Re: Stus-List Cool change and Oregon Offshore Race

Well Frank's predictions of conditions were more or less right on. I crewed on Gary Bruner's Yankee 30 and it was challenging. We raced conservatively And three of us helmed in short stints. The seas were confused and good sized. Keeping the boat tracking was quite a physical affair because of the

Re: Stus-List Oregon Offshore Race

Yes they did and they are doing the Trans-Pac double handed. The third place finisher was another Santa Cruz 27 "Kokopelli". Koko's race included a trip up the mast by one of their woman crew members to free a wrapped chute. I can assure you, this would not have been high on my list things to do w

Stus-List Interior Wood Conditioning?

I was hoping to tap the collective wisdom for suggestions on conditioning matte finish interior bulk heads, cabinets, etc. I am hoping for a "rub it on and done" solution. It doesn't need to last forever as long as it doesn't take forever. I have been using Murphy's oil soap disposable cleaning wip

Stus-List Anybody in Gloucester, MA?

Visiting family in Gloucester this weekend. Just curious if anybody from the list is nearby and wanted to show off their C&C to my wife and I this weekend. We head back to Portland, Or Monday night. Of course, happy to reciprocate on the west coast! Best, Kevin Osprey C&C 30 Mk II Sent from a m

Re: Stus-List Distance to maneuver to exit and enter slip

We have our 30mkII in a 28' slip and a 35' (max) fairway. We have a bit of Columbia River Current and some wind from time to time. I haven't had any issues, but we are on our boat all the time and our C&C (as most) will turn on a dime. That said, when I make the turn my stern is within inches of th

Stus-List C&C 30 mkII preventers

Looking for pictures / drawings for preventer set up on a 30-2. Advice from others would be valuable too, but especially helpful from fellow 30-2 folks. Thanks! Kevin Portland 30-2 -- Kevin Driscoll Portland, Oregon 503 // 875 // 3493 ___ This

Stus-List Jib sheet bowlines hang up on baby stay

I find that my jib sheet bowlines get hung up on my stay quite a bit, especially with my 130 on. Any suggestions? Thanks, Kevin 30-2 Sent from a mobile device. ___ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To cha

cnc-list@cnc-list.com

For late 80’s C&C’s does anyone have advice or a source for sink gaskets at the drains? The draines are the grey plastic “Hockey Puck” looking ones. Thanks! Thanks for the advice on the jib sheets. We are taking a trip up to Victoria / Gulf Islands / San Juan’s from our berth in Portland, Orego

Stus-List Winch for sale?

Looking to replace my barient 18 (6.7:1, 24:1) cabin top with a self tailer. Of similar power ratio. Does anyone have one they would like to sell? Sent from a mobile device. ___ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-l

Stus-List Crab pot free / tow lane - Columbia River to Victoria

Does anyone have coordinates our a good source for the crab pot free zone on the Oregon coast ? My wife and I are heading up to Victoria and Canadian Gulf Islands on the 4th of July for a few weeks on our 30-2. I would like to follow the land up the coast weather/wind permitting. Anybody on this l

Re: Stus-List Crab pot free / tow lane - Columbia River to Victoria

That is "lane" up the coast... I have a Yanmar question as well but I will post separately. Sent from my Tablet On Jun 26, 2014 9:57 PM, "Kevin Driscoll via CnC-List" < cnc-list@cnc-list.com> wrote: > Does anyone have coordinates our a good source for the crab pot fr

Stus-List Yanmar 2GM20 Starter Not Starting / Engaging

Hi Everybody, My starter is beginning to misbehave a bit. Looking for help diagnosing issue. *Symptom: *Occasionally (with more frequency now) I will press the starter button on my Yanmar 2GM20 and nothing happens. No, turning over, etc. Just crickets. Then I take my finger off and try it aga

Re: Stus-List Yanmar 2GM20 Starter Not Starting / Engaging

; over without problem then it is almost certainly not the starter or power > to it. Now you can focus on the starter button, button wiring and relay. > > Good luck, > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > On Jun 27, 2014 11:40 AM, "Kevin D

