Figured out myself. If anyone has the same issue:
set bit 12 of port A to 1:
GPADAT |= (1 << 11)
fcipaq wrote:
>
> Hey everyone,
>
> I've got an ACER n310 (n300 series). It features a s3c2440 running at 300
> MHz, 64 MB SDRAM and 128 MB NAND ROM (it's Samsung k9f1g08). It's not
> equipped w
Two new options:
CONFIG_PL011_SERIAL_RLCR
Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500)
have separate receive and transmit line control registers. Set
this variable to initialize the extra register.
CONFIG_PL011_SERIAL_FLUSH_ON_INIT
On some platforms (e.g. U8500) U-Boot i
> -Original Message-
> From: Albert ARIBAUD [mailto:albert.u.b...@aribaud.net]
> Sent: Thursday, May 12, 2011 11:11 AM
> To: Rogan Dawes
> Cc: Wolfgang Denk; u-boot@lists.denx.de; Prafulla Wadaskar
> Subject: Re: Pull request: u-boot-arm/master
>
> Hi Rogan,
>
> Le 12/05/2011 00:11, Rog
> -Original Message-
> From: Valentin Longchamp [mailto:valentin.longch...@keymile.com]
> Sent: Wednesday, May 11, 2011 8:52 PM
> To: Prafulla Wadaskar
> Cc: u-boot@lists.denx.de; holger.bru...@keymile.com
> Subject: Re: [PATCH v3 0/8] keymile arm boards update, part 2
>
> Hi Prafulla,
>
On 11/05/11 10:15, shilpa jadav wrote:
> Hi ,
> When i am trying to compile u-boot for omapL137 by issuing the following
> command
> make da830_omapl137_evm_config CROSS_COMPILE=arm-none-linux-gnueabi-
>
> Our goal is to get USB up on the uboot . We are trying to boot OMAPL137 Evm
> using USB mass
On 05/12/2011 08:13 AM, Jason Liu wrote:
> Hi, Stefano,
>
Hi Jason,
>>> u32 get_cpu_rev(void);
>>> #define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev)
>>> void sdelay(unsigned long);
>>> +void pmic_reg_write(u32 reg, u32 value);
>>> +u32 pmic_reg_read(u32 reg);
>>
>> The pmic_ prototy
Hi Prafulla,
On Thu, May 12, 2011 at 01:48:34AM -0700, Prafulla Wadaskar wrote:
>
>
> > -Original Message-
> > From: Albert ARIBAUD [mailto:albert.u.b...@aribaud.net]
> > Sent: Thursday, May 12, 2011 11:11 AM
> > To: Rogan Dawes
> > Cc: Wolfgang Denk; u-boot@lists.denx.de; Prafulla Wadas
Hi Rogan,
On Thu, May 12, 2011 at 12:11:41AM +0200, Rogan Dawes wrote:
> On 2011/05/11 11:07 PM, Albert ARIBAUD wrote:
> > Simon Guinot (2):
> >mv-common.h: fix DRAM banks configuration
>
> I think Prafulla already accepted my own change to fix this. Not sure
> which one is considered bet
On 05/11/2011 10:03 AM, Jason Liu wrote:
> This patch add dialog pmic(DA9053) driver with I2C interface support
> In order to not duplicate code and according to the discussion on the
> mail-list, change fsl_pmic.c to spi_i2c_pmic.c.Actaully,spi_i2c_pmic.c
> is just a wrapper for PMIC communication
This patch allows to enable the netconsole even if `serverip' is not set.
Because netconsole use the environment variable `ncip' to configure the
destination IP, `serverip' don't need to be defined.
Signed-off-by: Simon Guinot
---
Changes for v2:
- restore NetOurIP check
Changes for v3:
- a
This patch series adds support for Network Space v2 board and parents.
Changes for v2:
- netconsole: restore NetOurIP check
- add entries to MAINTAINERS file
- move boards from root Makefile to boards.cfg
- move MACH_TYPE definition into netspace_v2.h
- remove CONFIG_SYS_HZ redefinition
This patch add support for the Network Space v2 board and parents, based
on the Marvell Kirkwood 6281 SoC. This include Network Space (Max) v2
and Internet Space v2.
