es, the Halyard cover did shit
the bed, and that probably will be what happens next. I guess I need to
bite the bullet and buy a new coil of line, after shortening this halyard,
now the clutch (Wedge) won't hold the sail up because it has narrowed too
much! Going to try some Samson MLX3 this
g the knot when I replace the halyard instead of the splice. .
Not only is it way easier, the splice was kind of fat and pinched in the
sheave because it is a long splice.
Any thoughts?
Bill Coleman
Erie PA Entrada.
(And thanks to Chuck Gilchrest for his advice on rope selection)
Your contributio
You did replace the impeller, right?
Bill Coleman
On Thu, Jul 24, 2025 at 10:18 AM David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:
> Yes- this started with limited water from the exhaust and overheating. I
> realize I have two separate water circulation paths. I have
Yes and yes.
Bill Coleman
On Wed, Jul 16, 2025, 19:46 CHARLES SCHEAFFER via CnC-List <
cnc-list@cnc-list.com> wrote:
> Is Spartite the best way to shim a mast in the deck ring? Are there other
> ways to shim a mast for a DIYer?
>
> Chuck S
> Your contributions help pay the
ches, but not the end of the world.
Bill Coleman
Erie Pa Former '39
On Wed, Jun 25, 2025 at 10:09 PM jacob fuerst via CnC-List <
cnc-list@cnc-list.com> wrote:
> Sounds like no issues crossing. I have been hesitant to cut into the toe
> rail with concerns of creating a weak point a
I would also suggest that you and your son try to crew for someone in
your area in a few casual races and I think you would get a better
understanding of what is going on.
I hear and I forget. I see and I remember. I do and I understand. --
Confucius.
Bill Coleman
Erie PA
On Tue, Jun 17, 2025
Mine had two halyards for Jib, and two for Spin. The Jib usually comes out
of the center of the mast, and the Spin is usually on top front of the
mast, but always above the Jib halyards.
Bill Coleman
Erie PA
On Tue, Jun 17, 2025 at 4:36 PM Languid Refiner via CnC-List <
cnc-list@cnc-list.
This is the place that has all the SS Elbows!
https://hdimarine.net/shop/
Bill Coleman
Erie
On Sat, Jun 7, 2025 at 9:22 AM David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:
> In my raw water cooling issue that you all have been helping me with, I
> now know that water come
I have somewhere bookmarked a site where they sell nice stainless steel
cast exhaust risers in the aftermarket
Bill Coleman
On Sat, Jun 7, 2025, 09:27 Dave S via CnC-List
wrote:
> FWIW David I had this happen in my new to me (salt water) Volvo, but
> never in my fresh water yanmar.
When you put it back together, put never seize on the threads!
Bill Coleman
On Fri, Jun 6, 2025, 18:23 David Knecht via CnC-List
wrote:
> Definite mixing elbow problem. I got the hose off the exit side and
> virtually nothing coming out. Now to remove it. Two nuts came off easily.
>
On Fri, Jun 6, 2025 at 11:28 AM Bill Coleman wrote:
> Sorry for this redundant comment Dave, but to go over the sealing of the
> pump, I would remove the impeller, smear a bunch of either vaseline or
> silicone grease on the back and circumference and blades, push it on
> firmly,
i've never had this problem, but always hear Yanmar people complaining of
blockage at the exhaust elbow -
Bill Coleman
On Fri, May 30, 2025 at 3:35 PM David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:
> I noticed today when i turned the engine on that i could not hear wate
ing for another boat!
Sorry, I am pretty good at annoying answers.
Bill Coleman
Erie, PA
On Wed, May 28, 2025 at 12:17 PM Della Barba, Joe via CnC-List <
cnc-list@cnc-list.com> wrote:
> The replacement engine I have is getting ready for final testing once I
> get the carb fixed. It al
ate to see the video, but the link doesn't work.
