Wait a few day. Asis.com, the local internet service is broken and has been
for 4 days.
You can call Derik at 707-923-3507
David katz
-Original Message-
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Mark Dickson
Sent
input voltage of the inverter. This is simpler and less expensive that
trying to synchronize the turbine to the grid.
Call Derik Veenhuis at Hydroinduction Power - 707 925-3507. He has done
this many times.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Has anyone tried string sizing 60 cell modules to an SMA 700. It is not
possible.
David Katz
Founder & CTO
AEE Solar
T(707) 825-1200
C(831) 325-9582
F(707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesolar.com <http://www.aeesolar.com/>
On 11/15/201
systems start at $495 retail, including the equipment and 5 years of
monitoring
http://solarlog-web.net
David
David Katz
Founder & CTO
AEE Solar
T(707) 825-1200
C(831) 325-9582
F(707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesolar.com <http://www
systems start at $495
retail, including the equipment and 5 years of monitoring
http://solarlog-web.net
David
David Katz
Founder & CTO
AEE Solar
T(707) 825-1200
C(831) 325-9582
F(707) 825-1202
dk...@aeesolar.com<mailto:da...@aeesolar.com>
www.aeesolar.com<http://www
Title: David Katz
Lee,
We never had enough interest to warrant getting a UL listing on the
product. Is it for grid-tie or off-grid?
David
David Katz
Founder & CTO
AEE S
Title: David Katz
Backwoods Solar still stocks Light-it products
David Katz
Founder & CTO
AEE Solar
T(707) 825-1200
C(831) 325-9582
F(707) 825-1202
Title: David Katz
Mick,
Photowatt's operation in the US was owned by ATS. They are now
producing modules in Ontario Canada.
ATS Automation
730 Fountain Street North
Building #2
Cambridge, ON
N3H 4R7 Canada
Tel: (519) 650
og
run of wire, it would get over 128 when the inverters were putting out
power. This made it go on and off every 5 minutes. I changed the
parameters through the Sunny WebBox and set the AC cut-off to 135 and
the problem went away.
David
David Katz
Founder & CTO
AEE Solar
T(707) 825-12
frame to add extra strength.
David Katz
David Katz
Founder & CTO
AEE Solar
T(707) 825-1200
C(831) 325-9582
F(707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesolar.com <http://www.aeesolar.com/>
___
List s
I have been using a 10 watt module without a charge control to charge my
generator cranking battery for more than 5 years and i have never had to
add water.
David
David Katz
Founder & CTO
AEE Solar
T(707) 825-1200
C(831) 325-9582
F(707) 825-1202
dk...@aeesolar.com <ma
My favorite is AET.
David
David Katz
Founder & CTO
AEE Solar
T(707) 825-1200
C(831) 325-9582
F(707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesolar.com <http://www.aeesolar.com/>
On 4/16/2011 8:38 PM, Nick Vida wrote
hey wrenches.
i am looking a
/catalog/swea-watt-grid-inverter-starter-wind-p-39.html
Let me know if you try it.
David
David Katz
Founder & CTO
AEE Solar
T(707) 825-1200
C(831) 325-9582
F(707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesolar.com <http://www.aeesolar.com/>
On 5
Brian,
I have that setup in the old AEE trailer. We used it for charging a
plug in hybrid for a race. When ever the car was not plugged in, power
went backwards through the SW4024 and charged batteries. The waveform
worked fine with and SMA 1800, which has a 120 VAC output.
David
David
SunnyIsland. When the charger was unplugged, the
array charged the batteries through the SunnyBoy and SunnyIsland. This
allowed the batteries to absorb the array output between charges.
David Katz
___
List sponsored by Home Power magazine
List Address: RE
then they dropped to 0%.
The SMA's were the first 600 volt inverters to be used in the US. Before that,
everything was 48 volt.
Regards,
David Katz
AEE Solar
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jim MacDonald
Sent:
. They may be a good
choice if the system is under 100 amp hours.
David Katz
AEE Solar
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Chris Daum
Sent: Thursday, September 22, 2011 8:35 AM
To: 'RE-wrenches'
Subject: [RE-wren
Hi Allan
You could credit him the interest on the $600 he loaned you.
David
From: Allan Sindelar [mailto:al...@positiveenergysolar.com]
Sent: Thursday, October 06, 2011 03:32 AM
To: RE-wrenches
Subject: [RE-wrenches] What's the right action?
OK, here's one way off the beaten path.
I live in an
How old are the batteries? Did you do the hydrometer reading, or are you
relying on info from the customer. It is easy toi misread a hydrometer. When
was the last time the batteries were at 30+ volts?