Additional information is available at:
http://lacie-nas.org/doku.php?id=network_space_v2
Signed-off-by: Simon Guinot
---
Changes
> -Original Message-
> From: Simon Guinot [mailto:simon.gui...@sequanux.org]
> Sent: Thursday, May 12, 2011 3:19 PM
> To: Prafulla Wadaskar
> Cc: Albert ARIBAUD; u-boot@lists.denx.de; Simon Guinot
> Subject: [PATH v7 1/2] netconsole: remove `serverip' check
>
> This patch allows to enabl
> -Original Message-
> From: Simon Guinot [mailto:simon.gui...@sequanux.org]
> Sent: Thursday, May 12, 2011 3:19 PM
> To: Prafulla Wadaskar
> Cc: Albert ARIBAUD; u-boot@lists.denx.de; Simon Guinot
> Subject: [PATH v7 2/2] Add support for Network Space v2
>
> This patch add support for the
> -Original Message-
> From: Valentin Longchamp [mailto:valentin.longch...@keymile.com]
> Sent: Wednesday, May 04, 2011 9:24 PM
> To: u-boot@lists.denx.de
> Cc: holger.bru...@keymile.com; Prafulla Wadaskar; Valentin Longchamp;
> Heiko Schocher; Wolfgang Denk; Detlev Zundel
> Subject: [PAT
> -Original Message-
> From: Valentin Longchamp [mailto:valentin.longch...@keymile.com]
> Sent: Wednesday, May 04, 2011 9:24 PM
> To: u-boot@lists.denx.de
> Cc: holger.bru...@keymile.com; Prafulla Wadaskar; Valentin Longchamp;
> Heiko Schocher; Wolfgang Denk; Detlev Zundel
> Subject: [PAT
> -Original Message-
> From: Valentin Longchamp [mailto:valentin.longch...@keymile.com]
> Sent: Wednesday, May 04, 2011 9:24 PM
> To: u-boot@lists.denx.de
> Cc: holger.bru...@keymile.com; Prafulla Wadaskar; Valentin Longchamp;
> Wolfgang Denk; Detlev Zundel
> Subject: [PATCH v3 3/8] arm/k
> -Original Message-
> From: Valentin Longchamp [mailto:valentin.longch...@keymile.com]
> Sent: Wednesday, May 04, 2011 9:24 PM
> To: u-boot@lists.denx.de
> Cc: holger.bru...@keymile.com; Prafulla Wadaskar; Valentin Longchamp;
> Wolfgang Denk; Detlev Zundel
> Subject: [PATCH v3 8/8] arm/k
> -Original Message-
> From: Valentin Longchamp [mailto:valentin.longch...@keymile.com]
> Sent: Wednesday, May 04, 2011 9:24 PM
> To: u-boot@lists.denx.de
> Cc: holger.bru...@keymile.com; Prafulla Wadaskar; Valentin Longchamp;
> Wolfgang Denk; Detlev Zundel
> Subject: [PATCH v3 6/8] arm/k
> -Original Message-
> From: Valentin Longchamp [mailto:valentin.longch...@keymile.com]
> Sent: Wednesday, May 04, 2011 9:24 PM
> To: u-boot@lists.denx.de
> Cc: holger.bru...@keymile.com; Prafulla Wadaskar; Valentin Longchamp;
> Wolfgang Denk; Detlev Zundel
> Subject: [PATCH v3 5/8] arm/k
Signed-off-by: Shaohui Xie
Signed-off-by: Kumar Gala
---
include/configs/corenet_ds.h | 10 ++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index d1cda15..561f3c2 100644
--- a/include/configs/corenet_ds.h
++
Signed-off-by: Shaohui Xie
---
board/freescale/common/Makefile |2 ++
boards.cfg |7 ++-
include/configs/corenet_ds.h| 30 ++
3 files changed, 30 insertions(+), 9 deletions(-)
diff --git a/board/freescale/common/Makefile b/board/
Hi Prafulla,
On Thu, May 12, 2011 at 03:36:48AM -0700, Prafulla Wadaskar wrote:
>
>
> > -Original Message-
> > From: Simon Guinot [mailto:simon.gui...@sequanux.org]
> > Sent: Thursday, May 12, 2011 3:19 PM
> > To: Prafulla Wadaskar
> > Cc: Albert ARIBAUD; u-boot@lists.denx.de; Simon Guin
Hi Prafulla,
On Thu, May 12, 2011 at 03:17:24AM -0700, Prafulla Wadaskar wrote:
>
>
> > -Original Message-
> > From: Simon Guinot [mailto:simon.gui...@sequanux.org]
> > Sent: Thursday, May 12, 2011 3:19 PM
> > To: Prafulla Wadaskar
> > Cc: Albert ARIBAUD; u-boot@lists.denx.de; Simon Guin
> -Original Message-
