Gentlefolk and the other Ian, Read and re-read the .ini config documentation and notes on home settings.
Changed the sign of parameters as suggested, no change in behavior. Thinking about it all I come to a much more fundamental problem with regard to home. I will try and explain. Take the X and Y axis. Looking at the frame of the machine the X axis is from left to right, the Y axis is bottom to top. By convention (established by Descartes?) the X0.0 should be on the left and Y0.0 at the bottom. When I try and home the Y axis it heads off to the top some 300mmm away. So how do I tell Axis that Y 'home' is down at the bottom of the axis so I can establish Y0.0 in the correct perspective???? Swap the connections to the stepper? I cannot see anything in the literature about controlling the home search direction. Any help/thoughts/suggestions appreciated. Ian. ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