David Katz
From: Ron Young [mailto:solarea...@solareagle.com]
Sent: Saturday, October 08, 2011
If it takes 2 hours of charging to get to 25.8, the batteries are very
discharged. It should be that high as soon as you start charging with a decent
charger.
David Katz
From: Ron Young [mailto:solarea...@solareagle.com]
Sent: Saturday, October 08, 2011 11:01 AM
To: RE-wrenches
Subject: [RE
ter 2 hours of charging if it
had even a 50% charge.
David Katz
From: Ron Young [mailto:solarea...@solareagle.com]
Sent: Saturday, October 08, 2011 11:31 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] intermittent battery problem
There is no amp hour meter in the system. The dump load on the Wh
them they need
to run the generator for 40 hours to catch up. Customers never like to hear
that. A trimetric will help them keep up.
David Katz
From: Ron Young [mailto:solarea...@solareagle.com]
Sent: Saturday, October 08, 2011 06:42 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] intermittent
Next year it will be in Orlando.
David Katz
- Original Message -
From: Jesse Dahl [mailto:dahlso...@gmail.com]
Sent: Monday, October 10, 2011 07:06 AM
To: RE-wrenches
Subject: Re: [RE-wrenches] Solar gathering?
Thanks for the advice! Dallas here I come...next year!
Jesse
Sent from my
y was probably
because of the 800 watt PV array and light loads. It would be interesting to
do a real equalization and a capacity test to see what is left of the batteries.
David
David Katz
CTO & Founder
AEE Solar Inc
P: 707 825-1200
F: 707 825-1202
dk...@aeesolar.com
www.aeesolar.com
From: re
Mike
Michael D. Matz
PHOTON USA Corp.
514 Bryant Street
San Francisco, California 94107, USA
David Katz
CTO & Founder
AEE Solar Inc
P: 707 825-1200
F: 707 825-1202
dk...@aeesolar.com
www.aeesolar.com
___
List sponsored by Home Power magazine
Lis
Wrenches,
I just picked up 32 Sharp 62 watt roofing shingles that I want to install on my
barn since it is time for a new roof. Has anyone had any experience putting
these modules on a roof in conjunction with cement tiles, which sharp's data
sheet says they integrate with.
David Katz
The Heart Transverter can be grid-tied with or without a battery, but it is not
through UL yet.
David Katz
- Original Message -
From: b...@midnitesolar.com [mailto:b...@midnitesolar.com]
Sent: Thursday, October 27, 2011 12:27 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Battery / no
Conrad,
The inline fuse for PV cables is made by Shoals Technologies.
http://shoals.com/?page_id=100026
David Katz
CTO & Founder
AEE Solar Inc
P: 707 825-1200
F: 707 825-1202
dk...@aeesolar.com
www.aeesolar.com
From: re-wrenches-boun...@lists.re-wrenches.org
[mailto:re-wrenches-
AC breaks, the grid tie
inverter goes off for 5 minutes. The loads operate on the Sw, pulling the
battery down, which closes the relay and the cycle repeats.
David Katz
- Original Message -
From: Nathan Jones [mailto:solardud...@yahoo.com]
Sent: Tuesday, November 22, 2011 07:10 AM
To: re
diversion load and let the
diversion controller do the fine tuning. Let me know if that does not make
sense.
David Katz
- Original Message -
From: Larry Crutcher, Starlight Solar Power Systems
[mailto:la...@starlightsolar.com]
Sent: Tuesday, November 29, 2011 05:35 PM
To: RE-wrenches
why I suggested
the the relay controlled load be 50 to 75% of the pwm diversion load, so that
whenever it turns on the pwm controller will be working, too.
David
David Katz
CTO & Founder
AEE Solar Inc
P: 707 825-1200
F: 707 825-1202
dk...@aeesolar.com
www.aeesolar.com
From: re-wrenches-
gt; Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.ht
s.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenche
Aaron,
I have seen large pole mounts in Portugal in an above ground ring of
concrete 3 feet high and 6 feet in diameter. I would get an engineers
opinion on the size but that would be easier than digging a hole in rock.
David Katz
On Thu, Apr 12, 2018 at 6:27 AM Aaron Mandelkorn wrote:
> Hi
g/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
> --
David Katz Sent from Gmail Mobile
___
List sponsored by Redwood Alliance
L
you need 56 volts from two 60 cell modules it will be a
much lower current than peak current. The modules will be running closer to
open circuit voltage.
If you battery reaches full charge at 48 volts, it should charge fine, but
you will have other bigger problems.
David Katz
On Tue, Sep 11, 2018
are isolated. And they only cost a few dollars.
