I thought that everyone who had bucks then boat a boat and no longer had bucks ....
________________________________ From: CnC-List [mailto:[email protected]] On Behalf Of Rich Knowles Sent: Thursday, November 21, 2013 10:12 AM To: [email protected] Subject: Re: Stus-List Datamarine stuff FREE Gary: If there are no other takers, I'll take it as a give-away to someone who has boat but 0 bucks. I know a few...;) Rich On Nov 21, 2013, at 10:08, "dwight" <[email protected]> wrote: Very nice gesture Gary; hopefully someone will find it useful ________________________________ From: CnC-List [mailto:[email protected]] On Behalf Of Gary Nylander Sent: November 21, 2013 10:01 AM To: [email protected] Subject: Stus-List Datamarine stuff FREE I have a Datamarine Link 5100 system - appears to be complete. Came from my SO's late sister - must have been taken out before they upgraded and embarked on a voyage south. Datamarine 5100 control head, Display unit with digital speed and depth, analog wind; DX111 depth, SX 120 speed, wind speed/direction mast top unit, coax cable, through hull speed and depth sensors.... Yours for the cost of shipping, I have no need. Gary Nylander Maryland ----- Original Message ----- From: Robert Abbott <mailto:[email protected]> To: [email protected] Sent: Wednesday, November 20, 2013 9:13 AM Subject: Stus-List Muffler John: I replaced the SS muffler this past Spring.....don't remember the exact measurements put similar to yours. I replaced it with a Vernalift resin muffler....slightly bigger (2" higher) muffler but with the same 2" inlet and 1 1/2" outlet. I will try to find my receipt which will have the part # if that helps you. Bottom line, Vernalift makes a resin muffler with a 1/1/2" outlet. I didn't want to get into adding hose adapters as my exhaust hoes was replaced last year and it is 1 1/2". There are no back pressure issues to worry about with the 1 1/2" outlet with these small marine diesel engines. Bob Abbott AZURA C&C 32 - 84 Halifax, N.S. On 2013/11/20 9:00 AM, John and Maryann Read wrote: The stainless muffler has finally given up the ghost. It is 6 ¼ round, 2 inch side inlet and 1 ½ inch top outlet, 9 inches high and the base is 7 inches square. Any suggested sources?? Vernalift by Centek Industries makes a close copy but the outlet is 2 inch. On a related note, any thoughts on why the outlet is smaller than the inlet and does this create any backpressure issues?? The engine outlet is 2 inch. On the other hand, this set up has worked well for 30 years so it can't be all bad :-) TIA John and Maryann Legacy III 1982 C&C 34 Noank, CT _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected] ________________________________ _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected] ________________________________ No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2247 / Virus Database: 3629/6354 - Release Date: 11/21/13 _______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com [email protected]