Re: Stus-List AH 4000 Questions

I have the same Auto Obsolescence 4000 auto pilot. Thankfully it still works like a charm* (though it comes in the cabin when not actively in use). *We will see if it is still charming after our trip over the Columbia Bar and up the coast to Victoria, BC on Friday... KD Kevin Driscoll Portland

Stus-List Charging problems 30-2 Yanmar 2 gm 20

On our anniversary sail up to Victoria, we pulled in to Gray's harbour, Wa last night because the batteries are not charging. Looking for suggestions of diagnosis / solutions. See below: thanks The alternator belt was somewhat loose but I tightened it and no luck on charging. Tested terminals on b

Re: Stus-List Charging problems 30-2 Yanmar 2 gm 20

? > > > > Joe Della Barba > > j...@dellabarba.com > > *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Kevin > Driscoll via CnC-List > *Sent:* Saturday, July 05, 2014 12:04 PM > *To:* C&C List > *Subject:* Stus-List Charging problem

Re: Stus-List Charging problems 30-2 Yanmar 2 gm 20

r can cause a blown alternator on some systems. The key > disrupts the regulating signal and the alternator goes to max output. > > Let us know what you find. > > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > On Jul 5, 2014 12:05 PM, "Kevin Driscoll v

Stus-List Input on Ipad installations @ Helm

I am looking for pics / descriptions of IPad installations at the helm, including USB/Charging if you have them. No need to get into “chart plotters are better” discussion. I would probably agree, but the expense is not justified at moment. Thanks for the input. Will send pics / blog posts from o

Re: Stus-List 3/4 ton rehab

Would like to hear how the rustoleum works out. Sent from a mobile device. On Aug 1, 2014 8:08 AM, "Della Barba, Joe via CnC-List" < cnc-list@cnc-list.com> wrote: > We used to race against a ¾ ton special painted black called 007. > Boat-for-boat we were as close to dead-even as could be but we

Re: Stus-List Anchor locker latch for C&C 30-2

Mike it's a perko latch. I have an extra that I am about to install but I will get model number for you. My old one I am taking off is serviceable just stiff. I haven't tried lubing it yet we've had another on osprey so thought I would use it. I am at the v marina tonight. Will try to remember to l

Stus-List Re-Bedding / Filling & Drilling w_Epoxy

Happy weekend all, I am going to start re-bedding some hardware on our boat. I’m going with butyl tape, but wanted to see what folks were using for “filling and drilling” holes in the deck/core with epoxy, etc. Is *Git Rot* appropriate for this job? I am looking for something easy to work with f

Re: Stus-List Re-Bedding / Filling & Drilling w_Epoxy

done is made sure to remove any amine blush before applying > sealant...time will tell. > > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > On Aug 8, 2014 11:42 AM, "Kevin Driscoll via CnC-List" < > cnc-list@cnc-list.com> wrote: > >>

Re: Stus-List Winches for sale

Joel, own interested. Can you send pics? Thanks! On Tue, Sep 29, 2015, 7:17 AM Joel Aronson via CnC-List < cnc-list@cnc-list.com> wrote: > These came off a friend's Sabre 28: > > (2) Barlow Self-Tailing winches (Model 23)- $350 each - great shape, > covered most of their life. Chrome over brass.

Re: Stus-List Dodger for 34+

Here is a different approach, ie. DIY hard dodger. It is very intriguing to me as the stitches begin to dissolve on our dodger though I would prefer to use an FRP panel over Starboard... http://www.bwsailing.com/bw/cruising-news/roger-dodger/ btw @ James Delaney, the picture of that outboard powe

Re: Stus-List Fitting a Solent stay

Saw this this morning... http://www.practical-sailor.com/blog/The-DIY-Solent-Stay-or-Inner-Forestay-11840-1.html?ET=practicalsailor:e30620:652553a:&st=email&s=p_waypoints101415 On Wed, Oct 14, 2015 at 3:36 PM corralmaduzi via CnC-List < cnc-list@cnc-list.com> wrote: > Hi there sailors, > I've eve

Re: Stus-List Hydrolocked!