> Kev
>
> *Kevin Wright*
> (289) 886-2172
> kcwright...@gmail.com
> *1985 Landfall 43*
>
>
> On Tue, May 27, 2025 at 10:23 AM Bill Coleman via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> by clicking on
by clicking on Rick Lamparelli.
On Sat, May 24, 2025 at 6:39 PM Ronald B. Frerker via CnC-List <
cnc-list@cnc-list.com> wrote:
> How do I find the link?
>
>
> Sent from my iPad
>
> On May 23, 2025, at 10:04 AM, Bill Coleman via CnC-List <
> cnc-list@cnc-lis
amazing shape - not sure why they had to destroy it, it's a shame.
Bill Coleman
Erie
Your contributions help pay the fees associated with this list and help to keep
it active. Please help by making a small contribution using PayPal at:
https://www.paypal.com/paypalme/stumurray All contri
arine Lobster Buoy paint, I finally bought some, and am going to try it on
some things.
Bill Coleman
Erie
On Thu, May 22, 2025 at 12:29 PM Della Barba, Joe via CnC-List <
cnc-list@cnc-list.com> wrote:
> It is VERY hard to get a good roller-furling sail out of Bacons. Everyone
> wants the
s
his toes, raking a big gouge across them - I stared in horror, waiting for
the blood to start squirting all over. But it didn't happen! He didn't seem
to have any more blood in his toes than a bird. He just said, Damn!, then
laughed it off. Ouch!
Bill Coleman
Erie
On Tue, May 6,
Well, I am glad to hear that even professional mechanics end up taking
twice as long as they think the job should take! I usually take about three
times as long
Bill Coleman
On Fri, Apr 18, 2025, 08:47 Robert Abbott via CnC-List <
cnc-list@cnc-list.com> wrote:
> David:
>
> Sorr
SS Clamps on them. For me, the only downside is that they are
pricey, but there is a local Hose Vendor that has pretty good prices. I
wouldn't use these for a major suction purpose.
Bill Coleman
Erie
On Fri, Apr 11, 2025 at 3:46 PM David Knecht via CnC-List <
cnc-list@cnc-list.com> w
Asking for this little bit of advice is going to bankrupt you!
Bill Coleman
On Fri, Mar 21, 2025, 10:55 Doug Mountjoy via CnC-List <
cnc-list@cnc-list.com> wrote:
> Maybe think about a dripless shaft seal, ans a shaft vibration damper.
> Inspect the shaft.
> I would'
I'm trying to visualize this, and when I do I see lots of water gushing
into your boat - ?
Bill Coleman
On Mon, Mar 31, 2025 at 11:48 AM David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:
> I am ordering parts and soon will do this installation and wanted to thank
> e
Might be a good time to also check your cutlass bearing as long as you are
in the neighborhood! $$$ it's a boat, remember!?
Bill Coleman
Erie
On Fri, Mar 21, 2025 at 8:59 AM Robert Abbott via CnC-List <
cnc-list@cnc-list.com> wrote:
> Thanks all for your response(s). I have made
Marek, is your engine rew water cooled?
Bill Coleman
On Tue, Mar 4, 2025 at 8:24 PM Marek Dziedzic via CnC-List <
cnc-list@cnc-list.com> wrote:
> The only thing that I would add to it is that after the procedure, I open
> the strainer and remove the pink AF from it, so that the s
I am thinking most engines have a strainer right after the thru-hull, no?
When I winterize the engine, I just remove that strainer lid, (clean the
strainer), and pour a gallon and half through the strainer with the engine
running, and I am done -
Bill Coleman
Erie PA
On Tue, Mar 4, 2025 at 11
time
to get hot. Pretty simple to install.
I have a new one to install on another boat, it is from borelmfg.com
Bill Coleman
Erie PA
On Thu, Feb 27, 2025 at 3:04 PM David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:
> There was a recent Practical Sailor article and video concer
l?
It Holds up pretty well.
