this thank you in advance
On Tuesday, November 12, 2024 at 10:58:14 AM CST, Adam Deem via KRnet
wrote:
Stein Air has everything you need for electrical - wire, connectors,
components, tools, etc.
Adam
On Tue, Nov 12, 2024 at 11:43 AM Dean Choitz via KRnet
wrote:
can anyone tell me
can anyone tell me what kind of crimp on wire ends that have the wrap around
ends that crimp to the wire and to the insulation surrounding the wire and
where they can be purchased thank you
On Saturday, November 9, 2024 at 05:12:27 PM CST, Larry Flesner via KRnet
wrote:
On 11/9/20
I would be interested in the 180 mph one how big is it thanks dean choitz
785eight one zero 8319
Sent from my iPhone
> On Oct 20, 2022, at 9:19 PM, Craig Williams wrote:
>
> I have a bunch of leftover stuff if anyone needs it. No junk. All priced
> less than half of new
I would be interested in the radio and the encoders dean Choitz 7858108319
Sent from my iPhone
> On Oct 13, 2022, at 9:03 PM, Dean Choitz wrote:
>
> I would be interested in the radio and the transponder 7858108319 dean choitz
>
> Sent from my iPhone
>
>> On Oct 13
I would be interested in the radio and the transponder 7858108319 dean choitz
Sent from my iPhone
> On Oct 13, 2022, at 3:32 PM, Chad Robertson via KRnet
> wrote:
>
>
> I would be interested in the headset my phone number is 620-252-9050
> Chadrobertson2951@ Gmail. N6
i am using the 5.75 or 6 oz fiberglass how many layers do you or should you lay
up to make the engine cowling and do most finish the outer with deck cloth
thanks dean choitz
-Please see LIST RULES and KRnet info at http://www.krnet.org/info.html
-Change list
Stu’s last name is Robinson
Sent from my iPhone
> On Jun 18, 2021, at 3:42 PM, Bill Jacobs via KRnet
> wrote:
>
> Excellent response!Short, elegant and factual.Regards,Bill Jacobs Daytona
> Beach, Fl.
>
>On Friday, June 18, 2021, 04:32:46 PM EDT, Flesner
> wrote:
>
>
> KitPlanes
plain looks great like the military coloring how bright are the landing lights
and where did you get them thanks i deleated the e mail and name of person and
plane
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Ple
advice appreciated
thanks dean choitz
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krnet.org/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo
i have a type 2 volkswagen engine was going to use in my kr 2 am going the
o200a way am going to get the volkswagen to a new home. hapi case bosch starter
94 mm jugs pistons great plains dual plug heads i believe slick magneto 4216 rh
69 mm crank 52x46 almost constant speed warnke prop electroni
0200 engine without starter alternator can you change out rear case and install
both and are case's readily available if so thanks dean choitz
dscho...@yahoo.com
___
Search the KRnet Archives at https://www.mail-archive.com/krnet@list.krne
still looking for a 0200 if anybody has one then are willing to part with or
knows of one please let me know thanks dean choitz dscho...@yahoo.com or
7858108three one nine prefer a running engine if not most of the parts to
build one thanks
series engine has
electric start, alternator, and anything else one might need. would be
interested in one with up to 1500 hrs or run time on engine thanks dean choitz
can reach me at dscho...@yahoo.com or 7858108319 thanks
___
Search the KRnet Archives
hate to look to stupid but our local iron supplier has never heard of 4130
iron/steel need to order some material to make a longer mount for cg. question
cg 4 inches from leading edge to 14 from leading edge is that what most
builders are shooting for thanks dean choitz
using a volkswaken what material do most people use 5/8 .040? -3/4 .049 4130??
7265 when building engine mount plans say 5/8 .040 never see what material is
used? thanks dean choitz
blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px
#715FFA solid !important; padding-left:1ex !important; background-color:white
!important; } I found a project located near me here in Missouri and brought
it home this evening.