Here is an article from Sail Magazine just this week about fixing their hydrolock. Not incredibly detailed, but optimist

Re: Stus-List Painting Boat Name on Hull

A local sign maker made our lettering for ~$20. Looks great after many seasons. Try someone outside of marine industry. On Thu, Oct 22, 2015 at 10:33 AM Josh Muckley via CnC-List < cnc-list@cnc-list.com> wrote: > Edd, > > You'll probably find that the vinyl will last longer than paint and be > ea

Re: Stus-List Signal K interface

Most wifi routers are 12v. Just cut off the 110v power brick. Did this on our router/boat. Works the same. On Wed, Oct 28, 2015 at 1:39 PM Graham Collins via CnC-List < cnc-list@cnc-list.com> wrote: > You didn't get in early enough, I got in line for $179. :-) > Now I need a 12v WiFi router. > >

Re: Stus-List Bermuda1-2 lessons learned

I've seen some IMOCA 60's (or similar) racing sleds run a vent line up a lifeline stanchion to top lifeline. Seemed like a decent solution. On Wed, Oct 28, 2015 at 2:30 PM Della Barba, Joe via CnC-List < cnc-list@cnc-list.com> wrote: > We never had fuel or engine issues even in very bad weather g

Re: Stus-List smart phones

+1 for Dwight's sentiment. Let's just be honest, Stu's list is painful to search or recall useful, older info/discussions, so let's not bother folks who are active on the list and keep it alive with their input, about subject line protocol that isn't worth salt anyway. Whining from the west coast

Re: Stus-List Changing oil filter Yanmar 3gmf

I asked this same question about two years ago and tried both techniques. I found for myself that stuffing an absorbent pad around the filter was the best and least messy solution. I tried the bag trick twice but it actually made more of a mess because you just can't twist the filter very fast with

Re: Stus-List plumbing problem

Qest fittings. I had to order my replacement online. Couldn't find them locally. On Sat, Oct 31, 2015, 6:09 AM Robert Boyer via CnC-List < cnc-list@cnc-list.com> wrote: > They look like Qest fittings--nothing special. Available at True Vale > Hardware... > > Sent from my iPhone, Bob Boyer > > On

Re: Stus-List C&C lister in Cuba Race

Interesting to see how the 34+ corrected against much larger boats. Also interesting that nearly every boat is a cruising boat. Would have suspected more than just a couple of performance oriented boats. On Sat, Oct 31, 2015, 3:26 PM Dennis C. via CnC-List wrote: > The Pensacola to Havana Race s

Re: Stus-List C&C lister in Cuba Race

I was just talking about the entry list, but will keep that in mind when looking at tracker. Would be very cool to finish a face in Cuba! On Sat, Oct 31, 2015, 8:09 PM Dennis C. wrote: > Be careful when looking at the tracker data. Click on the individual boat > and see when the last update is.

Stus-List Volvo Ardic Heater Help

My heater/furnace is working, but runs quite rich. There is very little info online that I can find. I've opened up the heater, but there was no apparent way that I saw to dial back the fuel delivery. Has anybody experience with this heater or can intuit what could be causing this heater to run ric

Re: Stus-List Bad Build

Obviously something went very wrong with Polina Star, but I did find Charles Doane's take on it more than speculative and a bit of irresponsible yachting journalism IMO. I will be interested to see the findings of fact when they are available. Glad we have C&C's. They can do no wrong ;) On Fri, D

Re: Stus-List Venetian parade

We do Christmas ships every year and usually go out about 5 nights per season. I have a cheapish 500 watt (peak) Stanley inverter wired directly to one of my house battery's with a flat wire plug and about a 18" lead with an inline fuse of course. We run all LEDs. On our 30-2 we run lights up the m

Re: Stus-List Folding prop for 30-1 with A4

My (Feathering, not folding) Max Prop 2 blade is excellent in reverse as well. Of course, you should look at the oft cited Practical Sailor report on folding and feathering props for more objective opinions. Should be easy to find Kevin 30-2 PDX On Tue, Dec 22, 2015 at 9:32 AM Michael Brown via

Re: Stus-List Source for Sturgeron?

I ordered some through canadadrugsonline.com last week to prep my kit for Pacific Cup in July. 25mg...so I will have to see how it affects me. I've used Scopalamine patches and they work, but I am not in love with them and if it's really rough, I still get woozy doing anything below. $29 for the 10

Re: Stus-List 93 37+ for sale cheap!