Bill Coleman
Erie PA
On Wed, Jan 22, 2025 at 12:52 PM cenelson--- via CnC-List <
cnc-list@cnc-list.com> wrote:
> My mast boost appears to have given it up and needs replaced.
>
> My question to the list is which is the best solution-
>
> 1. A fixed
This is the fellow who actually invented the douser -
https://www.chutescoop.com/
Bill Coleman
Erie PA
On Thu, Jan 16, 2025 at 4:31 PM Randy Stafford via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hello Listers,
>
> Can anyone recommend a good source to buy a genoa UV sock, or
Exactly!
That's what we did -
https://youtu.be/wfq30jP_58k
Bill Coleman
Entrada, Erie PA
On Fri, Jan 3, 2025 at 9:41 AM Novabraid via CnC-List
wrote:
> If I have expired bobbins and antique CO2 cartridges and I’m wondering if
> the bladder on my PFD has leaks, why not pull the cord
d-374225.html>
Halkey-Roberts Life Jacket Inflator Replacement Indicator Pins,
<https://www.westmarine.com/leland-halkey-roberts-life-jacket-inflator-replacement-indicator-pins-6-pack-8667263.html>
Bill Coleman
Frozen Erie PA
On Thu, Jan 2, 2025 at 2:20 PM CHARLES SCHEAFFER via CnC-Li
OMG. I've been in the wrong business.
Bill Coleman
On Thu, Dec 26, 2024, 13:59 Joe Della Barba via CnC-List <
cnc-list@cnc-list.com> wrote:
> I was getting estimates of $24,000.
>
>
>
> Joe Della Barba
>
> Coquina C&C 35 MK I
>
> Kent Island MD USA
&
f by
dragging it on the pavement! I'll send you the catalog.
Bill Coleman
Entrada, Erie PA
On Fri, Dec 20, 2024 at 11:55 AM Della Barba, Joe via CnC-List <
cnc-list@cnc-list.com> wrote:
> What I got was they didn’t think they could get the rigging apart to check
> it without
pink stuff was a little slushy. I will sleep well with my glycol.
Regarding the domestic water, I just put the shopvac on the hose coming out
of the pump, open all the faucets in order, and Bob's been my uncle for
years. The pink stuff made the water stink terribly all year,even after
rinsing
That is crazy! I wonder if it had been originally done with that 795 if it
would have held up, seeings as the silicone is a lot more flexible.
Bill Coleman
On Mon, Nov 11, 2024, 14:14 Matthew Wolford via CnC-List <
cnc-list@cnc-list.com> wrote:
> Interesting story as a follow-up: I
Not seeing the draft, which I know is important to you.
Looks really nice. I think you just need to go look at it, then you can
tour the maritime museum. And the thousand Islands.
Why Knot?
\
Bill Coleman
Erie PA
On Thu, May 30, 2024 at 3:57 PM Della Barba, Joe via CnC-List <
cnc-list@
Practical Sailor June Issue is all about waterlines and stripes!
I used 3M 1/2" reflective tape for the cove stripe, 1" for the waterline,
and it looks really sharp, especially in low light.
Bill Coleman
Entrada, Erie PA
On Wed, May 29, 2024 at 8:59 AM John McCrea via CnC-List <
I used 1/2" Lexan, (Tuffak) for both hatch board and sliding hatch cover.
Coincidentally, I just came across a couple pieces that I never used, that
I was thinking of putting on EBay - Let me know what sizes you need off
list.
Lexan is handy if you think anyone might be shooting at you.
I've got some stuff, not really sure what it is but I think it is 9/16 &
with a dynema core and a nice grippy cover. It's nice because there's no
stretch.
Bill Coleman
On Sun, May 26, 2024, 11:05 Bob Mann via CnC-List
wrote:
> I snapped a jib sheet on my 35 Saturday.
type of outhaul.
