> -----Original Message----- > From: Valentin Longchamp [mailto:valentin.longch...@keymile.com] > Sent: Wednesday, May 04, 2011 9:24 PM > To: u-boot@lists.denx.de > Cc: holger.bru...@keymile.com; Prafulla Wadaskar; Valentin Longchamp; > Heiko Schocher; Wolfgang Denk; Detlev Zundel > Subject: [PATCH v3 2/8] arm/km: move CONFIG_EXTRA_ENV_SETTINGS from > board to km_arm file > > Since all the boards define the same env settings, this simplifies > the board files. > > Signed-off-by: Valentin Longchamp <valentin.longch...@keymile.com> > cc: Holger Brunck <holger.bru...@keymile.com> > cc: Heiko Schocher <h...@denx.de> > cc: Wolfgang Denk <w...@denx.de> > cc: Detlev Zundel <d...@denx.de> > cc: Prafulla Wadaskar <prafu...@marvell.com> > --- > changes for v3: > - this patch is new in the series > > include/configs/km_arm.h | 15 +++++++++++++++ > include/configs/mgcoge2un.h | 15 --------------- > include/configs/suen3.h | 15 --------------- > include/configs/suen8.h | 15 --------------- > 4 files changed, 15 insertions(+), 45 deletions(-) > > diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h > index 70113d4..313a7f8 100644 > --- a/include/configs/km_arm.h > +++ b/include/configs/km_arm.h > @@ -242,6 +242,21 @@ int get_scl (void); > "sf write ${u-boot_addr_r} 0 ${filesize};" \ > "spi off\0" > > +/* > + * Default environment variables > + */ > +#define CONFIG_EXTRA_ENV_SETTINGS \ > + CONFIG_KM_DEF_ENV \ > + "newenv=setenv addr 0x100000 && " \ > + "i2c dev 1; mw.b ${addr} 0 4 && " \ > + "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ > + " ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && " \ > + "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ > + " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \ > + "rootpath=/opt/eldk/arm\0" \ > + "EEprom_ivm=" KM_IVM_BUS "\0" \ > + "" > + > #if defined(CONFIG_SYS_NO_FLASH) > #define CONFIG_KM_UBI_PARTITION_NAME "ubi0" > #undef CONFIG_FLASH_CFI_MTD > diff --git a/include/configs/mgcoge2un.h b/include/configs/mgcoge2un.h > index d3c7bdc..876ac34 100644 > --- a/include/configs/mgcoge2un.h > +++ b/include/configs/mgcoge2un.h > @@ -47,19 +47,4 @@ > #define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ > #define KM_ENV_BUS "pca9547:70:d" /* I2C2 (Mux-Port 5)*/ > > -/* > - * Default environment variables > - */ > -#define CONFIG_EXTRA_ENV_SETTINGS \ > - CONFIG_KM_DEF_ENV \ > - "newenv=setenv addr 0x100000 && " \ > - "i2c dev 1; mw.b ${addr} 0 4 && " \ > - "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ > - " ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && " \ > - "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ > - " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \ > - "rootpath=/opt/eldk/arm\0" \ > - "EEprom_ivm=" KM_IVM_BUS "\0" \ > - "" > - > #endif /* _CONFIG_MGCOGE2UN_H */ > diff --git a/include/configs/suen3.h b/include/configs/suen3.h > index 2b6f19e..7d7a4ff 100644 > --- a/include/configs/suen3.h > +++ b/include/configs/suen3.h > @@ -46,19 +46,4 @@ > #define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ > #define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/ > > -/* > - * Default environment variables > - */ > -#define CONFIG_EXTRA_ENV_SETTINGS \ > - CONFIG_KM_DEF_ENV \ > - "newenv=setenv addr 0x100000 && " \ > - "i2c dev 1; mw.b ${addr} 0 4 && " \ > - "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ > - " ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && " \ > - "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ > - " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \ > - "rootpath=/opt/eldk/arm\0" \ > - "EEprom_ivm=" KM_IVM_BUS "\0" \ > - "" > - > #endif /* _CONFIG_SUEN3_H */ > diff --git a/include/configs/suen8.h b/include/configs/suen8.h > index 3f60bc3..28c8a0b 100644 > --- a/include/configs/suen8.h > +++ b/include/configs/suen8.h > @@ -47,19 +47,4 @@ > #define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ > #define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/ > > -/* > - * Default environment variables > - */ > -#define CONFIG_EXTRA_ENV_SETTINGS \ > - CONFIG_KM_DEF_ENV \ > - "newenv=setenv addr 0x100000 && " \ > - "i2c dev 1; mw.b ${addr} 0 4 && " \ > - "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ > - " ${addr} " xstr(CONFIG_ENV_OFFSET) " 4 && " \ > - "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ > - " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \ > - "rootpath=/opt/eldk/arm\0" \ > - "EEprom_ivm=" KM_IVM_BUS "\0" \ > - "" > - > #endif /* _CONFIG_SUEN8_H */ > --
Acked-By: Prafulla Wadaskar <prafu...@marvell.com> Regards.. Prafulla . . _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