> From: Simon Guinot [mailto:si...@sequanux.org]
> Sent: Thursday, May 12, 2011 5:17 PM
> To: Prafulla Wadaskar
> Cc: Simon Guinot; Albert ARIBAUD; u-boot@lists.denx.de; Ashish Karkare;
> Prabhanjan Sarnaik
> Subject: Re: [PATH v7 2/2] Add support for Network Space v2
> -Original Message-
> From: Simon Guinot [mailto:si...@sequanux.org]
> Sent: Thursday, May 12, 2011 5:25 PM
> To: Prafulla Wadaskar
> Cc: Simon Guinot; Albert ARIBAUD; u-boot@lists.denx.de; Wolfgang Denk;
> Ashish Karkare; Prabhanjan Sarnaik
> Subject: Re: [PATH v7 1/2] netconsole: remov
1. make sure that page table setup is not done multiple times
2. flush_dcache_all() is more appropriate while disabling cache
than a range flush on the entire memory(flush_cache())
Provide a default implementation for flush_dcache_all()
for backward compatibility and to avoid build issues
adapt omap4 to the new layered cache maintenance framework
Signed-off-by: Aneesh V
---
V2:
* Changes for the function pointer to weakly linked change
---
arch/arm/cpu/armv7/omap4/lowlevel_init.S| 18 ++
arch/arm/include/asm/arch-omap4/sys_proto.h |1 -
include/configs/
make default implementation of cache_flush() weakly linked so that
sub-architectures can override it
Signed-off-by: Aneesh V
---
arch/arm/lib/cache.c |4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c
index 30686fe..27123cd 100
add utility macros for:
* bit field operations
* log2n functions
Signed-off-by: Aneesh V
---
V2:
* Newly added in v2
---
arch/arm/include/asm/utils.h | 80 ++
1 files changed, 80 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/include/asm/u
With D-cache and MMU enabled for ARM in u-boot it becomes imperative to
support a minimal set of cache maintenance operations and necessary
initializations before enabling MMU.
This series of patches attempt to do the following for armv7:
* Necessary initialization sequence before enabling MMU tha
replace all occurences of CONFIG_L2_OFF with a more appropriate
CONFIG_SYS_NO_L2CACHE
CONFIG_SYS_NO_L2CACHE has been chosen to be in line with
CONFIG_SYS_NO_ICACHE and CONFIG_SYS_NO_DCACHE
Signed-off-by: Aneesh V
---
arch/arm/cpu/armv7/cpu.c|6 +-
include/configs/ca9x4_ct_vx
PL310 is the L2$ controller from ARM used in many SoCs
including the Cortex-A9 based OMAP4430
Add support for some of the key PL310 operations
- Invalidate all
- Invalidate range
- Flush(clean & invalidate) all
- Flush range
Signed-off-by: Aneesh V
---
V2:
* More
- Enable I-cache on bootup
- Enable MMU and D-cache immediately after relocation
- Do necessary initialization before enabling d-cache and MMU
- Changes to cleanup_before_linux()
- Make changes according to the new framework
Signed-off-by: Aneesh V
---
V2:
* Changes for -march=ar
adapt s5pc1xx to the new layered cache maintenance framework
Signed-off-by: Aneesh V
---
V2:
* Changes for the function pointer to weakly linked change
---
arch/arm/cpu/armv7/s5pc1xx/cache.S| 88 ++---
arch/arm/include/asm/arch-s5pc1xx/sys_proto.h |3 -
2 f
adapt omap3 to the new layered cache maintenance framework
Signed-off-by: Aneesh V
---
V2:
* Changes for the function pointer to weakly linked change
---
arch/arm/cpu/armv7/omap3/Makefile |1 -
arch/arm/cpu/armv7/omap3/board.c| 138 --
arch/arm/cpu/armv7/o
- Add a framework for layered cache maintenance
- separate out SOC specific outer cache maintenance from
maintenance of caches known to CPU
- Add generic ARMv7 cache maintenance operations that affect all
caches known to ARMv7 CPUs. For instance in Cortex-A8 these
opertions w
Hello.
