[RE-wrenches] wind scam?

2010-07-24 Thread Chris Daum
With all the alleged information on their web site, I couldn't find any power curves. And their "contact us" form was only for folks who had purchased their turbines. Let the buyer beware! Chris Daum Oasis Montana Inc. _ From: re-wrenches-boun...@lists.re-wrenches

[RE-wrenches] The perfect solar ready roof

2010-10-19 Thread Chris Daum
ggest--and would you beef up the wood to lag into? Thanks for all your input. Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: h

[RE-wrenches] The perfect solar ready roof

2010-10-20 Thread Chris Daum
g into the roof pretty much everywhere. And building inspector? They are sort of a joke around here. We refer to it sometimes as the state of Montucky..... Chris Daum Oasis Montana Inc. _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On

Re: [RE-wrenches] The perfect solar ready roof

2010-10-20 Thread Chris Daum
re those (sort of) particle board I-beams covered with 1/2" plywood (and shingles). What's the best metal roofing you could suggest--and would you beef up the wood to lag into? Thanks for all your input. Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax _

Re: [RE-wrenches] The perfect solar ready roof

2010-10-20 Thread Chris Daum
really do appreciate all your thoughts! And by the way, right NOW, sunny day time temps are near 70. Nights are a chilly 35..... Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun..

Re: [RE-wrenches] To insulate a battery bank DEPENDS on a lot offactors.

2010-12-12 Thread Chris Daum
to a low of forty below zero. It's not a big deal to add insulation as needed. Just seems like common sense. Chris Daum Oasis Montana Inc. 406-777-4309 _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz Se

Re: [RE-wrenches] SPAM-LOW: Re: Interfacing an Air 403 wind generator

2011-05-05 Thread Chris Daum
I'm with Bob-o on this one. I suspect if they had any indicator of the power it actually produced, they would be less in love with it. Chris Daum Oasis Montana Inc. _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of

[RE-wrenches] High Temp Batteries

2011-09-22 Thread Chris Daum
to use and replace). The MK AGMs are also only rated to 50C. Any ideas or alternatives would be appreciated. Chris Daum Oasis Montana Inc. 406-777-4309 ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options &

Re: [RE-wrenches] ARCO Solar and Carrizo Plain

2011-10-31 Thread Chris Daum
thing too. I do not know why ARCO scrapped what they did, but I suspect a corporate perspective was part of the scene. At the time, it did me and my then-customers good. After all, we know what PG & E really stands for. Just my 2 cents worth. Chris Daum Oasis Montana Inc. 406-777-4309 406

[RE-wrenches] LED availability

2011-11-09 Thread Chris Daum
Hi Folks: I am having difficulty finding a supplier for LED technologies. Anyone have a prospect? Feel free to contact me off list. Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax ___ List sponsored by Home Power magazine List

[RE-wrenches] dry battery issue

2011-11-14 Thread Chris Daum
e and expect I will not hear back from Surrette before I head out to check specific gravities tomorrow. I'm wondering what the procedure is for adding electrolyte to a battery so it can be added into a string? As always, appreciate the input. Chris Daum Oasis Montana Inc. 406-777-4309 406-77

Re: [RE-wrenches] squirrel problems

2009-05-19 Thread Chris Daum
We used to have a lot of (pine and ground) squirrel problems. Then we got a couple of cats. Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Nick Vida Sent

Re: [RE-wrenches] Chinese solar cells and modules

2009-06-06 Thread Chris Daum
five year warranty. We only want to offer UL listed products, so that leaves a lot of 'em out of the game. Chris Daum Oasis Montana Inc. 406-777-4309 www.oasismontana.com -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenche

[RE-wrenches] Trace DC 250

2009-06-17 Thread Chris Daum
Does anyone have the old enclosure, the DC 250, lying around anywhere? A fellow called me looking for one--and what he really needs is the motherboard, but he would take the entire unit. Please contact me off list, 406-777-4309. Chris Daum Oasis Montana Inc

[RE-wrenches] Desulfators

2009-06-18 Thread Chris Daum
o much for your information! Chris Daum Oasis Montana Inc. ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archi

Re: [RE-wrenches] module frame separation

2009-06-24 Thread Chris Daum
Not meaning to open up a can of worms, but along these lines, what do y'all think of the way Sharp frames are connected/sealed? Chris Daum Oasis Montana Inc. -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On B

