-)
Bob - I'm looking forward to your progress reports.
Dean Cooper
Jacksonville FL USA (moving to Tulsa OK in May '06)
Corvair powered KR2
Visit m
uldn't have them. Using two pieces of angle back to back
like Dennis mentioned will work fine as well. Good luck.
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See Corvair powered KR Project at
www.geocities.com/djramccoop1/KR2_Home.html
's that make the
Gathering. I want to personally thank you (longest distance winner) and the
rest of the KR Pilots who dodged weather to get to the gathering to show
them off. Thanks!
I hope to join you some day soon!
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
Corvair College in
November.
ps. The camper was much easier on my back than the ground was last year,
thanks for putting up with me!
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See my KR Project at http://www.geocities.com/djramccoop1/KR2_Home.html
upted by another Hurricane... I'm with Dan, let's move this thing
to October. Wishing everyone a safe travel to the Gathering. Hope to see
everyone on Friday.
ps. Sorry to hear about your wife, Joe. I wish her a speedy recovery. You
will be missed at the gathering.
Dean Cooper
Ja
assume you built a 'male' mold for the turtle deck vs. a female
mold. I would read about Scott Cable's turtle deck process before you start
at:
http://kr-builder.org/ScottCable/index.html
Good luck.
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
avoid having to worry about rust/corrosion as well as less
weight. Good luck.
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See Corvair powered KR Project at
www.geocities.com/djramccoop1/KR2_Home.html
Bill wrote:"
> Well, after a week of bad weather I finally got to go up and just fly
> around for an hour or so
Bill,
Are you flying behind the new "601" cowling, yet?
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See Corvair powered KR Project
Dan wrote:
>The WannaBee has come to life.
Congrats Dan and Jerry. This is a special moment and it won't be long now
till I hear that yehaaa all the way down here. Great job.
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See Corvair powered KR
amccoop1/Canopy.html
and the detail for my canopy hinges at:
http://www.geocities.com/djramccoop1/Canopy_Hinge.html
Hope all is well in KR land. I do believe we are in double digit days until
the Gathering. Hope to see everyone in Mt. Vernon!
Dean Cooper
Jacksonville, FL USA
Mark wrote:
> I did my "final" weight and balance Monday.
Mark,
Sounds like that first flight is getting close. Look forward to the first
flight report. Good luck!
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See my KR Project at http://www.
nly 3.6 hours... :-)
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See my KR Project at www.geocities.com/djramccoop1/KR2_Home.html
e any place that lists how much is in the bank and what props there
are available (if any)? Thanks again for facilitating this!
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See my KR Project at www.geocities.com/djramccoop1/KR2_Home.html
the billing date in which
the charge appeared. It should be pretty easy to resolve if the above is
true. I've worked the past 15 years in the credit card industry (don't
flame me... :-)
Contact me off-net if I can help.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.
t the gas struts installed (thanks
Mark L for the source) and they work like a charm. Also, I peeled the 20
year old protective film off of the canopy and it came off without any
trouble. Boy, having a canopy on the plane that you can see out of really
encourages those airplane noises!!!
Dean Coo
s well?
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
. Vernon is in southern Illinois about an hour or so out of St.
Louis. See the gathering website at http://www.krgathering.org/
See everyone at the gathering.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
be permanently listed on the KRnet
home page and be easily referenced when you send out reminder emails. Just
a thought...
Thanks for facilitating this, I know it will come in handy as I get closer
to flying!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project
Netters,
Does anyone have a flap handle assembly that they are not planning to use
and would like to sell? Please contact me off net at
dean_coo...@bellsouth.net
ps. I already asked Mark J.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at
nd it prompts you
where to save it. Very easy to use. I've been using it for over a year
with no problems, pop-ups, etc. Hope it helps.
http://www.cutepdf.com/Products/CutePDF/writer.asp
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at w
void damaging the canopy. It's extremely tedious as you go around the edge
of the canopy. Good luck.
ps. Post some pictures if you can.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
We've had the most beautiful January weather I can
remember; 10 days straight of 75 degree, clear-sky days. (Sorry Mark, I
hope you get her in the air soon!)
I welcome any comments. Hope all is well out in KR land...
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
Gavin wrote:
>Do the bolts holding the legs to the wing spar bracket require aluminium
back up plates
Gavin,
I bought my Diehl kit 12 months ago and it came with AN960 flat washers and
locknuts.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project
p would be
greatly appreciated!
Happy Holidays!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
the mounting plate). The engine mount supports attach 0.75" OC from the
end of the bracket tube and reach up to the lower engine attach points
(designed for a VW mount, although I'm sure it could be easily adapted to an
O200 mount). You can see pics on my site.