Complete except for canopy, manual, and cow
blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px
#715FFA solid !important; padding-left:1ex !important; background-color:white
!important; } I am a previous cozy mkiv builder that is looking to take over a
project.
Interested in a KR2S .
Thank you
Sent from Yahoo Mai
*Stefan Balatchev wrote:> I am considering using Oilite bushings for my
tail movable surfaces. Press fit seems out of the reach for me, so I would
try the following method, please let me know if somebody else tried that
and if yes, what was the *outcome
Having spent a number of years in a landing
Larry-
I believe the 2014 City was Chino, CA not Corona.
On Mon, Jun 20, 2016 at 4:04 PM, Larry Flesner via KRnet <
krnet at list.krnet.org> wrote:
>
>
> This is what I have so far. Can anyone add, correct, or have any earlier
> dates? If anyone has the "old newsletter" disk and wants to resea
i am planning on using a hapi engine what kind of problems do they have with?
the crank or prop hubs or spacer any advice appreciated thanks dean choitz
Has anyone ever tried to support the airplane under the stub wing and lift
up on it with the wings attached tail feathers completed get in the plane
engine on the firewall fuel empty fuel full that's the way I did it in the
radio control airplane days or would something break or poke a hole in the
What kind of steel what size and how thick are most engine mounts made out
of I'm planning on using a Volkswagen and move it to the head about 3 to 4
inches
What bolts do you use to fasten wing attach fittings to each other an3-5a
on tear and an6-7a or an6-6a only my guess
Can't seem to locate that part number At the super bright LED site. Just
may have to give them a phone call The canopy price was actually 820 not
860 I miss quoted that
Does 860.00 $ sound about right for a canopy that's from aircraft
windshield company or is there a better choice for the flatter dragonfly
What part number did you order and what kind of back do you need to hold
that light
Where have most of you that have bought the Dragonfly canopy got yours Todd
told me his as more of a bubble than a flat It looks like the flight would
be more room Any comments
Two other goldmines are Norton Sales and Luky's Hardware (formerly Joe
Factor Sales), both close proximity to Apex. Well worth a visit if you
have a chance
On Thu, Jul 17, 2014 at 10:45 AM, Paul Visk via KRnet
wrote:
> I found the place. It's called Apex Electronic. There in Sun Valley Ca.
> Her
Thinking about dragonfly canopy any difference between manufacturers todds
or several others.price quality shipping fit ext. Looks like the dragonfly
canopy has better side to side head set room.
would welcome suggestions for landing light lights possibly led
what bearing end are most kr builders using on ailerons heim aurora hfe ect.
are most builders using plans for elevator, rudder hinges or are they doubling
up on hinges. wing question i believe wings for my project are the rf48 airfoil
was considering
stripped and
start over at side of fuselage. you cant use existing stub wings and fit to
5046 wing yes no?thanks Dean Choitz
I need to get aileron pushrods and rod ends,does any place sell a kit or do you
order elerything separtly. what are most kr2s using thanks Dean Choitz
7858108319
Dean Choitz. dscho...@yahoo.com
Hi Mike-
I am interested in your project. What are you asking for the package? Are
willing separate and sell in lots? Can you send pics? Im building KR2-S
in LA area.
Regards,
Dean Meloni
On Sat, Nov 3, 2012 at 6:17 AM, M Blank wrote:
>
> Because of changes in my mission as a pilot
from Dean Choitz thanks for aluminum tank information. where did you get your
5ply plywood tank fill sealers also do you think sealer is compatible with auto
fuel sending unit tubing fittings ect thanks. The last news letter i recieved
was 299 found 300 and 301 in my spam have not received any
Sorry, should have read more carefully. Do you know the history of the
mount at all?
On Thu, Jun 21, 2012 at 1:52 PM, Dean Meloni wrote:
> Hi Charles-
>
> I am interested in the 0-200 Mount. Did you fab this or was it a purchase?
> How Much are you asking, and can you send a
Hi Charles-
I am interested in the 0-200 Mount. Did you fab this or was it a purchase?