Re: [RE-wrenches] Broken Modules

2009-08-04 Thread Chris Daum
A clear acryllic polymer can be purchased at a hobby store (i.e. one that sells model airplane stuff) that is cheap and readily sprayed on the surface. It will extend a broken module's life for some time, and as Ron pointed out, they make for good gifts to schools and science clubs. Chris

[RE-wrenches] Dealing with snow

2009-08-14 Thread Chris Daum
super icy. A little sun causes the snow to slip off rather easily. Chris Daum Oasis Montana Inc. -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Darryl Thayer Sent: Friday, August 14, 2009 3:01 PM To: RE-

Re: [RE-wrenches] Dealing with snow

2009-08-14 Thread Chris Daum
e-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Chris Daum Sent: Friday, August 14, 2009 2:08 PM To: 'RE-wrenches' Subject: [RE-wrenches] Dealing with snow Here in western Montana, I have my modules mounted at about a 45 degree

Re: [RE-wrenches] Seasonal Adjusters

2009-08-15 Thread Chris Daum
Hi William: I dunnoevery spring (here in western Montana) we usually have occasional winds in excess of ~80 mph.I think this ranks up there with roof-mounted wind gennies. Chris Daum Oasis Montana Inc. _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches

[RE-wrenches] Solar Christmas Goodies

2009-11-12 Thread Chris Daum
r my good customers and gifts in general. They seem a little higher quality than the 'green junk' that is so prevalent. Chris Daum Oasis Montana Inc. -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf

[RE-wrenches] Flowlight parts--brush replacement

2010-01-04 Thread Chris Daum
Dear folks: I have a customer without water due to needing a set of brushes for a Flowlight series 2920-24 pump (serial #082704). Does anyone happen to have a set? If you are willing to part with them, please contact me offlist. Thanks and happy new year! Chris Daum Oasis Montana Inc. 406

Re: [RE-wrenches] Obscure/obsolete QO breaker....

2010-01-09 Thread Chris Daum
eaker Q0260. If anyone's got one lying around the shop, please contact me off list. Thanks and have a great weekend! Chris Daum Oasis Montana Inc. 406-777-4309 ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.or

Re: [RE-wrenches] KD135 source?

2010-04-20 Thread Chris Daum
Yes, they are out of the KD135GXs and have the KD135SX-UPUs which have a junction box...and cost more. --Chris Daum Oasis Montana Inc. _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Warren Lauzon Sent: Tuesday, April 20

Re: [RE-wrenches] low voltage modules in high voltage applications

2010-04-27 Thread Chris Daum
and many of these folks (and unfortunately some if not many electricians) are pretty clueless. Just putting my thoughts about this out there. It would be very wise to avoid property damage or loss of life. Chris Daum Oasis Montana Inc. 406-777-4309 www.oasismontana.com -Original Message

Re: [RE-wrenches] Whats with Kyocera

2010-05-19 Thread Chris Daum
Sunwize may not be the cheapest but their service runs from good to doggone excellent. And they stock quite the variety of module sizes. Chris Daum Oasis Montaba Inc. _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jeff

Re: [RE-wrenches] SPAM-LOW: Re: Whats with Kyocera

2010-05-19 Thread Chris Daum
DAN FINK Buckville Energy Consulting LLC http://www.buckville.com/ Chris Daum wrote: > Sunwize may not be the cheapest but their service runs from good to > doggone excellent. And they stock quite the variety of module sizes. > > Chris Daum

[RE-wrenches] PV solar powered pond aeration compressor

2010-06-17 Thread Chris Daum
Check out Keeton Industries, http://www.keetonaquatics.com Good folks! Chris Daum Oasis Montana Inc. -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Dana Sent: Wednesday, June 16, 2010 6:54 PM To: &#x

[RE-wrenches] BIG dual axis trackers

2013-08-01 Thread Chris Daum
Dear people: Does anyone have a line on a really large dual axis tracker--something that would hold 25 or 30 modules in the ~250W range? I've seen some really big commercial units, but I have a client wanting a dual axis tracker that'll hold 25 of the Helios 255s. THANKS!