I hope that helps.
Dean C
done. Next up is the canopy (boy, with the
canopy frame clamped in place, it really starts looking like and airplane...
yeehaa). When I get a chance to stop building for a few hours, I'll update
my website and let you know. Hope everyone in the states had a good holiday
weekend.
Dean C
t 2 weeks of
Dec to work on the KR some more. Thanks again for the motivation!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
t's barely the edge of the
hole. Thoughts?
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
on the HS and
Carbon on the Elevator. Pictures to come...If anyone has the weight
data, I would appreciate it.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
ng out from the stick location, past the
gear bracket, to the lower WAF location. Good luck.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
st kidding.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
- Original Message -
From: "Brian Kraut"
To: "KRnet"
Sent: Thursday, October 21, 2004 8:15 AM
Subject: KR> Embarra
m the HS
angle of incidence rather than the airfoil, so I decided to keep the HS
stock and just add the balances. I'm certain others will disagree and
that's the beauty of this plane, build it your own way... :-)
ps. I'm still looking forward to seeing your KR sometime this Fall
Netters,
Anyone know where I can get a digital protractor? I've tried all of the
obvious places (Sears, Home Depot, Harbor Freight, Lowes, etc).
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
es. Thanks again.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
rib
template in place before shaping the rest of your stern post.
I hope this answers your question. good luck.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
how good it'll look when your done....
:-)
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
7;m sure it could be done on a KR, but why? If you wanted to put
the wing attach fittings at the fuselage on a KR, it would be best to go
with a one piece spring like the Grove gear that mounts inside the
slipstream.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR
As Dan put it, build it the way you want. If you built it this
way, it would definitly be interesting to see. Good luck.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
s.com/djramccoop1/HS.html
I still have foam and glass to do, but the woodwork is done... It's been
relatively quiet today, hope all is well out in KR land.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
ng in the order.
Brian and I think we'll use about 30-35 yards, so we're looking for 1-3
people to pick up the rest. Please email me off net at the address below by
Sunday night as I would like to make the decision on Monday whether to order
that quantity or get it elsewhere.
Dean Cooper
J
Steve wrote:
> Can you please pass on the suppliers contact details /web address
Here you go. http://www.advancedcompositetraders.com/ Steve is the guy
I've been dealing with.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djr
ple want to attend, they work around it. Concensus will be
very difficult to achieve with everyone's individual "social calendars"...
:-)
Thanks, again, for all of your hard work and commitment to the KR
Garthering!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@b
think this is what you were
looking for. Sorry for the quality of the scan (It's hard scanning from a
book). It's a pdf doc (adobe reader required), so you can save it to your
local machine once you pull it up. Good luck.
http://www.geocities.com/djramccoop1/Parts_List.pdf
Dean Cooper
Ja
Brian wrote:
> Now Dean Cooper and I are trying to get earlier flights back to
Jacksonville
> tomorrow before the hurricane hits there and we can't get back.
Well, Brian and I made it back home just in time (the airports are closed
tomorrow). We were really disappointed to have to le
This was just what came to mind.
I have not tested nor seen these in action (my disclaimer... :-)
Good Luck.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
athering withdrawals while trying to dodge Hurricane Jeanne...
I'm going to work on the KR all day tomorrow since the weather will be
terrible and my wife thought I was going to still be in Mt Vernon anyway...
:-)
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my
Dene wrote:
>Would this be acceptable, my scarf joints are all 1:20
Dene,
If the scarf joint is properly done, the joint will be stronger than the
plywood itself so it shouldn't be a problem. Good luck.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR pr
?
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
t your "adult beverage" slides in to make it look like a
"non-adult beverage"... :-) Of course, if there's a keg, we're going to
need a big coozie :-)
See everyone Thurs!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
Here is the brochure on it that he gave
me:
http://www.geocities.com/djramccoop1/NilFram_Brochure.pdf
Also, it sands and shapes identical to the polyurethane I got from Wicks. I
welcome any feedback on this.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
his KR was in
just 10 1/2 months ago when I drove out to see it! It just shows you how
quickly you can build these planes. Now, we just got get Bill to tell us
his secret at the gathering :-)
http://www.geocities.com/djramccoop1/Bill_Clapp_KR2S.html
Dean Cooper
Jacksonville, FL
Email me at
re anything I should be looking for or cautious of when buying this
from a non-aviation parts company? I looked through the archives and
couldn't find anything specific to this question. Thoughts?