Bill Coleman
Entrada, Erie PA
On Thu, May 23, 2024 at 1:13 AM CHARLES SCHEAFFER via CnC-List <
cnc-list@cnc-list.com> wrote:
> Our C&C 34R came with a short wire outhaul that we added a 4:1 purchase
> that lives inside the boom. A 3/8" line exits the goo
Whoops, sorry, that went flying out of here before I was done reviewing -
should say rather than two 12V in Series.
On Mon, May 20, 2024 at 12:31 PM Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:
> Wondering if the electrically savvy in the group have a feeling as to
>
Wondering if the electrically savvy in the group have a feeling as to
whether it makes more sense to use 24V Batteries in Parallel rather than
two in series. My gut tells me that plain 24V would make more sense, but
this is not my area of expertise.
Thanks
Bill Coleman
Please show your
It might have to do with how ablative it is - I am using Petit Odyssey
Trinidad, which is considered ablative, but tough enough to take a mild
pressure washing and still be good. I would say if they let you do the
pressure washing, you can see how it is going.
Bill Coleman
Entrada, Erie PA
On
&utm_campaign=GB20240426-FixItAndSail
Bill Coleman
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu
In addition to what Chuck says, Maybe check your quadrant, sometimes the
Rudder can slip down - see if it may be rubbing on the top of the housing -
or maybe on the top bearing, if there is one.
Bill Coleman
On Wed, Apr 17, 2024 at 11:11 AM Ryan Anderson via CnC-List <
cnc-list@cnc-list.
Interesting DIY in Epoxyworks about rebuilding a waterlogged C&C 32 Rudder.
https://www.epoxyworks.com/index.php/replacing-wet-core-in-rudder/?utm_source=newsletter&utm_medium=email&utm_campaign=EW_58&utm_content=another-spade
Bill Coleman
Erie, PA
Please show your appreciation f
f for 1800 bucks earlier, so the whole thing is a rather sore
subject.
Bill Coleman
Erie PA Entrada
On Mon, Apr 15, 2024 at 11:48 AM Della Barba, Joe via CnC-List <
cnc-list@cnc-list.com> wrote:
> The deal with Dyneema is supposedly it is only expensive ONCE, the
> fittings can be
eight savings, when I could have replaced it with rod myself
for next to nothing.
Bill Coleman
Erie PA Entrada
On Mon, Apr 15, 2024 at 9:51 AM Karl Erickson via CnC-List <
cnc-list@cnc-list.com> wrote:
> Has anyone looked into replacing their standing rigging with Dyneema? I am
> in the pro
Only thing is, I don't see anywhere in that ad where is says the trailer is
included - Maybe he is just showing it to show he can move it.
Bill Coleman
On Fri, Apr 12, 2024 at 2:22 PM Joe Della Barba via CnC-List <
cnc-list@cnc-list.com> wrote:
> https://delaware.craigslist.org/bo
Couple of years ago, at winterization time, I unscrewed the cap on My
Engine Groco Filter and found a perfect little bass just through the input
laying on the screen! I couldn't believe he got pulled through that far!
Bill Coleman
Erie PA
On Mon, Apr 8, 2024 at 11:42 AM Matthew Wolford vi
On Fri, Apr 5, 2024 at 2:44 PM Bill Coleman wrote:
> I anguish over this nearly every race, and one thing I can tell you is
> that whichever choice you decide, you will wish you did the other!
>
> Bill Coleman
> Erie, PA
>
>
>
> On Fri, Apr 5, 2024 at 1:48 PM David
leave
your old bases on, and then put your old drums on the ebay bases, and then
sell them on ebay for 400, 300 ea, whatever - and Bob's your uncle!
Bill Coleman
Entrada, Erie PA
On Sun, Feb 25, 2024 at 8:23 PM Rick Brass via CnC-List <
cnc-list@cnc-list.com> wrote:
> I was sort of
n
the manual to put something like 10 or 12 oz of oil in before charging, I
figured well, they would have done that already. And before the Summer was
out, it had lost its charge. Next year, I put the oil in, and voila still
stiff as.. it needs to be.