On 11-05-2011 18:54, Mike Frysinger wrote:
>>> @@ -68,6 +72,23 @@ int post_init_f (void)
>>>int __post_hotkeys_pressed(void)
>>>{
>>> +#ifdef CONFIG_SYS_POST_HOTKEYS_GPIO
>>> + int ret;
>>> + unsigned gpio = CONFIG_SYS_POST_HOTKEYS_GPIO;
>>> +
>>> + ret = gpio_request(gpio, "
On Thu, Apr 28, 2011 at 8:41 PM, John Rigby wrote:
> On Thu, Apr 28, 2011 at 9:40 AM, Albert ARIBAUD
> wrote:
>> Le 28/04/2011 16:47, John Rigby a écrit :
>>
armv7: Add ST-Ericsson u8500 arch
armv7: Add support for ST-Ericsson U8500 href platform
>>
>> Applying these on top of the cur
On 05/05/2011 10:08 AM, Steven A. Falco wrote:
> APM errata CHIP_21 for the 405EX/EXr (from the rev 1.09 document dated
> 4/27/11) states that rev D processors may wake up with the wrong feature
> set. This patch implements the APM-proposed workaround.
I have not seen any further comments on this
On Thursday 05 May 2011 16:08:35 Steven A. Falco wrote:
> APM errata CHIP_21 for the 405EX/EXr (from the rev 1.09 document dated
> 4/27/11) states that rev D processors may wake up with the wrong feature
> set. This patch implements the APM-proposed workaround.
>
> To enable this patch for your b
Resolve P1020 second USB controller multiplexing with eLBC
- mandatory to mention USB2 in hwconfig string to select it
over eLBC, otherwise USB2 node is removed
- works only for SPI and SD boot
Signed-off-by: Ramneek Mehresh
---
Changes for v2:
- Incorporated Wol
Add CONFIG_HAS_FSL_DR_USB macro for P1020RDB
Signed-off-by: Ramneek Mehresh
---
Changes for v2:
- rebased on http://git.denx.de/u-boot.git
include/configs/P1_P2_RDB.h |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P
Hi Wolfgang,
please pull the following fix:
The following changes since commit 264eaa0ea967bac32214b87d60cfc86c8b22cac6:
keymile boards: move keymile specific header in subdir (2011-05-10 23:22:49
+0200)
are available in the git repository at:
git://www.denx.de/git/u-boot-ppc4xx.git master
On Thursday, May 12, 2011 08:47:56 Sergei Shtylyov wrote:
> On 11-05-2011 18:54, Mike Frysinger wrote:
> >>>int __post_hotkeys_pressed(void)
> >>>{
> >>> +#ifdef CONFIG_SYS_POST_HOTKEYS_GPIO
> >>> + return ret;
> >>> +#endif
> >>>
> >> You surely meant #else here?
> >>>
> >>>
On Thursday, May 12, 2011 06:17:24 Prafulla Wadaskar wrote:
> Hi Ben/Wolfgang
> Can you pls review/comment/pull it ?
Ben is no longer here, and the u-boot-net tree is dead. Wolfgang is currently
covering things.
-mike
signature.asc
Description: This is a digitally signed message part.
hi
I was wondering what I was doing wrong here !
The USB functionality in Linux only works if I run 'usb start' in UBoot before
starting the kernel.
Not sure what will resolve this, of course I can make automatic start command
during starting of the bootloader but I think that's not optimal.
On Thursday, May 12, 2011 11:36:19 Einar Már Björgvinsson wrote:
> The USB functionality in Linux only works if I run 'usb start' in UBoot
> before starting the kernel.
file a bug with the Linux maintainers
-mike
signature.asc
Description: This is a digitally signed message part.