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F152134115704
David Katz
On Sat, Sep 15, 2018 at 7:58 AM Drake
wrote:
> Since Solar Converters seems to have evaporated, I'm not sure where to
> look for a
K-2 in Henderson NV has 12v Lion batteries with BMS
David Katz
On Sat, Oct 27, 2018 at 8:19 AM
wrote:
>
> An off grid system owner contacted me, looking for a L-ion battery for a
> 12 V system. Does such a thing exist?
>
> Th
cells exploded when the water level got below the plates.
I would suggest L-ion batteries instead.
David Katz
On Wed, Nov 21, 2018 at 10:37 AM Ray wrote:
> Charge efficiency is really low, Charging parameters can be hard to get
> right, Voltage is not stable under heavy loads, and th
Grundfos and Lorentz.
David Katz
On Sat, Jan 5, 2019 at 9:06 AM William Dorsett
wrote:
> Jay, thanks for your response. Do you have or anyone close, actual
> experience with Hober? At 230 ft, plus as Dan suggested, we have to add
> the head to the storage tank. At that depth ShurFlo
Does anyone have experience with Heliene modules? Are they a good USA made
module?
Thanks
David Katz
Backwoods Solar
--
David Katz Sent from Gmail Mobile
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change
make
an engineer happy. That one definitely looks home made.
David Katz
Tamarack Solar Products
On Thu, Mar 14, 2019 at 1:12 PM Timothy Econopouly <
tim.econopo...@suncommon.com> wrote:
> They look like vintage Tamarack or MT Solar top of pole mounts
>
> On Thu, Mar 14, 2019 at 3:3
have
modbus output.
David Katz
On Fri, May 3, 2019 at 2:47 PM Andrew Truitt wrote:
>
> Wrenches - I have an opportunity to take possession of some lightly used 2
> kWh Lishen LFP battery packs for next to nothing. What's the catch? No
> BMS. Anyone have any experience retrofi
Snap Fan makes great ones. Snap-fan.com
David Katz
On Fri, May 17, 2019 at 5:40 AM David Palumbo wrote:
> I have an old off grid customer looking for a greenhouse fan, about 20”,
> to run direct off an old 48w 12v module.
>
>
>
> Backwoods is listing DC Super Fans that say bat
The sentence “25KW per hour“ does not make sense. Do they mean 25KWh per
hour? That would be 600 KWh per day! That would require over 200KW of PV.
David Katz
On Thu, Sep 5, 2019 at 3:33 PM Dave Angelini Offgrid Solar <
offgridso...@sti.net> wrote:
> I often find that numbers like 25KW
p://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.
ce, to me it
> sounds like poor quality control or is internally considered acceptable.
> Jerry
>
> On Mon, Nov 18, 2019 at 7:04 AM David Katz
> wrote:
>
>> Here is a response from Jinko:
>>
>>
>>
>> On Mon, Nov 18, 2019 at 7:39 AM Jerry Shafer
>&
Tamarack Solar Products has Top-of-Pole mounts with stamped engineering
drawings for that wind speed, but only up to 6 modules per mount
David Katz
On Wed, Dec 11, 2019 at 8:35 AM Lou Russo wrote:
> Aloha Wrenches,
>
> I have a project that I originally called out Preformed Line P
of which battery functions best with
the Outback system.
Thanks,
David Katz
___
List sponsored by Redwood Alliance
List Address: RE-wrenches@lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cg
If you are working in Africa, Asia, or Europe the AC output is 380-400
3-phase or 230 1-phase without the 120V center tap.
If you are working on a country that used to be a puppet government of the
USA it will be 120, 240 480 etc.
David Katz
On Mon, Apr 13, 2020 at 1:37 PM Kirk Herander wrote
://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or upd
Hi Kirk,
Check out DiamondPiers. They say that they are equal to a 24" diameter, 5
foot deep concrete pier and require no concrete. You just need a
jackhammer type tool. I have not tried them. They could be good for
multipole ground mounts
https://www.diamondpiers.com/how-it-works
David
> Check out or update participant bios:
> www.members.re-wrenches.org
>
> ___
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://
Wrenches,
Here is a really scary link. the guy is selling a book for $50 that
shows you how you can build your own PV module for $125.
http://www.power4home.com/index.php?hop=roeib
Cheers
David Katz
___
List sponsored by Home Power magazine
List
might have to buy these to appease the system owner who is not getting
what they expect from their system.
They Tigo converter is very interesting and has an MSRP of $56. At this
price it will make some sense.
