> -----Original Message----- > From: Valentin Longchamp [mailto:valentin.longch...@keymile.com] > Sent: Wednesday, May 04, 2011 9:24 PM > To: u-boot@lists.denx.de > Cc: holger.bru...@keymile.com; Prafulla Wadaskar; Valentin Longchamp; > Wolfgang Denk; Detlev Zundel > Subject: [PATCH v3 5/8] arm/km: add second serial interface for kirkwood > > From: Holger Brunck <holger.bru...@keymile.com> > > Signed-off-by: Holger Brunck <holger.bru...@keymile.com> > Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com> > Acked-by: Heiko Schocher <h...@denx.de> > cc: Wolfgang Denk <w...@denx.de> > cc: Detlev Zundel <d...@denx.de> > cc: Prafulla Wadaskar <prafu...@marvell.com> > --- > Changes for v2: > - split up first large patch series to three independent smaller > patch series > > include/configs/km_arm.h | 6 ++++++ > 1 files changed, 6 insertions(+), 0 deletions(-) > > diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h > index d27a630..d2669d3 100644 > --- a/include/configs/km_arm.h > +++ b/include/configs/km_arm.h > @@ -92,6 +92,7 @@ > #define CONFIG_SYS_NS16550_REG_SIZE (-4) > #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK > #define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE > +#define CONFIG_SYS_NS16550_COM2 KW_UART1_BASE > > /* > * Serial Port configuration > @@ -136,7 +137,12 @@ > > #define BOOTFLASH_START 0x0 > > +/* Kirkwood has two serial IF */ > +#if (CONFIG_CONS_INDEX == 2) > +#define CONFIG_KM_CONSOLE_TTY "ttyS1" > +#else > #define CONFIG_KM_CONSOLE_TTY "ttyS0" > +#endif > > /* size in bytes reserved for initial data */ >
Acked-By: Prafulla Wadaskar <prafu...@marvell.com> Regards.. Prafulla . . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