Re: [RE-wrenches] Security cameras for off grid home: Who has a low wattage solution?

2013-08-06 Thread Chris Daum
ideas for remote monitoring in a cost-effective manner. Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Jason Szumlanski Sent: Tuesday,

Re: [RE-wrenches] Sundanzer questions

2013-09-13 Thread Chris Daum
Wrenches: We've sold perhaps 10 of the Sundanzer fridges & freezers, with no complaints other than one customer with a broken handle (which he said was poorly designed). It was nearly a year to get a replacement. Best, Chris Daum Oasis Montana Inc. 406-777-4309 406-777

[RE-wrenches] Utilities see battery bank as parasitic load?

2013-09-24 Thread Chris Daum
d is anyone else running into this? It just seems crazy. Best, Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address &

Re: [RE-wrenches] Utilities see battery bank as parasitic load?

2013-09-24 Thread Chris Daum
ny of these guys? Got any clout with them? --Chris Daum Oasis Montana Inc. _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Brian Teitelbaum Sent: Tuesday, September 24, 2013 2:13 PM To: RE-wrenches Subject: Re: [RE-wre

Re: [RE-wrenches] Utilities see battery bank as parasitic load?

2013-09-24 Thread Chris Daum
solar.com/> www.positiveenergysolar.com On 9/24/2013 2:32 PM, Chris Daum wrote: Brian: The LADWP engineer (Tony Ramirez) advised the inspector (Brenden Owens) who told my customer (who, ironically, is retired from working at LADWP) that he couldn't have a straight battery-based syst

Re: [RE-wrenches] Utilities see battery bank as parasitic load?

2013-09-25 Thread Chris Daum
Well, does anyone know if the Power One Inverter will integrate with the Radian? Any special issues/considerations? We aren't getting a lot of information from the Power One folks..... Chris Daum Oasis Montana Inc. _ From: re-wrenches-boun...@lists.re-wrenches.org [mail

Re: [RE-wrenches] BP solar warranty contact etc.

2013-11-06 Thread Chris Daum
epped up to the plate. Thus, they've never been a desirable module to sell, IMO. GOOD LUCK. Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Beh

[RE-wrenches] Return on investment information

2013-12-10 Thread Chris Daum
? Besides the 30% federal incentive, there is also a one-time state tax incentive as well as a grant from the local utility Thanks as always for your brain power! Chris Daum, Oasis Montana Inc. 406-777-4309, www.oasismontana.com __

[RE-wrenches] Looking to replace a broken module

2013-12-17 Thread Chris Daum
Dear people: I have a fellow looking for a single BP SX 150 (actually 140); one got schmucked in his array. Anybody have one? Feel free to contact me off list. Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com

[RE-wrenches] Generator-Inverter system needs help

2013-12-30 Thread Chris Daum
. Thanks! Chris Daum Oasis Montana Inc. 406-777-4309 ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

Re: [RE-wrenches] Flickering LED lights on and Outback Dual 7248VFXsystem

2014-01-07 Thread Chris Daum
We have a variety of LEDs, cheap, expensive, etcetera -- but no dimmers. We have shown no sign of flickering in any of them off our Radian inverter. Chris Daum Oasis Montana Inc. _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On

Re: [RE-wrenches] Replacement for Whisper 500

2014-01-17 Thread Chris Daum
Check out Matt Tritt -- he's the Kestrel rep in the states now. windyma...@gmail.com He'll treat you right. Chris Daum Oasis Montana Inc. _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Nathan Stumpff Se

[RE-wrenches] Bergey Excel 1 wind generator issues

2014-02-19 Thread Chris Daum
of course there is no mention of this on Bergey's web site or in their XL.1 manual. I have several other XL.1s in the general area, but they are on their old 24V controller. So I am looking for more information on anyone who's using this 'clipper'. Please feel free to conta

Re: [RE-wrenches] Bergey Excel 1 wind generator issues

2014-02-20 Thread Chris Daum
in the area (with the old 24V controller) work fine. So I am trying to find a fix for my customer without having to spend ~$1200. That is the current (no pun intended) delimma. --Chris Daum Oasis Montana Inc. _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun

