I have had great luck using cheap LED drivers.  They say 110-240 vac input
but they rectify the input to DC.  I have used them to run 12 and 24 volt
stuff off of 48 vdc and even 400 vdc. They operate down to about 35 volts
dc. They are available in a variety of output voltage and current. And they
are isolated.   And they only cost a few dollars.
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F152134115704
David Katz

On Sat, Sep 15, 2018 at 7:58 AM Drake <drake.chamber...@redwoodalliance.org>
wrote:

> Since Solar Converters seems to have evaporated, I'm not sure where to
> look for a 48 to 24 V DC to DC converter. Samplex has 24 to 12. It seems
> like someone mentioned a Canadian company that makes these.
>
> I need to step down power from a 48 V battery bank to power El Sid pumps
> for an offgrid hydronic  heating system.
>
> Thanks,
>
> Drake
>
> Drake Chamberlin
>
>
>
>
>
> *Athens Electric LLC OH License 44810 CO License 3773 NABCEP Certified
> Solar PV 740-448-7328 *http://athens-electric.com/
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches@lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
> --
David Katz Sent from Gmail Mobile
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches@lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: 
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org

Reply via email to