There is a very nice "Nina" in Portland with a white hull. Owned by Kimberly and Jeff Duvall. They bought her about 2-3 yrs ago? On Wed, Jan 20, 2016 at 11:59 AM David Donnelly via CnC-List < cnc-list@cnc-list.com> wrote: > No it was not Nina. The listing broker could not pronounce the Irish name

Re: Stus-List Diesel Heaters and installation

http://www.goodoldboat.com/pdfs/GOB86HotWater.pdf On Sat, Feb 6, 2016 at 10:25 AM Graham Collins via CnC-List < cnc-list@cnc-list.com> wrote: > Hey! That's me!!! :-) > > Graham Collins > Secret Plans > C&C 35-III #11 > > On 2016-02-06 11:58 AM, Ken Heaton via CnC-List wrote: > > One of our fell

Re: Stus-List Butyl tape

I tried another Butyl brand besides "Bed it" and I regret it. I have since used "Bed it". You can find it elsewhere than Mainesail and Hamilton, but I found price to be about the same. I went with Mainsail. On Tue, Feb 9, 2016 at 8:22 AM Bill Bina - gmail via CnC-List < cnc-list@cnc-list.com> wrot

Re: Stus-List Diesel Heaters and installation

That vent looks like a wicked line snagger! On Mon, Feb 8, 2016 at 10:32 AM Stevan Plavsa via CnC-List < cnc-list@cnc-list.com> wrote: > Electric fuel pump switch. > Brilliant! > > Thanks Joe! > I've decided on the Newport Diesel bulkhead job. It's going to end up > looking something like this (t

Re: Stus-List Soft shackle

We use them on the J42 I crew on and they work great. I recently made one with help from a friend and it was somewhat easy. We have a cow hitch on Osprey with our Endura braid single line/sheet, but I would like to splice an eye and use soft shackles. After that cow hitch is set it is a pain to ope

Re: Stus-List Sale alert automatic inflatable harness

I bought the one West Marine is selling last year during a similar sale. I returned it. Problem was the waist belt would not stay tight or in same position. I would tighten, 5 minutes later it was loose... If I ended up in the water, it would have immediately ridden up and limited my mobility and e

Stus-List Blakely Rock Sat 3/5 - Center Sound Series (Greater Seattle)

I am headed up to Seattle to crew for the Blakely Rock Race Saturday 3/5. Anybody on the list racing? http://www.cycseattle.org/event/center-sound-series-1-blakely-rock/ ___ Email address: CnC-List@cnc-list.com To change your list preferences, including

Re: Stus-List 37+ (or R or XL) Engine Access

Allen, I will grab a photo and dimensions of our hatch on our 30-2 this weekend when we are on the boat. Ours isn't a nice looking wood hatch, but it's the head and behind the door, and waterproof so it works fine for our needs. KD On Thu, Mar 17, 2016 at 7:26 AM Jim Reinardy via CnC-List < cnc-l

Re: Stus-List 37+ (or R or XL) Engine Access

On our 30 mkII we have an 8" screw access port in the port cabin for access. In the head we have an access hatch for dipstick etc. The hatch is much more preferable. Something similar to this. http://www.westmarine.com/buy/tempress--access-hatches-with-slam-or-cam-latches--P024_720_002_003 Couldn'

Re: Stus-List masthead sheaves

Just a thought, but why not splice some dyneema to a rope for your halyard? You could use same sheaves and have a halyard that is lighter, cheaper, corrosion free, etc. I am hoping to replace the last wire halyard on our boat like this when I get a chance On Fri, Mar 18, 2016, 5:56 AM mike amiraul

Re: Stus-List To foam or not to foam...

