We do Christmas ships every year and usually go out about 5 nights per
season. I have a cheapish 500 watt (peak) Stanley inverter wired directly
to one of my house battery's with a flat wire plug and about a 18" lead
with an inline fuse of course. We run all LEDs. On our 30-2 we run lights
up the mast, zipped around the toe rail, and looped around the lifelines.
Total light length is 200'. I haven't added up the accumulated but suspect
I nave room for more. First year I used or cigarette lighter at the nav
station with no issues, but we've added lights and feel better about the
direct connection. Someone can shout me down about the assymetric load on
my house bank of (2) group 27s.

The parade is quite fun for friends and colleagues. Quite a bit of
work/concentration for the skipper and occasionally hard on the boat
depending on the debris load in the river... If you boat on one.
Incidentally, many people used generators when we started. Very few have
them anymore.

Kevin
Osprey
30-2 Portland

On Sat, Dec 19, 2015, 10:26 AM Dennis C. via CnC-List <cnc-list@cnc-list.com>
wrote:

> I'd have to look but I think it's something like a 100 amp fuse.  I think
> the wires are something like 2 or 4 AWG. I know the cables are substantial
> and I had to locate the inverter for minimum wire run, like under 10 feet
> total.  I did the calculations using the Blue Sea app.
>
> DIY's are usually surprised when they start sizing cables for the 12 VDC
> side of an inverter install.
>
> I'm helping a buddy with a 2000W inverter install.  We're using 2AWG
> cables with a wire run under 4 feet total.
>
> Dennis C.
>
>
> On Sat, Dec 19, 2015 at 11:08 AM, Jake Brodersen via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Dennis,
>>
>>
>>
>> If you were pulling 830 watts from the inverter, that’s 69 amps @ 12
>> volts!  How big a fuse do you have on your inverter?  My 600 watt inverter
>> uses a 50 amp fuse.
>>
>>
>>
>> Jake
>>
>>
>>
>> *Jake Brodersen*
>>
>> *C&C 35 Mk-III “Midnight Mistress”*
>>
>> *Hampton VA*
>>
>>
>>
>>
>>
>>
>>
>
> _______________________________________________
>
> Email address:
> CnC-List@cnc-list.com
> To change your list preferences, including unsubscribing -- go to the
> bottom of page at:
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

Reply via email to