Cheers,
David
David Katz
President
AEE Solar
1155 Redway Drive
P.O. Box 339
Tump,
Mitsubishi makes the modules for Shuco with the cross bar. The sell the
same module directly. REC modules are also rated at 5400pa. they do it
with thicker glass. Those Norwegians know snow load.
David
David Katz
President
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA
You can use a standard 120 vac kwh meter in an RV base and add an
extension cord cut in half for input and output.
David Katz
President
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
da...@aeesolar.com <mailto:da...@aeesolar.
I think Open Energy is in bankruptcy now.
David Katz
President
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
da...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesolar.com <http://www.aeesolar.com>
DISCLAIMER:
This c
This is a stupid idea. It is probably a hoax.
David
David Katz
President
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
da...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesolar.com <http://www.aeesolar.com>
DISC
considering there will be some voltage
drop in the wiring. There is no feature for equalization to worry about
with sealed batteries.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk
Mick,
If these modules have failed, it is a good bet that they are Kyocera
J-51s
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesol
I am certainly interested in which wholesale distributors offer good
service, if any.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.
Allan
Ask Greg Thomas at Outback. He wrote the software.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesolar.com <http://www.aee
silicon made in the US
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesolar.com <http://www.aeesolar.com/>
DISCLAIMER:
This c
though.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesolar.com <http://www.aeesolar.com/>
DISCLAIMER:
This communication, along
Lee
I would be inclined to use groups of 4 modules wired for 24 volts
connected to an Enphase inverter. This will give you less problem with
mismatch loss. 256 watts is high but they are probably a bit lower in
output that that.
David
David Katz
Chief Technical Officer
AEE Solar
1155
Has anyone tried the free online sizing software at
http://www.solardesigntool.com/overview.html
They have a pay version too.
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com
Evergreen is making an ES-C series 80 watt and 120 watt modules in
China. They do not have the same dimensions as the old EC series. AEE
will have them after the new year.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825
ss
a single phase. you may be able to stack them at 240 and only connect
one of the inputs to AC in.
good luck.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com <mailto:da...@aees
u are definitely better off with more modules on a fixed
array in an off grid situation because you always need more power in the
winter when the tracker is least effective.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825
You can get that from AEE - their part number 053-07819. it is on page
153 of the catalog. It is made of a 6 space, 3 phase indoor load
center, a QO160 and a QO260 and the QD2DTI interlock which is available
from AEE - 053-02094 in case you want to buy the part separately.
David
David Katz
I am pretty sure that tempered glass with shatter as soon as you cut
into the edge. That is the nature of tempered glass.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com
Backwoods Solar has them.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesolar.com <http://www.aeesolar.com/>
DISC
I am pretty sure that AEE has several hundred Mitsubishi UD185MF5
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesolar.com <http://www.aee
for the wind generator. The brochure claims 2500 KW
per year in calss 4 winds. I list them as vapor ware for now. At least
until someone calls me back.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825
Hi Daryl
Ed Eaton (SEI Instructor) builds and sell a line of LED lights for 12,
24 and 48 VDC. - haree...@yahoo.com is his email address.
David Katz
___
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
The MC3 tool works great on the Amphenol pins. The MC4 tool definitely
will not work
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesol
Derik at HI Power hydro has done several of these with grid tie DC
voltage with diversion.
You can reach him at de...@asis.com
http://www.hipowerhydro.com/
cheers,
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax
Allan,
Are you running 100+ volts DC through a Square D breaker? They are not
rated for anything above 48VDC. Midnite Solar makes a manual transfer
switch that can be fitted with 150 VDC breakers. That may be a better
choice.
David
David Katz
Chief Technical Officer
AEE Solar
1155
Hi Jeff O,
What do you use for power for the relay coil?. The pump can run on
voltage up to 300 VDC. I suppose you could tap the output of one module
or add a separate small module.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel
Cheers,
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesolar.com <http://www.aeesolar.com/>
DISCLAIMER:
This communication, al
I still have some old Xantrex STXR inverters that work on 48 volts and i
can give him a deal on a Beacon 48 volt grid-tie inverter too. The
modules are probably safe at 48 volts. Give him my number. i have a
bridge to sell him, too.
David
David Katz
Chief Technical Officer
AEE Solar
Bill,
Sunpower likes to sell overpriced, private labeled inverters along with
their modules. The make installers who want to use their modules, but
"Sunpower" inverters.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel
Marco,
When you are drawing 120 VAC, the neutral is a current carrying conductor.
David
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.com>
www.aeesol
I have an SMA 2500U in my bedroom outside wall and Tigo Maximizers on
the modules and have noise on AM radio in the bedroom in the daytime.
