Dear John Rigby, In message <1305187511-8455-1-git-send-email-john.ri...@linaro.org> you wrote: > Two new options: > > CONFIG_PL011_SERIAL_RLCR > > Some vendor versions of PL011 serial ports (e.g. ST-Ericsson U8500) > have separate receive and transmit line control registers. Set > this variable to initialize the extra register. > > CONFIG_PL011_SERIAL_FLUSH_ON_INIT > > On some platforms (e.g. U8500) U-Boot is loaded by a second stage > boot loader that has already initialized the UART. Define this > variable to flush the UART at init time. > empty fifo on init > > Signed-off-by: John Rigby <john.ri...@linaro.org> > Signed-off-by: Rabin Vincent <rabin.vinc...@stericsson.com> > --- > v2: No changes > v3: Enable changes with new CONFIG_* options instead of platform. > Document new CONFIG_* options in README. > v4: Added delay before writing to RLCR. > Removed Rabin as author at his request. > v5: Fixed commit message p1011 to pl011 > > README | 12 ++++++++++++ > drivers/serial/serial_pl01x.c | 30 +++++++++++++++++++++++++++--- > drivers/serial/serial_pl01x.h | 4 ++++ > 3 files changed, 43 insertions(+), 3 deletions(-)
Applied, thanks. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "We don't have to protect the environment -- the Second Coming is at hand." - James Watt _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