Not sure how a piece of line would keep a furled sail flat, as it should be. I see the wisdom of a foam luff. I regularly see furled sailed in highs winds with a big belly to them, exactly what you don't want cf course. If I were buying a new sail, I would definitely have a foam luff or plan on he

Re: Stus-List Rolly Tasker Sails

Definitely get a Cunningham so you can properly trim the main upwind in a breeze. I here you on price. That $1500 sounds very reasonable! On Fri, Mar 25, 2016, 6:44 PM Joel Aronson via CnC-List < cnc-list@cnc-list.com> wrote: > My 135 came from There. I am very pleased with it and would not hesit

Re: Stus-List jacklines for an LF 38

I am sure others will way in, but nylon webbing 6000# breaking strength is recommended by most racing bodies. Also, the strength will diminish in proportion to uv exposure, so we stow them when not on the boat. I run them to bow and stern cleats as others have mentioned since lack of backed pad eye

Re: Stus-List Jacklines on an LF 38

Agreed. Inside shrouds sounds like a recipe for more time on deck, clipping and unclipping at a time when it is best avoided. Being able to quickly clip on and run forward ( the windward side) to clear a fouled sheet etc, presents a far lower risk, in my mind, to life and gear than having to move m

Re: Stus-List friends from list

Do we have any idea about the *hard costs* for running this list? I've never seen a cost of operation breakdown. (Though it could be buried somewhere in the "archive") I personally would be more likely to donate if I knew the cost of this public forum, which is founded on the generosity of knowledg

Stus-List Restoring Grip to Winches

Any suggestions for restoring grip to old winches? Mainly I would like to rejuvenate my Barient 24's to grip my new line better. I am looking for the cheapest and easiest solution. I am not above adding texture with a dremel to the drum or the self tailer. What has been your experience? Thanks, K

Re: Stus-List Wheelpilot ST-4000 bracket...

Spencer, Judging from your email, you do not have the 4000 anymore? I still have mine and would love to buy any extras you may still have for the 4000. I do not need the bracket however. An upgraded pilot would be nice for our boat, but a baby is on the way (in 2 weeks) and I am hoping to upgrade

Re: Stus-List C&C in Sail Magazine

Looks anything but elegant or strong IMO. On Tue, Apr 7, 2015 at 1:28 PM Chuck S via CnC-List wrote: > The pole on the bow looks like a hinged sprit, stored in the upright > position, Dutch Botter style? > Doesn't look very strong. > > > Chuck > Resolute > 1990 C&C 34R > Broad Creek, Magothy R

Re: Stus-List Headlamps...

Had all kinds of headlamps for boating, backpacking etc. By far the most useful for on the boat at night standing watch and in camp at night is the Petzl Emergency headlamp. Super light, has red mode, long lasting batteries and NOT blindingly bright at night. I have had mine for going on 10yrs now

Re: Stus-List 30 Mkii

I echo Jim's statement. Aft berth is about a queen wide and plenty long, I am 6' as well. The inboard vertical clearance is low, but manageable for us. We are mid 30s and spend equivalent of several weeks aboard every summer. Vee berth is not as comfortable as aft beth. Kevin 30-2 On Sun, Apr 26,

Re: Stus-List Towing, Insurance, etc.

Our home insurance agent was happy to provide a rider on our boat. Pretty cheap too. Then we read the fine print "will not cover flooding." We didn't think that was ideal for a boat. As they say "Read the fine print." KD On Mon, May 18, 2015 at 9:32 AM Kim Brown via CnC-List < cnc-list@cnc-list.c

Re: Stus-List Grey Potable water connectors

Tom, replace the Qest fittings with more of the same and go sailing! Save your money and TIME for a different project IMO. Your boat is considerably newer than many on the list and you are bound to have more useful life in your Qest plumbing system. I just replaced my water heater as well and orde

Re: Stus-List Potable water fittings.

I have the same Gardenia 4 way manifold with the same labels on my 89 30-2. Must have come from the factory that way? On Thu, May 28, 2015 at 7:28 AM Mitchell's via CnC-List < cnc-list@cnc-list.com> wrote: > Josh, The valve on our 37+ was made by Gardenia and its a 4-1 if that > helps. (I convert

Re: Stus-List AirBnB boat

Airbnb is excellent. We occasionally host and travel using the site. There are amazing opportunities for unique experiences. https://www.airbnb.com/rooms/2079752?s=RhiO On Thu, May 28, 2015 at 12:51 PM Danny Haughey via CnC-List < cnc-list@cnc-list.com> wrote: > wow! $70 a night for that boat?