___
Dear Simon Guinot,
In message <20110512114727.gc6...@kw.sim.vm.gnt> you wrote:
>
> > > +#define CONFIG_IDENT_STRING " LaCie Network Space v2"
> > > +#elif defined(CONFIG_NETSPACE_MAX_V2)
> > > +#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2
> > > +#define CONFIG_IDENT_STR
Dear Simon Guinot,
In message <20110512115521.gd6...@kw.sim.vm.gnt> you wrote:
>
> > This patch looks to be independent.
> > I don't have any comments for this.
> > Should be applied to u-boot-net.git.
>
> The patch itself is independent but the Network Space v2 board setup
> rely on it. Without
On Thu, 2011-05-12 at 15:36 +, Einar Már Björgvinsson wrote:
> hi
>
> I was wondering what I was doing wrong here !
>
> The USB functionality in Linux only works if I run 'usb start' in UBoot
> before starting the kernel.
>
> Not sure what will resolve this, of course I can make automatic s
hi
of course I forgot to mention my platform, sorry about that
CPU: MPC5200b
Kernel: 2.6.33-rc6
Uboot: U-Boot 2009.03
regards
Einar
From: u-boot-boun...@lists.denx.de [u-boot-boun...@lists.denx.de] on behalf of
Peter Tyser [pty...@xes-inc.com]
Sent: Thu
Dear John Rigby,
In message <1305187511-8455-1-git-send-email-john.ri...@linaro.org> you wrote:
> Two new options:
>
> CONFIG_PL011_SERIAL_RLCR
>
> Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500)
> have separate receive and transmit line control registers. Set
> this variabl
Dear Simon Guinot,
In message <1305193737-5952-2-git-send-email-simon.gui...@sequanux.org> you
wrote:
> This patch allows to enable the netconsole even if `serverip' is not set.
>
> Because netconsole use the environment variable `ncip' to configure the
> destination IP, `serverip' don't need to
Dear Simon Guinot,
In message <20110503131942.gu19...@kw.sim.vm.gnt> you wrote:
>
> I have failed to find an entry for this patch in the U-Boot patchwork
> (and any previous version except the very first).
I don't see it either.
> Have I missed something and/or done something wrong ?
Unlikely.
Dear Albert ARIBAUD,
In message <4dcafa98.2020...@aribaud.net> you wrote:
> Hi Wolfgang,
>
> The following changes since commit 264eaa0ea967bac32214b87d60cfc86c8b22cac6:
>
>keymile boards: move keymile specific header in subdir (2011-05-10
> 23:22:49 +0200)
>
> are available in the git rep
Dear Stefan Roese,
In message <201105121617.47525...@denx.de> you wrote:
> Hi Wolfgang,
>
> please pull the following fix:
>
> The following changes since commit 264eaa0ea967bac32214b87d60cfc86c8b22cac6:
>
> keymile boards: move keymile specific header in subdir (2011-05-10 23:22:49
> +0200)
Dear Mike Frysinger,
In message <1304289062-25727-1-git-send-email-vap...@gentoo.org> you wrote:
> The previous commit imported a little too much from upstream. We need
> to disable stdio.h when using U-Boot.
>
> Reported-by: Wolfgang Denk
> Signed-off-by: Mike Frysinger
> ---
> lib/zlib/zuti
Dear Wolfgang Denk,
In message <1304260506-1456-1-git-send-email...@denx.de> you wrote:
> Commit 9d8fbd1 "powerpc, 8xx: Fixup all 8xx u-boot.lds scripts" broke
> building of the MPC8260 based "hymod" board. Fix this.
>
> Signed-off-by: Wolfgang Denk
> Cc: Murray Jensen
> Cc: Joakim Tjernlund
Dear Sergei Shtylyov,
In message <4dbff9fd.1070...@mvista.com> you wrote:
>
> > Umm... you _are_ aware that you can put dynamically sized arrays on
> > the stack, aren't you?
>
> No, it seems I'm not. Is it a standard C now?
It's been a GCC extension forever (well, I have to admit that I do
Dear Luca Ceresoli,
In message <1303143594-5345-3-git-send-email-luca.ceres...@comelit.it> you
wrote:
> This is needed for the upcoming TFTP server implementation.
>
> This also simplifies PingHandler() and fixes rxhand_f documentation.
>
> Signed-off-by: Luca Ceresoli
> Cc: Wolfgang Denk
> -
Dear Luca Ceresoli,
In message <1303143594-5345-4-git-send-email-luca.ceres...@comelit.it> you
wrote:
> With the upcoming TFTP server implementation, the remote node can be
> either a client or a server, so avoid ambiguities.