How Much are you asking, and can you send a photo or two?
Regards,
Dean Meloni
On Thu, Jun 21, 2012 at 1:44 PM, Charles Babb wrote:
> If anyone is interested I have an O200 mount complete with a nose g
Eduardo-
I have followed your project for more than two years. Beautiful work. You
are an artist! Congratulations!
Salud,
Dean Meloni
On Wed, May 23, 2012 at 2:20 PM, Eduardo Barros wrote:
> Thanks, Stef
>
> Very nice your project, and thanks you all for the congratulations
&g
Does anybody have contact information for Les?
compared to actually building it. As Brian puts it, the 2nd
KR will go much faster, of course, I need to finish my orginal one
first... :-)
Bob - I'm looking forward to your progress reports.
Dean Cooper
Jacksonville FL USA (moving to Tulsa OK in May '06)
Corvair powered KR2
Visit m
Steven wrote:
> I am looking for a piece of T stock for use in the Dr. Dean hinge control
> horn
Steven,
I searched for months to try and find some and couldn't (in any reasonable
length to ship). If it weren't for Brian making us some on his milling
machine, I still wo
's that make the
Gathering. I want to personally thank you (longest distance winner) and the
rest of the KR Pilots who dodged weather to get to the gathering to show
them off. Thanks!
I hope to join you some day soon!
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
Corvair College in
November.
ps. The camper was much easier on my back than the ground was last year,
thanks for putting up with me!
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See my KR Project at http://www.geocities.com/djramccoop1/KR2_Home.html
upted by another Hurricane... I'm with Dan, let's move this thing
to October. Wishing everyone a safe travel to the Gathering. Hope to see
everyone on Friday.
ps. Sorry to hear about your wife, Joe. I wish her a speedy recovery. You
will be missed at the gathering.
Dean Cooper
Ja
assume you built a 'male' mold for the turtle deck vs. a female
mold. I would read about Scott Cable's turtle deck process before you start
at:
http://kr-builder.org/ScottCable/index.html
Good luck.
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
avoid having to worry about rust/corrosion as well as less
weight. Good luck.
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See Corvair powered KR Project at
www.geocities.com/djramccoop1/KR2_Home.html
Bill wrote:"
> Well, after a week of bad weather I finally got to go up and just fly
> around for an hour or so
Bill,
Are you flying behind the new "601" cowling, yet?
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See Corvair powered KR Project
Dan wrote:
>The WannaBee has come to life.
Congrats Dan and Jerry. This is a special moment and it won't be long now
till I hear that yehaaa all the way down here. Great job.
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See Corvair powered KR
amccoop1/Canopy.html
and the detail for my canopy hinges at:
http://www.geocities.com/djramccoop1/Canopy_Hinge.html
Hope all is well in KR land. I do believe we are in double digit days until
the Gathering. Hope to see everyone in Mt. Vernon!
Dean Cooper
Jacksonville, FL USA
Mark wrote:
> I did my "final" weight and balance Monday.
Mark,
Sounds like that first flight is getting close. Look forward to the first
flight report. Good luck!
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See my KR Project at http://www.
nly 3.6 hours... :-)
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See my KR Project at www.geocities.com/djramccoop1/KR2_Home.html
e any place that lists how much is in the bank and what props there
are available (if any)? Thanks again for facilitating this!
Dean Cooper
Jacksonville, FL USA
Email me at dean_coo...@bellsouth.net
See my KR Project at www.geocities.com/djramccoop1/KR2_Home.html
the billing date in which
the charge appeared. It should be pretty easy to resolve if the above is
true. I've worked the past 15 years in the credit card industry (don't
flame me... :-)
Contact me off-net if I can help.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.
t the gas struts installed (thanks
Mark L for the source) and they work like a charm. Also, I peeled the 20
year old protective film off of the canopy and it came off without any
trouble. Boy, having a canopy on the plane that you can see out of really
encourages those airplane noises!!!