Re: Stus-List mast step redo on a 30-1

Please tell me that C&C / Rob Ball figured this whole mess out and took a lesson learned by the time the 30-2 came out. I am pretty sure my mast step looks nothing like this. I would rather go sailing than deal with this. On Tue, Jun 2, 2015, 7:09 PM Russ & Melody via CnC-List < cnc-list@cnc-list.

Re: Stus-List 37 and 34 +/XL/R cabin-side "plates"

The most accurate method would be to do a "rubbing" with crayon, i.e. like an elementary school gravestone rubbing, and scanned at full scale. The gentleman on the list with CAD/CAM capabilities could trace this in Adobe Illustrator or CAD and used as a base file for CAM. Just remember to get the d

Re: Stus-List 34+ transom thru-hulls

Assuming your boat sits on the lines it was designed for, those through hulls should be just above the waterline and I'd typical for the Rob Ball designs of late 80s early 90s. It will only be a couple of inches above WL but they were very smartly designed to remain so (at anchor) and they keep the

Re: Stus-List Emergency Tiller Bracket Squeaking

Jim, I do have a cover at my emergency tiller stock, but it doesn't keep the water out. I have not experienced the squeak at the stock so can't offer advice there. Is it possible to use something a bit heavier than McLube, but lighter than standard grease. Triflow or similar? Kevin 30-2 Osprey O

Re: Stus-List Strengthening Drop Leaf Table Supports

I have the same issue with my 30-2. In my case the piano hinges just split at the top. Need to reinforce as well so will be listening for advice. On Thu, Jun 18, 2015 at 6:26 AM Don Newman via CnC-List < cnc-list@cnc-list.com> wrote: > Is it possible that one side released putting all the load on

Re: Stus-List bolt cutters

I personally wouldn't want to be looking for pliers hammer etc during a dismasting and then trying to pull clevis pins in a pitching sea with the waves punching holes in the side of the boat with the mast. What ever is easiest and *fastest* is safest in a dismasting event is best IMO. On Thu, Jun

Re: Stus-List Bottom paint -ingredient change

Anybody dumping Roundup in to their bottom paint and the waters in which we sail should be taken out to the barn and shot. Dumping a witches brew of anti biotics into these same waters is similarly ignorant IMO. Complain about the EPA all you like, but someone needs to take on the unenviable task o

Re: Stus-List Vessel Documentation Fee

Jacking user fees is one of our US political party's trick so they can say they don't raise taxes. Look at what Romney did in Massachusetts when he was there. He raised nearly every fee in the books including gun fees, which I will admit surprised me! See here

cnc-list@cnc-list.com

Sounded like an A4, no? On Tue, Jul 21, 2015 at 3:45 PM S Thomas via CnC-List wrote: > I was wondering if we would hear from you on that one Bill. > It would be interesting to hear what the owner had to say about what > happened. > Precious little in the news reports. > He couldn't put the fire

cnc-list@cnc-list.com

ake. > There was nothing below on that boat but a bucket and a handful of pipe > berths. on second thought, it might have had a head with an actual door, > but that's it. > Don't think it's been sailed in 15 years. seems a shame to pollute the > lake with yet another wr

Re: Stus-List Pegathy's New England Voyage

Looks like a really nice trip. Did you have engine trouble? Wondering why you were "toe'in wit da dink" On Mon, Jul 27, 2015 at 10:07 AM Daniel Sheer via CnC-List < cnc-list@cnc-list.com> wrote: > June 5 - 28 2015 in an LF38. Baltimore to Nantucket and back. Log and > photos at > Pegathy_NE_Voyag

Re: Stus-List Stus list winches

+1 to using a NAIL-SET, -1 to using a PUNCH as was suggested elsewhere. I used a punch and the drums are abrading my new sheets quite quickly. Not yet sure how to address this... (they do hold like glue however) On Mon, Jul 27, 2015 at 11:25 AM Martin DeYoung via CnC-List < cnc-list@cnc-list.com>

Re: Stus-List 88 C&C 30 MKII Stiff (Now stuff)

While the other C&C 30mkII listers are tuned in, I am looking to replace my main soon and looking for a decent used one. If you have a back up that's not all blown out or you are thinking about replacing your current one soon, let me know...I am in the market. Thanks! Kevin On Mon, Aug 3, 2015 at

Re: Stus-List Electronics upgrade now Luddite Alert!

