John,
Will a Vernalift 1500210 fit? It's 2 inch side inlet and 1.5 top outlet but a
larger diameter and base.
If not, go with the Vernalift and a fiberglass reducer. Centek also makes the
reducers. They're about $25.
The reason the outlet can be smaller is the exhaust gases get cooled down by
the water in the mixer/muffler. Thus the volume is reduced.
Dennis C.
>________________________________
> From: John and Maryann Read <johnpr...@comcast.net>
>To: cnc-list@cnc-list.com
>Sent: Wednesday, November 20, 2013 7:00 AM
>Subject: Stus-List Muffler
>
>
>
>The stainless muffler has finally given up the ghost. It is 6 ¼ round, 2 inch
>side inlet and 1 ½ inch top outlet, 9 inches high and the base is 7 inches
>square. Any suggested sources?? Vernalift by Centek Industries makes a close
>copy but the outlet is 2 inch. On a related note, any thoughts on why the
>outlet is smaller than the inlet and does this create any backpressure
>issues?? The engine outlet is 2 inch. On the other hand, this set up has
>worked well for 30 years so it can’t be all bad J
>
>TIA
>
>John and Maryann
>Legacy III
>1982 C&C 34
>Noank, CT
>
>
>_______________________________________________
>This List is provided by the C&C Photo Album
>http://www.cncphotoalbum.com
>CnC-List@cnc-list.com
>
>
>
_______________________________________________
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