Re: [RE-wrenches] OutBack Power Radian Grid Zero GS4048A or GS8048A

2014-06-08 Thread Chris Daum
; they called my client's battery bank a 'parasitic load'! It's enough to drive you crazy. Chris Daum Oasis Montana Inc. -Original Message- From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Peter Parrish Sent: Sunday, June 08, 2014 11:39 AM

Re: [RE-wrenches] Lightning Damage - Need Replacements (Correction)

2014-06-15 Thread Chris Daum
s the location of this system? Sorry so much stuff burnt up. Lightning is a wierd beast, and it DOES strike twice or even more often in many locations. Chris Daum Oasis Montana _ From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of toddc...@finestplanet.com

Re: [RE-wrenches] 2v metal cased cells

2014-07-11 Thread Chris Daum
IBE (Industrial Battery Engineering) for one; 800-654-8889. They have a crap web site but are great batteries. Ask for Derek. -Original Message- From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz Sent: Friday, July 11, 2014 9:52 AM To: RE-wrenche

[RE-wrenches] Xantrex Prosine 1800/12 inverter w/ GFCI

2014-08-20 Thread Chris Daum
Anybody have one laying around they'd like to part with? My customer would prefer new if possible Please contact me off list. Thanks! Chris Daum Oasis Montana Inc. 406-777-4309 ___ List sponsored by Redwood Alliance List Address: RE-wre

[RE-wrenches] Grid-tie inverter for wind generator

2014-09-04 Thread Chris Daum
with batteries. Anyone got any ideas what inverter might work for him? Best, Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenc

Re: [RE-wrenches] Grid-tie inverter for wind generator

2014-09-05 Thread Chris Daum
Hah! What about Midnight Solar's Clipper? Still, combining that with a grid-tie inverter will undoubtedly be more than he wants to spend! Thanks for the input, Roy. Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com _ From: RE-wrenches [mail

Re: [RE-wrenches] Grid-tie inverter for wind generator

2014-09-05 Thread Chris Daum
ne's "controller"? To put that another way, are there just two wires coming out of the turbine, or three wires? Brian Teitelbaum AEE Solar From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Chris Daum Sent: Thursday, September 04, 2014 1:47 PM

Re: [RE-wrenches] Grid-tie inverter for wind generator

2014-09-06 Thread Chris Daum
: [RE-wrenches] Grid-tie inverter for wind generator Chris, I would not touch that with a20 foot pole. It will never work right and he will assign you the blame when he sees his electric bill go down by $1 per month. Larry On Sep 5, 2014, at 9:42 AM, Chris Daum wrote: One killowatt, and

[RE-wrenches] FW: Poletop rack with easy tilt change...anybody gotthat?

2014-09-08 Thread Chris Daum
Dear people: We've put up a couple of Jordan Solar's two-pole racks; easy to adjust, sturdy and nice-looking. The first pic on his website has a nice pic of the adjuster on a large array. http://www.jordansolar.net/ These folks are located in NW MT. Chris Daum Oasis Montana In

[RE-wrenches] Kyocera module - KC167 GT

2014-09-14 Thread Chris Daum
Anybody got one? If so, please contact me off list. Best, Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver

Re: [RE-wrenches] New Generation Bergey XL1 Tower oopsies?

2014-10-03 Thread Chris Daum
design problem, but adding the Clipper makes it a very costly installation. Just my 2 cents worth. TGIF, Chris Daum Oasis Montana Inc. _ From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of d...@foxfire-energy.com Sent: Friday, October 03, 2014 6:37 AM To: RE-

[RE-wrenches] SWRC for older Power Series inverter

2014-10-06 Thread Chris Daum
Dear people: Does anyone have the RC option for the old Trace power series inverter? I have a customer looking for one; you can't change any of the settings without it. Feel free to contact me off list. Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontan

[RE-wrenches] Spare SW4024 anyone?

2014-12-22 Thread Chris Daum
make. Feel free to contact me off list. Best, Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax <http://www.oasismontana.com> www.oasismontana.com ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrench

Re: [RE-wrenches] Spare SW4024 anyone?

2014-12-23 Thread Chris Daum
Thanks everyone! My electrician has like 5 leads for a good used SW4024. The wrenches come through again! Chris Daum Oasis Montana Inc. _ From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of All Solar, Inc. Sent: Monday, December 22, 2014 5:39 PM To: RE

Re: [RE-wrenches] Spare SW4024 anyone?

