Thanks everybody. Great information as usual. KD
Kevin Driscoll Portland, Oregon 503 // 875 // 3493 On Fri, Aug 8, 2014 at 11:55 AM, Josh Muckley <muckl...@gmail.com> wrote: > This past winter, I pulled my sanitation pump out fitting and found some > significant rot. Dug it out and used Smiths clear penetrating epoxy to > seal and fix the open wood grain. They recommend rewetting frequently over > the course of a few days to a week. After it was curred I used west system > to wet out the hole then west + colliodal silica to fill the hole. > > Everything else pretty much according to PBase. I chose the Smith's > because I could mix small batches as needed and have NO waste. I bought > their syringe too and really couldn't be happier. Better price too. > > I'm suprised no one else mentioned this but one thing I probably should > have done is made sure to remove any amine blush before applying > sealant...time will tell. > > Josh Muckley > S/V Sea Hawk > 1989 C&C 37+ > Solomons, MD > On Aug 8, 2014 11:42 AM, "Kevin Driscoll via CnC-List" < > cnc-list@cnc-list.com> wrote: > >> Happy weekend all, >> >> >> >> I am going to start re-bedding some hardware on our boat. I’m going with >> butyl tape, but wanted to see what folks were using for “filling and >> drilling” holes in the deck/core with epoxy, etc. Is *Git Rot* >> appropriate for this job? I am looking for something easy to work with for >> when I have a spare hour or two, i.e. less mixing/disposing cleanup the >> better. >> >> >> >> Send suggestions and / or links to YouTube videos or other “How To” sites. >> >> >> >> Thanks, >> >> Kevin >> >> 30-2 >> >> PDX >> >> >> Kevin Driscoll >> Portland, Oregon >> 503 // 875 // 3493 >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> >> Email address: >> CnC-List@cnc-list.com >> To change your list preferences, including unsubscribing -- go bottom of >> page at: >> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com >> >> >>
_______________________________________________ This List is provided by the C&C Photo Album Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