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk
Whoops - I meant to say *_no_* noise in the thread below. AM radio works
perfectly.
David
AEE Solar
David Katz
Chief Technical Officer
AEE Solar
1155 Redway Drive
P.O. Box 339
Redway, CA 95560
Tel (707) 825-1200
Fax (707) 825-1202
dk...@aeesolar.com <mailto:da...@aeesolar.
Title: David Katz
Wrenches
The only time I ever see L16s last this long is when they are
over-sized so much that they can lose half of their capacity and still
satisfy the customer. Batteries are considered worn out when they only
hold 80% of their original capacity. If the customer really
ffer much motor starting surge.
David Katz
Sent from my iPhone
On Aug 9, 2013, at 8:08 AM, "RE Ellison"
mailto:reelli...@gmail.com>> wrote:
Do they have a charger or just a CCC inverter?
Harbor freight sells units like this.
Unless they are a continuing customer or a friend, I
Greg
I have been using one for over a year with 4.5kw of modules. It works great.
David Katz
Sent from my iPhone
On Sep 22, 2013, at 5:03 PM, "Greg Egan"
mailto:g...@remotepowerinc.com>> wrote:
Friends,
Have a customer that needs to put the array 420' from the batteries
My nissan leaf uses about 25 kW-h to go 70 miles.
David Katz
Sent from my iPhone
On Sep 27, 2013, at 1:20 PM, "William Miller"
mailto:will...@millersolar.com>> wrote:
Friends:
Have any of you researched the energy usage for an electric car? The car in
question is a Tesla S
You can buy a 24 volt DC MIG welder from ReadyWelder.
David Katz
Sent from my iPhone
On Nov 23, 2013, at 10:37 AM, "Allan Sindelar"
mailto:al...@positiveenergysolar.com>> wrote:
Forwarding from Windy.
Original Message
Sure you can solar weld! Afterall,
Mark,
I believe the Midnite Classic has this feature built in. Check with them.
David Katz
From: Mark Dickson [mailto:m...@oasismontana.com]
Sent: Monday, January 16, 2012 10:00 AM
To: 'RE-wrenches'
Subject: [RE-wrenches] Shedding ice
I recall a conversation a while back about the p
slightly less then spec says at 24
volt, but since it is positive displacement it will pump fine at the low
voltage.
David Katz
CTO & Founder
AEE Solar Inc
P: 707 825-1200
F: 707 825-1202
dk...@aeesolar.com
www.aeesolar.com
DISCLAIMER:
This communication, along with any documents, files or attachm
Hi Jay,
Powerstream has complete units with leads so you don't need to get an enclosure
or solder anything. http://www.powerstream.com/dcdc.htm
They have a 24 vdc to 9 vdc for $31.
Kirt Jensen has taken good care of me there.
David
David Katz
CTO & Founder
AEE Solar Inc
P: 707 825-12
William
I have a grid tie system with a Outback Radian and Xantrex 600 volt charge
controller with 4kw of modules and it sells back flawlessly. I have
revenue-grade monitoring on the system and I am very happy with the output.
David Katz
Sent from my iPhone
On Apr 16, 2012, at 6:51 AM
you choose for revenue-grade monitoring?
>
> Comments?
>
> Bill Loesch
> Solar 1 - Saint Louis Solar
> 314 631 1094
>
>
> On 18-Apr-12 4:01 AM, David Katz wrote:
>> William
>> I have a grid tie system with a Outback Radian and Xantrex 600 volt charge
>&
Lars
I have been using the Xantrex 600 volt charge controller for 6 months. It
works great. It is controlling 4kW coming in at 350 vdc charging a 48 volt
battery. You need to have the remote to set it up and monitor its output.
David Katz
Sent from my HTC smartphone on the Now Network from
I would check each string. I have seen many failed 120 watt Kyocera modules.
They had a delamination problem.
David Katz
Sent from my HTC smartphone on the Now Network from Sprint!
- Reply message -
From: "Eric Stikes"
To: "RE-wrenches"
Subject: [RE-wrenches]
The SW requires and inductor to operate in current mode for grid tie. Maybe
someone remembers the part number. It may be hard to find.
David Katz
Sent from my HTC smartphone on the Now Network from Sprint!
- Reply message -
From: "Bob Clark"
To: "re-wrenches@lists.
it worked
great. It was a great way to get rid of pallets.
Unfortunately it was most needed whenever there was not much sun, so it
definitely increased generator run time.
David Katz
Sent from my HTC smartphone on the Now Network from Sprint!
- Reply message -
From: "Ron @ earth
1 - 100 of 157 matches
Mail list logo