Dean Coo
s well?
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
. Vernon is in southern Illinois about an hour or so out of St.
Louis. See the gathering website at http://www.krgathering.org/
See everyone at the gathering.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
be permanently listed on the KRnet
home page and be easily referenced when you send out reminder emails. Just
a thought...
Thanks for facilitating this, I know it will come in handy as I get closer
to flying!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project
Netters,
Does anyone have a flap handle assembly that they are not planning to use
and would like to sell? Please contact me off net at
dean_coo...@bellsouth.net
ps. I already asked Mark J.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at
nd it prompts you
where to save it. Very easy to use. I've been using it for over a year
with no problems, pop-ups, etc. Hope it helps.
http://www.cutepdf.com/Products/CutePDF/writer.asp
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at w
void damaging the canopy. It's extremely tedious as you go around the edge
of the canopy. Good luck.
ps. Post some pictures if you can.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
We've had the most beautiful January weather I can
remember; 10 days straight of 75 degree, clear-sky days. (Sorry Mark, I
hope you get her in the air soon!)
I welcome any comments. Hope all is well out in KR land...
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
Gavin wrote:
>Do the bolts holding the legs to the wing spar bracket require aluminium
back up plates
Gavin,
I bought my Diehl kit 12 months ago and it came with AN960 flat washers and
locknuts.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project
p would be
greatly appreciated!
Happy Holidays!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
the mounting plate). The engine mount supports attach 0.75" OC from the
end of the bracket tube and reach up to the lower engine attach points
(designed for a VW mount, although I'm sure it could be easily adapted to an
O200 mount). You can see pics on my site.
I hope that helps.
Dean C
done. Next up is the canopy (boy, with the
canopy frame clamped in place, it really starts looking like and airplane...
yeehaa). When I get a chance to stop building for a few hours, I'll update
my website and let you know. Hope everyone in the states had a good holiday
weekend.
Dean C
t 2 weeks of
Dec to work on the KR some more. Thanks again for the motivation!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
Netters,
I'm finishing up my elevator with Dr. Dean REB hinges. What did others do
to finish the holes where the hinges enter the leading edge of the elevator,
if anything? Do I need to flox the sides or anything? You can't see the
holes except with max travel extended, and then i
on the HS and
Carbon on the Elevator. Pictures to come...If anyone has the weight
data, I would appreciate it.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
ng out from the stick location, past the
gear bracket, to the lower WAF location. Good luck.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
st kidding.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
- Original Message -
From: "Brian Kraut"
To: "KRnet"
Sent: Thursday, October 21, 2004 8:15 AM
Subject: KR> Embarra
m the HS
angle of incidence rather than the airfoil, so I decided to keep the HS
stock and just add the balances. I'm certain others will disagree and
that's the beauty of this plane, build it your own way... :-)
ps. I'm still looking forward to seeing your KR sometime this Fall
Netters,
Anyone know where I can get a digital protractor? I've tried all of the
obvious places (Sears, Home Depot, Harbor Freight, Lowes, etc).
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
es. Thanks again.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
rib
template in place before shaping the rest of your stern post.
I hope this answers your question. good luck.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
how good it'll look when your done....
:-)
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
7;m sure it could be done on a KR, but why? If you wanted to put
the wing attach fittings at the fuselage on a KR, it would be best to go
with a one piece spring like the Grove gear that mounts inside the
slipstream.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR
Doug wrote:
> The best reason I can think of Dean is that by doing it that way the
> builder would be able to go with one piece laminated spars and eliminate
the
> WAF's altogether.
Doug,
I agree, a one piece wing (or two piece bolting in the middle) is defintiely
an option.
s.com/djramccoop1/HS.html
I still have foam and glass to do, but the woodwork is done... It's been
relatively quiet today, hope all is well out in KR land.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
ng in the order.
Brian and I think we'll use about 30-35 yards, so we're looking for 1-3
people to pick up the rest. Please email me off net at the address below by
Sunday night as I would like to make the decision on Monday whether to order
that quantity or get it elsewhere.