Pass through many bridges but the only thing that causes my autopilot to get crazy is when my cell phone is next to it. Curious about a handheld. Will try that. On Tue, Aug 11, 2015 at 9:10 AM D Harben via CnC-List wrote: > ... Argh yes! I carry a VHF/DSC/GPS and knife on me as I single hand...

Re: Stus-List Baby Stay on 30-2

I too would like to do something with my 30-2 baby stay. I actually saw a 30-1 near by with a 3 or 4 to 1 purchase with a cam cleat (like a traditional boom vang) for his baby stay. I very much like this idea in that it is a) removable and b) could be tension-ed for mid section mast bend in blowy c

Re: Stus-List Baby Stay on 30-2

C&C 37+ > Solomons, MD > On Aug 18, 2015 7:16 PM, "Joel Aronson via CnC-List" < > cnc-list@cnc-list.com> wrote: > >> Snap shackle on mine >> >> Joel >> >> On Tuesday, August 18, 2015, Kevin Driscoll via CnC-List < >> cnc-list

Re: Stus-List LED's for TRILIGHT?

I do not have a marine beam tricolor, but have ~5 or 6 other lights from them. They are not the cheapest, but I have been very happy with them, especially this one which we have throughout the cabin in our plastic reading lamps on our 89 30-2: http://store.marinebeam.com/red-white-switchable-led-fo

Re: Stus-List Stus List - 1983 38 Landfall on Ebay

But has a number of qualifiers, and does not show (or mention of course) the pulverized hull to deck joint and toe rail on the starboard side, nor the pulpit, etc. His terms would make it very difficult, if not impossible to arrange for a haul/inspection if you were the winning bidder. Even if he g

Re: Stus-List Stus List - 1983 38 Landfall on Ebay

Gone. Tried a number of different ways. Hopefully some romantic sailor out there doesn't get snookered. On Fri, Aug 21, 2015 at 10:58 AM Steve Sharkey via CnC-List < cnc-list@cnc-list.com> wrote: > It doesn’t come up for me either. Seems to be gone. > > *From:* S Thomas via CnC-List > *Sent:* F

Re: Stus-List Lighting - interior

How would they be in the cockpit locker? It says they won't light up in the day time. Are the recesses of my cockpit locker considered "daytime" at noon do you think? On Fri, Aug 28, 2015 at 8:13 AM svpegasu...@gmail.com wrote: > I like the size of those. I have been looking for battery powered

Re: Stus-List Salvage or great price?

Remember, it's nearly impossible to finance (in a conventional way) a boat that old. I imagine that is one of the biggest hurdles to selling a boat 20+ years old. On Mon, Aug 31, 2015 at 10:13 AM Joel Aronson via CnC-List < cnc-list@cnc-list.com> wrote: > Its hard to believe he can't sell it at t

Re: Stus-List Barient ST 32's

I am still looking for a Barient 18 self tailer or similar, if anyone knows of one. Kevin On Tue, Sep 8, 2015, 6:02 PM Paul Baker via CnC-List wrote: > I fitted them to my 24 and they worked fine, were a struggle to get on but > that meant they never slipped. > Cheers > Paul > > ---

Re: Stus-List Windows laptop for chartplotter?

+ 1 for MX Mariner. I have been using it on my 7" android tablet and Android Phone for 3 years in tights spots and up and down the Oregon + Wa Coasts and in the San Juans. I also have Navionics on both devices for redundancy and with have charts downloaded on both. These apps send me notification a

Re: Stus-List Windows laptop for chartplotter?