Bill Coleman
On Thu, Feb 15, 2024, 12:14
eries the time is now.
Bill Coleman
On Thu, Feb 15, 2024, 12:34 Joe Della Barba via CnC-List <
cnc-list@cnc-list.com> wrote:
> I recently got a big AGM battery that needs a big charger. I have a
> ProNautic 15 amp charger with a battery temperature probe that is necessary
> for cor
Yep, take a C&C 39, multiply all the dimensions by 1.69, and you've got a
C&C 66
Bill Coleman
On Tue, Jan 16, 2024, 19:49 CHARLES SCHEAFFER via CnC-List <
cnc-list@cnc-list.com> wrote:
> Beautiful boat but she's priced pretty high. I'd like to see her keel,
&g
#x27;t keep my buddy's bent C&C37 Rudder.
Bill Coleman
On Mon, Dec 11, 2023 at 5:12 PM Matthew Wolford via CnC-List <
cnc-list@cnc-list.com> wrote:
> Richard:
>
>
>
> When you spoke with Rob, did you ask if he knows the diameter/thread size
> of the top of the rudde
d, and he ended up on the rip
rap. His insurance bought him a new rudder, I think from South Shore. He
offered me his Bent one, and oddly I didn't take it, or I would still have
it like everything else and I I could tell you what you need.
Bill Coleman
On Sat, Dec 9, 2023, 15:05 Chris Rieding
I thought there was a nut on the top of the post. If so, it may have come
off and it slipped down till the quadrant hit the hull. Obviously you are
going to have to go down an look, and all things shall be revealed unto you
Bill Coleman
Erie PA
On Thu, Dec 7, 2023 at 3:15 PM Richard Bush via
This looks like a nice article written by a canvasperson who is also a
sailor -
A darn good combination.
https://marinefabricatormag.com/2023/08/31/sailor-friendly-sailboat-dodger-designs/
Bill Coleman
Erie PA
Please show your appreciation for this list and the Photo Album site and help
me pay
r the
sunlight as Dennis suggested
Bill Coleman
On Fri, Nov 17, 2023, 18:49 paul.hood via CnC-List
wrote:
> Went to a specialty hydralics shop to get mine fixed. They couldn't
> don't. Went elsewhere and they did fine. Still wasn't cheap. Done work on
> the 2 hydralics
Will Sailtec rebuild it? I have had good luck communicating with them,
Kevin Savitt has been more than helpful for a number of problems I have had
- ksav...@sailtec.com
I know you can buy spare parts from them, and I think their hydraulics are
very good quality.
Bill Coleman
Entrada, Erie PA
On
Coleman
On Wed, Nov 15, 2023 at 11:53 AM Bill Coleman via CnC-List <
cnc-list@cnc-list.com> wrote:
> Absolutely yes to cloth coverings on the fenders, and the softer fabric is
> better -
>
> Bill Coleman
>
> On Wed, Nov 15, 2023 at 11:24 AM David Knecht via CnC-List &
Absolutely yes to cloth coverings on the fenders, and the softer fabric is
better -
Bill Coleman
On Wed, Nov 15, 2023 at 11:24 AM David Knecht via CnC-List <
cnc-list@cnc-list.com> wrote:
> I had my boat painted a few years ago with Awlcraft 2000. I find that I
> am getting a lar
Is it a VF Shaw Chutescoop?
Bill Coleman
On Sun, Nov 12, 2023, 18:51 Dennis C. via CnC-List
wrote:
> Always an interesting topic. True, conventional wisdom says end for end
> (EFE) up to 35 feet. Also agree EFE is faster. Don't disagree that dip
> pole (DP) gybing is safer.
ide, all adjustable in, out, and up, and also have fold down flaps to
stabilize it up to 12' wide. Really well thought out.