See you in Mt. Vernon!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth
KRron wrote:
> Be aware or be square.
Thanks Ron. This is actually the "pink" foam. They carve it out to
insulate pipe with. I'll try to get a sample and bring it to the gathering
as Ray suggested. I would appreciate any additional comments in the mean
time. Tha
Orma wrote:
> I hope the KR net is up. I only see one post and that is
unusual...Tomorrow seems as good a day as any.
Orma,
It has been quite today. Hopefully, everyone is busy building. Good luck
on your flight tomorrow!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.
Does anyone have a
quick answer on their source? What about just using angle? Thoughts?
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
look
forward to seeing it in the air!
ps. It's good to hear from you Art. Brian mentioned that you moved out to
West GA, hope to see you at the gathering.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2
he fuselage... :-)
http://www.geocities.com/djramccoop1/Seat.html
See you at the gathering!! Mark J, how many days is it... :-)
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
airport like a kite? Maybe that's what
all the people were pointing at... :-) :-)
Nice work!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
(#4600) signed by Ken Rand on December
21, 1974 where Ken wrote "KR-2 #569" on the receipt. I assumed that was
the plans serial number.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
Dan,
Congrats on getting it painted!!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
- Original Message -
From: "Dan Heath"
To:
Sent: Monday, July 05, 2004 8:42 AM
Subject: KR> Fu
Sorry folks, that was meant just for Dan and I was too quick on the reply.
:-)
Do not archive
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
- Original Message -
From: "Dean Cooper"
Netters,
For those of you with kids, Happy Father's Day! Take them flying... :-)
ps. one day closer to the gathering...
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
Vinigar works excellent to clean up Aeropoxy as well.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
- Original Message -
From:
To: ""KRnet""
Sent: Wednesday, June 02, 2004 6:4
wouldn't hurt
either. Good luck.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
- Original Message -
From: "Phil Matheson"
To: "KRnet"
Sent: Friday, May 14, 2004 6:48 PM
S
axels. Hope this
helps. Good luck.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
- Original Message -
From: "Charles Buddy & Cheryl Midkiff"
To: "KRnet"
Sent: Thursday, May 13,
t it? Anyway, I agree with Dan and I'm
not sure you would ever need to remove the gear brackets. Just a thought...
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
Netters,
Does anyone know where I can get a thermostat to build a heat box? Ideally, I
would like to get one I could plug a small electric heater into and have it
control power to it. But, if anyone else has better ideas, I'm open to them.
Thoughts??
Dean Cooper
Jacksonville, FL
Ema
aritaville last night with
no luck...
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
the
same way, except it is connected to the stick instead of the rudder pedal.
Looks simple and easy to use. Robert actually used the adjustment knob from
a guitar, which was interesting, Hope this helps...
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project
Dan Wrote:
>then you will have to exercise a lot of restraint to stay on mission.
well put, Dan.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
Mark L,
I got my stickers today and they look great!! Thanks for doing it!
Do not archive
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
Mark wrote:
> KR-2 calls for one sideKR-2S calls for both sides.
One addition is the KR2 calls for 12" of skin on the forward side of the
main spar at the WAF's in addition to full skin on the aft side of the main
spar.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bell
Larry wrote:
>As for the head room, build your seat first and have someone measure the
>height you need while you set in the seat and built to that dimension.
Also, make sure you have your headset on when you measure... :-)
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsou
books, I was thinking about
this design:
http://www.geocities.com/djramccoop1/Aileron_Balance.html
But, didn't know how much extra weight it would require or what the offset
in less drag would be (in addition to the reduced risk of falling off :-)
Any thoughts on this design?
Dean Coope
to hear from anyone that can test
your idea with the solder to understand the weight difference. Thanks.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
Virg,
Here are the numbers for OK City:
FAA Aeromedical Division 405-954-4821
FAA Medical Appeals 405-954-7675
I hope this helps.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
- Original Message
Dana wrote:
> You win, see the rest of you on the flip side.
Dana,
I personally appreciate your contributions to the KRnet. I hope you will
continue to participate. I think we can all gain value from experience,
whether it be composite, sheetmetal or othewise. Thanks.
Dean Coo
t and will
give you better ground clearance and visibility for not any material
difference in speed (with wheel pants). The kits offered by Diehl or Grove
are simple enough to install.. Good Luck...
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR proje
ine goes through
the fuselage on each side that you can stick your fingers down in between
the seat and the fuselage side to switch it off in an emergency. I'm sure
there is a better idea out there, this was just my initial thought...