>
> Signed-off-by: Luca Ceresoli
> Cc: Wolfgang Denk
> ---
> Changes
Dear Wolfgang Denk,
In message <1304540989-10450-1-git-send-email...@denx.de> you wrote:
> When calling getenv_f() with a too small buffer, it would print an
> error message like this:
>
> env_buf too small [32]
>
> This is not really helpful as it does not give any indication which of
> t
Dear Wolfgang Denk,
In message <1304541148-11038-1-git-send-email...@denx.de> you wrote:
> A large number of boards incorrectly used getenv() in their board init
> code running before relocation. In some cases this caused U-Boot to
> hang when certain environment variables grew too long.
> Fix th
Hi,
Is there a plan to add SD 3.0 support to uboot's mmc driver, including the use
of UHS modes?
Thanks,
Anish
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signed-off-by: Fabio Estevam
---
MAINTAINERS |1 +
board/freescale/mx53smd/Makefile | 48
board/freescale/mx53smd/imximage.cfg | 96 +++
board/freescale/mx53smd/mx53smd.c| 222 ++
boards.cfg
Dear Trivedi Anish-R6AAKA,
In message
<02b259ebc9134a47b143131fcaf2fea30e2...@039-sn1mpn1-004.039d.mgd.msft.net> you
wrote:
>
> Is there a plan to add SD 3.0 support to uboot's mmc driver, including the
> use of UHS modes?
As soon as anybody submits patches :-)
Best regards,
Wolfgang Denk
--
Dear Heiko Schocher,
In message <1304408029-16785-1-git-send-email...@denx.de> you wrote:
> as checkpatch proposes to use strict_strtoul instead of
> simple_strtoul, introduce it.
>
> Ported this function from Linux 2.6.38 commit ID:
> 521cb40b0c44418a4fd36dc633f575813d59a43d
>
> Signed-off-by:
commit 262951(MMC: make b_max unconditional) missed to update fsl_esdhc.
Signed-off-by: Fabio Estevam
---
drivers/mmc/fsl_esdhc.c |1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index d2355be..ec953f0 100644
--- a/drivers
Hi,
2011/5/5 Simon Glass :
> This adds basic USB support for port 0. The other port is not supported by
> this CL.
>
> Signed-off-by: Simon Glass
> ---
> arch/arm/include/asm/arch-tegra2/tegra2.h | 2 +
> arch/arm/include/asm/arch-tegra2/usb.h | 217
> board/nvidia/c
Hi,
2011/4/21 Mike Frysinger :
> From: Cliff Cai
>
> When dealing with non-multipoint devices, if the software root hub code
> accepted the message, then we still need to process it normally. So only
> return quickly when the root hub skipped the message or is otherwise in
> an error state.
>
>
Hi,
2011/4/19 Zhao Chenhui :
> Convert the PCI base address into a virtual address.
>
> Signed-off-by: Zhao Chenhui
> Signed-off-by: Li Yang
> ---
> drivers/usb/host/ehci-pci.c | 5 ++---
> 1 files changed, 2 insertions(+), 3 deletions(-)
Applied to u-boot-usb.
Thanks.
Remy
___
Dear Luca Ceresoli,
In message <1305122401-14967-2-git-send-email-luca.ceres...@comelit.it> you
wrote:
> This removes the following checkpatch warning:
> - WARNING: line over 80 characters
>
> There are three such warnings left.