Bill Coleman
Erie PA Entrada
On Wed, Oct 18, 2023 at 10:19 AM Hoyt, Mike via CnC-List <
cnc-list@cnc-list.com> wrote:
> Re mast up. A friend stored his C&a
Is your anti freeze low?
Bill Colelman
On Thu, Oct 26, 2023 at 3:28 PM Doug Mountjoy via CnC-List <
cnc-list@cnc-list.com> wrote:
> There was enough water to turn the oil to chocolate milk. Could be
> condensation, there was a couple of nasty storms that came through here
> this summer. I'm in S
the main line of the boat. Like me, it has no memory, and comes off easily
with no indentation.
Bill Coleman
Erie PA, Entrada
Bill Coleman
On Sat, Oct 21, 2023, 21:10 David Knecht via CnC-List
wrote:
> Hi Bill- I have a portable DeWalt vac/blower which I love for these jobs.
> It runs
, never knew it was there.
Bill Coleman
Erie PA
On Fri, Oct 20, 2023 at 9:36 AM Leeward Rail via CnC-List <
cnc-list@cnc-list.com> wrote:
> Wet vacs are great. Especially on a boat. I use a Rigid Brand 18v
> cordless one for the boat. Small and easily fits in a cockpit locker
I believe this,
My Microwave went this summer with a big bang. I can't remember if it was
at the dock or on the Inverter, but I wouldn't be at all surprised if
shitty AC could have degraded it.
It was a pretty nice one too. My next Inverter/Charger will be true Sine
Wave.
Bill Colem
and try some of this!
https://hamiltonmarine.com/hmbuoypaint/
Bill Coleman
Erie PA
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu
hings
quickly - like a trailer behind me.,
Bill Coleman
On Wed, Sep 13, 2023 at 10:17 AM Karl Kuzis via CnC-List <
cnc-list@cnc-list.com> wrote:
> Looking at Richard's photos from moving his 34cb to the shop got me
> thinking.
>
> Firefly is a C&C 29 Mk1 with extended
Yep.
A pair of Barient 32 ST, look like SS. $2,500. I think that is a sweet
deal.
I paid 2K over 10 years ago for a pair of those, and was thrilled to get
them.
Currently spoiled to death with Harken Electric 66 3 speed Primaries
Bill Coleman
Entrada Erie PA
On Tue, Sep 12, 2023 at 6:11 PM
When I had my 39 hauled out to the shop for a refit, we hit a traffic
signal on the way out. I saw them working on it a few days later.
Then at the busiest intersection, they had to stop kind of fast, the bilge
water rushed forward and started pumping out onto a convertible next to it!
Bill
bits on my boat that have little vinyl repairs that are very hard to find.
Bill Coleman
On Wed, Aug 23, 2023 at 1:04 PM Richard Bush via CnC-List <
cnc-list@cnc-list.com> wrote:
> Karl, that's exactly my concern...I would like to have seen photos of
> that! Thanks
>
> Richar
Those Wraps are intriguing, does anyone know what is involved in removing
them?
Bill Coleman
Entrada, Erie PA
On Tue, Aug 22, 2023 at 10:43 PM Karl Erickson via CnC-List <
cnc-list@cnc-list.com> wrote:
> A dock neighbor had just 1973 C$C 33 wrapped last year. Half the cost and
&
What kind of paint?
Bill Coleman
Erie PA
On Tue, Aug 22, 2023 at 1:34 PM George Cone via CnC-List <
cnc-list@cnc-list.com> wrote:
> One detail, I have / had a 1981 c &c 40 white, I had a quart of special
> paint made to do some patching. Unfortunately the boat was hit by lightn
Hello Pete,
I don't have one, I just know a couple people who do. (Above, - - but I
don't see one in my future. )
The one who put it in his trawler sold it to a friend, and his (new) wife
made him go back to the holding tank
Bill Coleman
On Thu, Aug 17, 2023 at 8:58 PM Peter McMi
Are you sure it is coming from the CB and not the stern? We get some pretty
hard THUNKING sometimes when there is a following wind, even in the slip if
the little wave hits just right under the stern.