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellso
I wonder if the same would happen if you were already in a nose down
configuration as when your on final. I look forward to additional feedback
from Larry.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
Mark,
I found some on page 3472 of McMaster-Carr's online catalog
http://www.mcmaster.com/. (Part #9307K71).
It's made for a 1 1/16" hole so it should work.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop
I really like Chris' decal as well. Additionally, I came across this
bumper sticker that my Dad had from years ago when he started the KR.
http://www.geocities.com/djramccoop1/KR_Bumper_Sticker.GIF
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR proje
and not count on
the distribution of weight, etc. If I am understanding you correctly, then
I would not go that route, but I may not be following you. If you have
pictures, you can send them to me offnet and I will post them for you to
show everyone. Good luck.
Dean Cooper
Jacksonville, F
ve $5-10 to pay for the service you get on this
site. I hope we don't get to the point where we have to resort to charging
for a subscription to keep it up...
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2
er the weekend. I think I have a total of about 8 hours from the first
pilot hole to start cutting to clamping the spar after it had been epoxied.
Small price to pay for the increased performance...
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project a
an auto conversion (VW) engine...
This should not be taken to be an attack on the author, Just stating the
obvious (at least to me) :-)
ps. What about a prop strike which results in loss of power :-)
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
inted up the airfoil templates for
$11.37 with tax. Now it's on to cutting out the new ribs and re-securing the
aft spar to the fuselage. I have taken pictures through the process and will
post once it is complete. Happy building....
Dean Cooper
Jacksonville, FL
Email me a
?
KRnet, is there still interest? If not, I'll drop it...
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
slide on one
way and the friction prevents them from coming off. You could use one of
those over the shaft of the rivet on the inside of the fuselage without
having to pull the mandrel through distorting the rivet shaft. I think
they're only a few cents at Lowes, Home Depot, etc in th
lus shipping. Please email me off net at dean_coo...@bellsouth.net if
interested. Here is the link to see it:
http://www.geocities.com/djramccoop1/Tailwheel.html
ps. Mark L, My $20 will be sent through paypal in next couple of days when the
transfer of funds is finalized. Thanks for your support of th
wings that I got with mine did
not have the precise measurements, so I put a tape measure on it and it's
1.25" tubing and looks to be about 3/32 thick (0.09375"). I hope this
helps.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
Bernie wrote:
>In the KR2S supplementary drawings there is nothing shown for HS spars
Does this mean that the KR2 and KR2S HS spar dimensions are identical?
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@msn.com
See my KR project at: www.geocities.com/djramccoop1/KR2_Home.html
Congrats Larry! Thanks for sharing the news. Look forward to hearing about
your first flight!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@msn.com
See my KR project at: www.geocities.com/djramccoop1/KR2_Home.html
- Original Message -
From: larry flesner
To: KRnet
Phil wrote:
>I have increased my H/Stabilizer spars 12 inches, Some have told me to
>increase the spar size and strength, others say here is no need.
>Any advise would be welcomed
I would appreciate the advice as well.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@msn.com
f they were closed all week for the
holiday.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@msn.com
See my KR project at: www.geocities.com/djramccoop1/KR2_Home.html
elpful.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@msn.com
See my KR project at: www.geocities.com/djramccoop1/KR2_Home.html
- Original Message -
From: Jim irwin
To: Dean Cooper
Sent: Tuesday, November 11, 2003 4:59 PM
Subject: Re: KR>Price wicks A/C Spruce
To: Dean Cooper
Netters,
Thanks for all the colorful emails. :)
Clearly, the consensus is I need to get my weight down below at least 200 lbs
to ensure this is a 2 place A/C. I will make that my goal. I appreciate
everyone's responses. Some in particular were very informative.
Thanks.
Dean C
ifications should I consider (ie, larger stabilizers, etc)
to ensure this is a 2 place aircraft for my size? Obviously with a smaller
passenger...
- Should I heavily consider one engine over another?
- Any other ideas?
You can email me off net at dean_coo...@msn.com. Thanks.
Dean Cooper
Jacksonvil
one out on the curb on trash day
and start over....
Dean Cooper
Jacksonville, FL
See my KR project at: www.geocities.com/djramccoop1/KR2.html
- Original Message -
Loose a limb.
Empty weight (*) 520 lbs.
24 gal fuel wt 144 lbs.
Pilot weight 220 lbs.
Baggag
Netters,
Does anyone have any pictures of the dual stick assembly sold by RR that they
could point me to?
Dean Cooper
Jacksonville, FL
See my KR project at: www.geocities.com/djramccoop1/KR2.html
1 - 100 of 102 matches
Mail list logo