Dean Cooper
J
Steve wrote:
> Can you please pass on the suppliers contact details /web address
Here you go. http://www.advancedcompositetraders.com/ Steve is the guy
I've been dealing with.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djr
ple want to attend, they work around it. Concensus will be
very difficult to achieve with everyone's individual "social calendars"...
:-)
Thanks, again, for all of your hard work and commitment to the KR
Garthering!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@b
think this is what you were
looking for. Sorry for the quality of the scan (It's hard scanning from a
book). It's a pdf doc (adobe reader required), so you can save it to your
local machine once you pull it up. Good luck.
http://www.geocities.com/djramccoop1/Parts_List.pdf
Dean Cooper
Ja
Brian wrote:
> Now Dean Cooper and I are trying to get earlier flights back to
Jacksonville
> tomorrow before the hurricane hits there and we can't get back.
Well, Brian and I made it back home just in time (the airports are closed
tomorrow). We were really disappointed to have to le
This was just what came to mind.
I have not tested nor seen these in action (my disclaimer... :-)
Good Luck.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
athering withdrawals while trying to dodge Hurricane Jeanne...
I'm going to work on the KR all day tomorrow since the weather will be
terrible and my wife thought I was going to still be in Mt Vernon anyway...
:-)
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my
Dene wrote:
>Would this be acceptable, my scarf joints are all 1:20
Dene,
If the scarf joint is properly done, the joint will be stronger than the
plywood itself so it shouldn't be a problem. Good luck.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR pr
?
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
t your "adult beverage" slides in to make it look like a
"non-adult beverage"... :-) Of course, if there's a keg, we're going to
need a big coozie :-)
See everyone Thurs!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
Here is the brochure on it that he gave
me:
http://www.geocities.com/djramccoop1/NilFram_Brochure.pdf
Also, it sands and shapes identical to the polyurethane I got from Wicks. I
welcome any feedback on this.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
his KR was in
just 10 1/2 months ago when I drove out to see it! It just shows you how
quickly you can build these planes. Now, we just got get Bill to tell us
his secret at the gathering :-)
http://www.geocities.com/djramccoop1/Bill_Clapp_KR2S.html
Dean Cooper
Jacksonville, FL
Email me at
re anything I should be looking for or cautious of when buying this
from a non-aviation parts company? I looked through the archives and
couldn't find anything specific to this question. Thoughts?
See you in Mt. Vernon!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth
KRron wrote:
> Be aware or be square.
Thanks Ron. This is actually the "pink" foam. They carve it out to
insulate pipe with. I'll try to get a sample and bring it to the gathering
as Ray suggested. I would appreciate any additional comments in the mean
time. Tha
Orma wrote:
> I hope the KR net is up. I only see one post and that is
unusual...Tomorrow seems as good a day as any.
Orma,
It has been quite today. Hopefully, everyone is busy building. Good luck
on your flight tomorrow!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.
Netters,
I'm going to use the Dr. Dean Hinge system and am trying to locate the T
shaped aluminum to use for the control horn. It's not in Wick's or AS&S
Catalogs and I spent an hour trying to find it in the KRNet archives
(although I may not have used the right key words).
look
forward to seeing it in the air!
ps. It's good to hear from you Art. Brian mentioned that you moved out to
West GA, hope to see you at the gathering.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2
he fuselage... :-)
http://www.geocities.com/djramccoop1/Seat.html
See you at the gathering!! Mark J, how many days is it... :-)
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
airport like a kite? Maybe that's what
all the people were pointing at... :-) :-)
Nice work!
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
(#4600) signed by Ken Rand on December
21, 1974 where Ken wrote "KR-2 #569" on the receipt. I assumed that was
the plans serial number.
Dean Cooper
Jacksonville, FL
Email me at dean_coo...@bellsouth.net
See my KR project at www.geocities.com/djramccoop1/KR2_Home.html
1 - 100 of 145 matches
Mail list logo