Bill Coleman
Erie PA
On Mon, Aug 14, 2023 at 11:14 AM Richard Bush via CnC-List <
cnc-list@
Does anyone have any experience with these clutches?
https://www.velasailingsupply.com/ronstan-constrictor-textile-rope-clutch-single-14mm-rope/
Thanks,
Bill Coleman
Erie PA
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a
extricated myself.
Bill Coleman
Former C&C 39
On Sun, Jul 23, 2023 at 12:11 PM Joe Della Barba via CnC-List <
cnc-list@cnc-list.com> wrote:
> I am running the propane hose for my new stove down the starboard side of
> the boat, which is requiring me to crawl back to the stern
o a 250V Female like the 'shoreside", but with an approved male
30 amp plug, not a household plug. I am just not going to magically get
air conditioning out of a couple same phase 120 volt pedestals.
Thanks again everyone,
Bill Coleman
On Sat, Jul 22, 2023 at 8:09 AM Doug via CnC-List
Thanks Peter, but it was the 30 amp 125 volt male to a 125/250 female that
I was looking for. I have a 125 /250 to a 15 amp for battery charging
Bill Coleman
On Fri, Jul 21, 2023, 17:59 Peter Fell via CnC-List
wrote:
> Unless you're cruising in Europe or UK (or a few other countries
bles me to
charge batteries in the winter.
Thanks,
Bill Coleman
Entrada, Erie PA
Please show your appreciation for this list and the Photo Album site and help
me pay the associated bills. Make a contribution at:
https://www.paypal.me/stumurray
Thanks for your help.
Stu
Just got this in a newsletter from the local broker, it does a little more
Plain 'Splainin on the subject of boat insurance.
<< At the YBAAU, we had an excellent presentation by Bob Peck of Triton
Marine Insurance. If you currently own a boat, you almost certainly noticed
a sizable increase in you
, that doesn't sound too quiet.
Bill Coleman
Entrada, Erie PA
On Thu, Jul 20, 2023 at 2:23 PM Doug Mountjoy via CnC-List <
cnc-list@cnc-list.com> wrote:
> I have a question for the group. Does anyone have experience with the
> Seaflo brand of bilge blowers or pumps? I need to replace
heavy rain and drain the pan to keep the bilge dry. Works great!
Bill Coleman
Entrada, Erie PA
On Sun, Jul 2, 2023, 21:33 Dean McNeill via CnC-List
wrote:
> Thanks all… some great ideas!
> Dean
>
> On Jul 2, 2023, at 9:58 PM, John Read via CnC-List
> wrote:
>
> On my 34 w
they used to be C&C Dealers!
Bill Coleman
Erie PA Entrada
On Sat, Jun 10, 2023 at 9:29 PM Thomas Perison via CnC-List <
cnc-list@cnc-list.com> wrote:
> Greetings all -
>
> I completed the 720nm trip at 1230 today, pulling into my slip at RCR
> Marina in Buffalo.
>
> Man
Let's just be thankful we're not flying airplanes!
Bill Coleman
On Sun, Jun 11, 2023, 09:42 Korbey Hunt via CnC-List
wrote:
> I have a 1980 34 C&C located in Ketchikan, AK. I only use it in the
> summer. It has a new Yanmar 30 hp engine with 300 hrs. Last year when
>
I use a First Alert GC01
Plug it in at home during the off season, move it down to the boat in the
summer.
CO2, Methane, Propane.
When away from the dock it runs on 9V Battery
Bill Coleman
Erie PA
On Wed, May 31, 2023 at 1:23 PM Doug Mountjoy via CnC-List <
cnc-list@cnc-list.com> wrote:
You are lucky you are going to Buffalo, a friend of mine is stuck for 3
weeks at Brewertons, just out of Onida (a nice layover) as a bridge is out
going down the Oswego leg to Ontario.