Which brings up another topic...anchor alarm apps for phone or tablet! There are many available and they do not use any power and do not need to be connected to cell service! (Though your plotter is probably fairly efficient Andrew) On Wed, Sep 9, 2015 at 10:01 AM Andrew Burton via CnC-List < cnc-

Re: Stus-List Harken roller furler failure

Oops, Intended for Frank, not spam for everyone else... On Thu, Sep 10, 2015 at 2:56 PM Kevin Driscoll wrote: > Frank, > > If Mark doesn't go for that MK I swivel, I would love to have it. I am in > Portland. We haven't met, but I race regularly on the J42 Velocity and > occasionally on other bo

Re: Stus-List Harken roller furler failure

Frank, If Mark doesn't go for that MK I swivel, I would love to have it. I am in Portland. We haven't met, but I race regularly on the J42 Velocity and occasionally on other boats. My wife and I also have a 30-2 "Osprey" at PYC. Thanks! Kevin On Thu, Sep 10, 2015 at 2:54 PM N7FN--- via CnC-List

Re: Stus-List - Inflable life jacket with harness recommendation

I have the Kong double tether and highty recommend. You won't find a cheaper/high quality 2x tether. (required for offshore racing). At a Safety at Sea Seminar I witnessed the Spinlock Deckvest Pro inflate with the antenna strobe and spray hood., I can tell you that this appears to be the gold stan

Re: Stus-List - Inflable life jacket with harness recommendation

My Kong tether has snap shackle for self eject. On Wed, Sep 16, 2015 at 11:53 AM Danny Haughey via CnC-List < cnc-list@cnc-list.com> wrote: > don't forget to sign up for the PYacht email list before you place your > order and they'll give a 5% off code on a purchase over $100 > > five bucks is fi

Re: Stus-List Interior Cushions

Definitely invest 6k into cushions for your 81 34' and be done with it;) On Wed, Sep 16, 2015, 5:26 PM svpegasu...@gmail.com wrote: > I did my cushions on an old boat myself. Had foam cut by the foam shop, > bought fabric from furniture repair shop. Layed everything out in family > room. Sewed i

Stus-List Sailing Totem - "(C&C's) Keels Falling Off!"

Does anyone know if there is any base to the assertion the Ms. Gifford makes in her Sailing Totem blog that “(C&C’s) keels are falling off!” http://www.sailfeed.com/2014/08/theres-this-boat-mary-powell/ Assuming not, could someone remind her that baseless assertions, distributed by her through v

Re: Stus-List Nothing Will Stick!

Fwiw I've tried sticking led puck lights in my lazarette on our 30-2 and couldn't get anything to stick there either. I just finally gave up and stuck the adhesive with super glue from our med kit. I also stuck one on the underside of our helm seat so that we can more easily connect our shore powe

Re: Stus-List Companionway hood

I ordered this stuff recently from Amazon. It's white so blends nIce with gel coat. I don't have link just this moment but yOu should find it easy enough. Incom RE20759 .75-Inch by 20-Foot Butyl Caulking Tape, White On September 10, 2014, at 1:20PM, Bill Coleman via CnC-List wrote: Unless your

Stus-List San Francisco sailing opportunities this weekend

My wife and I are in San Francisco for the weekend and wondered if anyone would be out on the water today Saturday or tomorrow Sunday. If you have room on deck our need a grinder we would be happy to get out on the water. Off course if you are traveling through Portland we would be happy to get

Re: Stus-List Backstay aduster

I second the split back with tackle/cam cleat apparatus suggestion. I race a bit with it and Find it straight forward and quick adjusting. Pretty direct feedback on rig tension. KD On October 8, 2014, at 1:13PM, John Pennie via CnC-List wrote: For a 33 you may want to consider one of the fitti

Stus-List Yanmar 2gm20 crush washers?

Anybody happen to know what copper crush washers to buy for Yanmar 2gm20? The banjo fittings on my secondary fuel filter is weeping. I'd prefer not to take it apart to find out since we are out on the boat so often. Like to have therm in hand before starting the replacement. There may be others

Stus-List Butyl Tape vs 4200: Front hatch Rebed

Butyl Tape or 4200? Lewmar hatch though not sure that matters. Thanks Kevin ___ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://

Re: Stus-List Ebola?

http://www.pbs.org/wgbh/pages/frontline/ebola-outbreak/ Boatless Yanni. Take a look at this brief documentary from Frontline. A government conspiracy? But I guess everything is... Let's stick to butyl and C&C fin keel conspiracies, which is perhaps, comprehendible for everybody on the list as Sa

  1   2   3   >