>
> The first is hard to fix with cosmetic-only changes without c
Dear Luca Ceresoli,
In message <1305122401-14967-3-git-send-email-luca.ceres...@comelit.it> you
wrote:
> This removes the following checkpatch errors:
> - ERROR: do not initialise globals to 0 or NULL
> - ERROR: spaces required around that '=' (ctx:VxV)
> - ERROR: that open brace { should be o
Dear Luca Ceresoli,
In message <1305122401-14967-4-git-send-email-luca.ceres...@comelit.it> you
wrote:
> This removes the following checkpatch issues:
> - ERROR: space prohibited after that open parenthesis '('
> - ERROR: space prohibited before that close parenthesis ')'
> - ERROR: space proh
Dear Luca Ceresoli,
In message <1305122401-14967-5-git-send-email-luca.ceres...@comelit.it> you
wrote:
> This removes the following checkpatch issues:
> - WARNING: braces {} are not necessary for single statement blocks
> - WARNING: braces {} are not necessary for any arm of this statement
>
>
Dear Luca Ceresoli,
In message <1305122401-14967-6-git-send-email-luca.ceres...@comelit.it> you
wrote:
> This removes the following checkpatch issues:
> - ERROR: "foo * bar" should be "foo *bar"
> - ERROR: "(foo*)" should be "(foo *)"
>
> Signed-off-by: Luca Ceresoli
> Cc: Wolfgang Denk
> Cc
Dear Luca Ceresoli,
In message <1305122401-14967-7-git-send-email-luca.ceres...@comelit.it> you
wrote:
> This removes the following checkpatch issue:
> - ERROR: return is not a function, parentheses are not required
>
> Signed-off-by: Luca Ceresoli
> Cc: Wolfgang Denk
> Cc: Ben Warren
> Cc:
Dear Luca Ceresoli,
In message <1305122401-14967-8-git-send-email-luca.ceres...@comelit.it> you
wrote:
> This removes the following checkpatch issues:
> - ERROR: switch and case should be at the same indent
> - WARNING: suspect code indent for conditional statements
> - WARNING: labels should
Dear Luca Ceresoli,
In message <1305122401-14967-9-git-send-email-luca.ceres...@comelit.it> you
wrote:
> This removes the following checkpatch issue:
> - ERROR: do not use assignment in if condition
>
> Signed-off-by: Luca Ceresoli
> Cc: Wolfgang Denk
> Cc: Ben Warren
> Cc: Mike Frysinger
>
Dear Michal Simek,
In message <1299594353-15887-2-git-send-email-mon...@monstr.eu> you wrote:
> Fix return values for initialize/init/recv/send functions
>
> Signed-off-by: Michal Simek
> ---
> drivers/net/xilinx_emaclite.c | 14 +++---
> 1 files changed, 7 insertions(+), 7 deletions(
Dear Che-liang Chiou,
In message you
wrote:
> GNU Makefile have two flavors of variables, recursively expanded that is
> defined by using '=', and simply expanded that is defined by using ':='.
>
> The bug is caused by using recursively expanded flavor for BIN and SREC.
> As you can see below,
Dear Michal Simek,
In message <1299660422-25452-1-git-send-email-mon...@monstr.eu> you wrote:
> Add the first axi_ethernet driver for little-endian Microblaze.
>
> Signed-off-by: Michal Simek
>
> ---
> v2:
> - Fix return addreses
> - Fix NULL pointer defer for priv structure
>
> v3:
> - Freein
Dear =?UTF-8?q?Fran=C3=A7ois=20Revol?=,
In message <1300482183-17836-1-git-send-email-re...@free.fr> you wrote:
> - don't include config.h when building with host cc,
> - HOSTCFLAGS was defined with the wrong name, so wasn't used,
> - make sure make finds sources outside of tools/.
>
> Signed-off
Dear Torkel,
In message Mike Frysinger
wrote:
> the commit below slipped in without me noticing ... could you please
> revert the change to this header and only enable support for this OS
> in whatever boards you're using ? especially considering this OS only
> works for specific setups (phones
Dear Dirk Eibach,
In message <1303116194-32076-1-git-send-email-eib...@gdsys.de> you wrote:
> This patch adds support for the National LM64 temperature
> sensor with integrated fan control to lm63.c.
> Main difference between LM63 and LM64 is 16°C offset in sensor
> readings.
>
> Signed-off-by:
Dear Michael Jones,
In message <1303200753-9360-1-git-send-email-michael.jo...@matrix-vision.de>
you wrote:
> commit 25ddd1fb0a2281b182529afbc8fda5de2dc16d96 left remnants of
> many comments about CONFIG_SYS_GBL_DATA_SIZE.