Bill Coleman
Erie PA
On Sun, May 28, 2023 at 4:15 PM Thomas Perison via CnC-List <
cnc-list@cnc-list.com>
also help if available.
Bill Coleman
Entrada, Erie PA
On Wed, May 17, 2023 at 10:42 AM Charlie Nelson via CnC-List <
cnc-list@cnc-list.com> wrote:
> I am thinking of getting 2 gallons of bottom paint currently on sale at
> Defender/West Marine (Oydessy HD) that I may not need for 6
leaking. He plans to pull it tomorrow to confirm. I talked briefly with
> Bill Coleman on this list, and he suggested replacing the aluminum tank
> with a plastic tank. Does anyone know a source for a plastic replacement
> diesel tank that will fit this boat?
=lubesite+grease+feeder&qid=1682090312&sprefix=lubesite%2Caps%2C82&sr=8-2
Bill Coleman
On Fri, Apr 21, 2023 at 8:24 AM Korbey Hunt via CnC-List <
cnc-list@cnc-list.com> wrote:
> Thanks. I bought a zerk fitting to add to the grease cup. The idea of a
> hose extension is
AwlGrip I believe is a polyisocyanate. Awlcraft is a polyurethane.
Think diamonds vs. Granite. I also need to do some touch up on AwlGrip,
and I intend to just touch it up with Awlgrip and wet-sand and buff. If I
can ever figure out which color it is.
Bill Coleman
On Thu, Apr 20, 2023 at 11
hated
just the short trip from the lift well to my slip with the spar laying
down. I once caught the top of the spar on the sling cables backing out
with my 39 in a crosswind, and almost ripped the mast off the boat.
https://pilgrimliberty.wordpress.com/2018/05/page/2/
Bill Coleman
Entrada, Er
r allow
their people to go out on this thing on open water. Think, tiger King.
Bill Coleman
Entrada, Erie PA
On Tue, Apr 18, 2023, 20:05 Dennis C. via CnC-List
wrote:
> Long weekend. Took Touche' from its home slip in Mandeville, LA to
> Pensacola to get bottom paint and topsides tou
everyone else's price for the
Pettit Triton out of the water. Of course the Blue is back-ordered, but I
am a patient man. The sale ends tonite, BTW.
Bill Coleman
Entrada, Erie PA
On Sat, Apr 1, 2023 at 8:20 PM ALAN BERGEN via CnC-List <
cnc-list@cnc-list.com> wrote:
> Don't acc
Another interesting way to ship awkward stuff like that is via Greyhound!
Bill Coleman
On Wed, Apr 5, 2023 at 5:32 PM Randy Stafford via CnC-List <
cnc-list@cnc-list.com> wrote:
> Hi Chuck,
>
> Yes, we saw a bunch of kiteboarders and windsurfers on the sound side of
> Hatte
50 to send it back, and have it resent. Not a happy camper. I
think the once loyal employees are quiet-quitting from the new hedge fund
owners. I have been buying from them since I was a kid in the sixties when
they were selling mostly fiberglass and polyester. . So much for that.
Bill Coleman
E
Are you referring to the top or lower lifeline? In the older boats the top
was a cast bronze eye, with, I think a half inch od X 16 ga. Tube bushing
for the lower -
Bill Coleman
On Mon, Mar 20, 2023, 20:04 Dave S via CnC-List
wrote:
> I have replaced Windstar's (33-2) lifelines, and
Yes! It's like flying, anybody can take off in a plane, but landing is
another story.! When he first launched it, he almost ran the drone into the
leech. I would think they would buy one of those splash drones that can
survive in water.
Bill Coleman
On Sat, Mar 18, 2023, 18:08 Tom Buscagli
1 - 100 of 1210 matches
Mail list logo
