True! I know a few with even less! Rich
> On Nov 21, 2013, at 10:27, "Hoyt, Mike" <[email protected]> wrote: > > I thought that everyone who had bucks then boat a boat and no longer had > bucks .... > > From: CnC-List [mailto:[email protected]] On Behalf Of Rich > Knowles > Sent: Thursday, November 21, 2013 10:12 AM > To: [email protected] > Subject: Re: Stus-List Datamarine stuff FREE > > Gary: > > If there are no other takers, I'll take it as a give-away to someone who has > boat but 0 bucks. I know a few...;) > > Rich > >> On Nov 21, 2013, at 10:08, "dwight" <[email protected]> wrote: >> >> Very nice gesture Gary; hopefully someone will find it useful >> From: CnC-List [mailto:[email protected]] On Behalf Of Gary >> Nylander >> Sent: November 21, 2013 10:01 AM >> To: [email protected] >> Subject: Stus-List Datamarine stuff FREE >> I have a Datamarine Link 5100 system - appears to be complete. Came from my >> SO's late sister - must have been taken out before they upgraded and >> embarked on a voyage south. >> Datamarine 5100 control head, Display unit with digital speed and depth, >> analog wind; DX111 depth, SX 120 speed, wind speed/direction mast top unit, >> coax cable, through hull speed and depth sensors.... >> Yours for the cost of shipping, I have no need. >> Gary Nylander >> Maryland >> ----- Original Message ----- >> From: Robert Abbott >> To: [email protected] >> Sent: Wednesday, November 20, 2013 9:13 AM >> Subject: Stus-List Muffler >> John: >> >> I replaced the SS muffler this past Spring.....don't remember the exact >> measurements put similar to yours. >> >> I replaced it with a Vernalift resin muffler....slightly bigger (2" higher) >> muffler but with the same 2" inlet and 1 1/2" outlet. I will try to find my >> receipt which will have the part # if that helps you. Bottom line, >> Vernalift makes a resin muffler with a 1/1/2" outlet. I didn't want to get >> into adding hose adapters as my exhaust hoes was replaced last year and it >> is 1 1/2". There are no back pressure issues to worry about with the 1 1/2" >> outlet with these small marine diesel engines. >> >> Bob Abbott >> AZURA >> C&C 32 - 84 >> Halifax, N.S. >> >> >> >> >> >> >> >> >>> On 2013/11/20 9:00 AM, John and Maryann Read wrote: >>> The stainless muffler has finally given up the ghost. It is 6 ¼ round, 2 >>> inch side inlet and 1 ½ inch top outlet, 9 inches high and the base is 7 >>> inches square. Any suggested sources?? Vernalift by Centek Industries >>> makes a close copy but the outlet is 2 inch. On a related note, any >>> thoughts on why the outlet is smaller than the inlet and does this create >>> any backpressure issues?? The engine outlet is 2 inch. On the other hand, >>> this set up has worked well for 30 years so it can’t be all bad J >>> TIA >>> John and Maryann >>> Legacy III >>> 1982 C&C 34 >>> Noank, CT >>> >>> >>> >>> >>> _______________________________________________ >>> This List is provided by the C&C Photo Album >>> http://www.cncphotoalbum.com >>> [email protected] >> >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> [email protected] >> No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 2012.0.2247 / Virus Database: 3629/6354 - Release Date: 11/21/13 >> _______________________________________________ >> This List is provided by the C&C Photo Album >> http://www.cncphotoalbum.com >> [email protected] > _______________________________________________ > This List is provided by the C&C Photo Album > http://www.cncphotoalbum.com > [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