>
> Signed-off-by: Michael Jones
> ---
> include/configs/CPC45.h
Dear Joakim Tjernlund,
In message <1303731583-11353-1-git-send-email-joakim.tjernl...@transmode.se>
you wrote:
> Noticed while building all of mpc8xx. Also
> constify usage string in timer.c
> Warnings fixed are:
> timer.c: In function 'timer':
> timer.c:189: warning: format not a string literal
Dear Macpaul Lin,
In message <1303817387-9472-1-git-send-email-macp...@andestech.com> you wrote:
> ftahbc020s.h provides basic definitions of this controller
> to help a SoC which use this AHB Controller could
> do scalable software settings in lowlevel_init.S.
>
> Signed-off-by: Macpaul Lin
> -
Dear Macpaul Lin,
In message <1303817387-9472-2-git-send-email-macp...@andestech.com> you wrote:
> Support registers definitions of ftsdmc021 SDRAM controller.
>
> Signed-off-by: Macpaul Lin
> ---
> Changes for v2:
> - Add __ASSEMBLY__ protecton to register offset for supporting lowlevel_init
>
Dear Detlev Zundel,
In message <1303917959-32324-1-git-send-email-...@denx.de> you wrote:
> Now that we have the documentation, the code should be changed to reflect
> it ;)
>
> Asd far as I can see, these are the places where HW_WATCHDOG is used
> instead of WATCHDOG:
>
> arch/blackfin/cpu/blac
Dear =?UTF-8?q?Eric=20B=C3=A9nard?=,
In message <1303935504-4918-1-git-send-email-e...@eukrea.com> you wrote:
> - remove from boards.cfg
> - add to doc/README.scrapyard
>
> Signed-off-by: Eric Bénard
> ---
> boards.cfg |1 -
> doc/README.scrapyard |1 +
> 2 files changed, 1 i
Dear Macpaul Lin,
In message <1303957715-10873-1-git-send-email-macp...@andestech.com> you wrote:
> cmd_bdinfo.c: clean up with 2.6.38 checkpatch.pl
>
> Signed-off-by: Macpaul Lin
> ---
> Changes for v2:
> - Correct the subject field to single patch.
> Changes for v3:
> - 405XX, 440XX, XILINX_
Dear Ben Gardiner,
In message
<787a04417ee0eb01c6eb3a7a1edff7ee9a8f825e.1304008866.git.bengardi...@nanometrics.ca>
you wrote:
> The bdinfo command prints the relocaddr on ARM as it does
> on PPC.
>
> Update the debugging instructions for arm relocation to
> reflect this fact rather than requiri
Dear Ben Gardiner,
In message
<713eaea232693cd6775d409b17c2e187328d1598.1304008866.git.bengardi...@nanometrics.ca>
you wrote:
> When your emulator is connected at reset (or is used to load u-boot)
> it is possible to get the relocation address from the parameter
> passed to relocate_code() inste
Dear Ben Gardiner,
In message
<787a04417ee0eb01c6eb3a7a1edff7ee9a8f825e.1304024417.git.bengardi...@nanometrics.ca>
you wrote:
> The bdinfo command prints the relocaddr on ARM as it does
> on PPC.
>
> Update the debugging instructions for arm relocation to
> reflect this fact rather than requiri
Dear Ben Gardiner,
In message
<7ed11e02b0db005231f5c6baa299761f3aa04f6f.1304024417.git.bengardi...@nanometrics.ca>
you wrote:
> When your emulator is connected at reset (or is used to load u-boot)
> it is possible to get the relocation address from the gd->relocaddr
> since gd is always in r8 (o
On Thursday, May 12, 2011 16:52:47 Wolfgang Denk wrote:
> Mike Frysinger wrote:
> > the commit below slipped in without me noticing ... could you please
> > revert the change to this header and only enable support for this OS
> > in whatever boards you're using ? especially considering this OS onl
Dear Macpaul Lin,
In message <1304321336-16693-1-git-send-email-macp...@andestech.com> you wrote:
> Faraday's ftide020_s is an IDE-AHB controller for SoC design.
> This patch add the u-boot driver (PIO) of ftide020 ATA (IDE) driver.
> IDE commands include read, info, and other functions has been i
Dear Macpaul Lin,
In message <1304324251-15293-1-git-send-email-macp...@andestech.com> you wrote:
> Avoid relocation problem by fix global declaration.
>
> Signed-off-by: Macpaul Lin
> ---
> Changes for v2:
> - Remove assembly register offsets for support lowlevel_init.S.
> - The nested stru
1 - 100 of 139 matches
Mail list logo