2014-12-23 Thread Chris Daum
Not looking for a repair, but a replacement. I know where they can be fixed. Chris Daum Oasis Montana _ From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Allan Sindelar Sent: Monday, December 22, 2014 4:58 PM To: RE-wrenches Subject: Re: [RE-wrenches

[RE-wrenches] 24V Zephyr Vent Fan from a Magnum MS4024PAE inverter

2015-01-07 Thread Chris Daum
Dear folks: Has anyone hooked up a battery vent fan, being turned on and off using just a Magnum MS4024PAE inverter? Is there some AUX output that can be used? Thanks as always for your help! Chris Daum Oasis Montana Inc. 406-777-4309 www.oasismontana.com

Re: [RE-wrenches] Sunwize or industrial PV modules

2015-02-24 Thread Chris Daum
Try AEE, 888-840-7191 You might have to go up to 90W --Chris Daum Oasis Montana Inc. -Original Message- From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Larry Sent: Tuesday, February 24, 2015 11:44 AM To: RE-wrenches Subject: [RE-wrenches] Sunwize or

Re: [RE-wrenches] Question on Back up generators

2015-04-21 Thread Chris Daum
Hi folks: Does anyone have a half dozen or so Kyocera 54 cell modules on hand? ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/opti

[RE-wrenches] Older Kyocera modules

2015-04-21 Thread Chris Daum
Hi folks: Does anyone have a half dozen or so Kyocera 54 cell modules on hand? 205's or 210/s, 54 cell modules? Also any smaller modules (60 - 80W range) that are 24V nominal? THANKS and feel free to contact me offlist. Chris Daum Oasis Montana Inc. i...@oasismontana.com 406-777

Re: [RE-wrenches] Kyocera modules

2015-04-23 Thread Chris Daum
Hi Sky: Do you have six and what would you want for them? Sincerely, Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com _ From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of s...@ecologicalsystems.biz Sent: Wednesday

[RE-wrenches] Looking for two Kyocera KD180GX-LP (or 185s)

2015-06-02 Thread Chris Daum
Hi folks: I have a customer looking for a pair to add to her array, and of course these have been discontinued for a while. Anybody got two? Feel free to contact me off list. Sincerely, Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com

[RE-wrenches] Seeking a single Sanyo module...

2015-06-17 Thread Chris Daum
...an HIP195BA5. Anybody got one? If so, please contact me off list. Thanks! Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org

[RE-wrenches] weather protection for PV

2015-08-05 Thread Chris Daum
ow of any such information or links? Please reply off list. Sincerely, Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com ___ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Chan

[RE-wrenches] AGS sensitive battery charger

2015-10-15 Thread Chris Daum
t the "device" (charger) will automatically turn on the (2-wire start) generator and charge the batteries. I am trying to avoid the cost of, say, a Magnum 4448PAE with its AGS module, and just get a voltage sensitive battery charger. Is this doable? Any ideas? THANKS. Chris Daum Oa

Re: [RE-wrenches] AGS sensitive battery charger

2015-10-15 Thread Chris Daum
ertified Advanced Tower Climbing, Safety & Rescue Wind/PV Design Engineer Windsine LLC 631-514-4166 www.windsine.org On Oct 15, 2015 6:15 PM, "Chris Daum" wrote: Dear people: I'm looking for an easy solution for battery charging off a generator, but trying to save the cost

Re: [RE-wrenches] Schneider XW repair out of warranty

2015-10-27 Thread Chris Daum
Abney Solar in Redmond, OR, 541-923-6000. If it can be fixed they can likely fix it. --Chris @ the Oasis Montana Inc. -Original Message- From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay Sent: Monday, October 26, 2015 4:16 PM To: RE-wrenches Subject:

[RE-wrenches] Tis the season

2015-12-01 Thread Chris Daum
Dear people: SO, is there any slick (hah!) product that makes snow accumulation on a solar array less likely to stick, or easier to slide off? As always, I appreciate your opinions. --Chris @ the snowy Oasis MT Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax

[RE-wrenches] Searching for a Trina 235

2015-12-28 Thread Chris Daum
Hi folks: I have a client searching for a silver frame Trina 235 (or something mighty similar). If you might have one available, please contact me off list. Best, Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com

[RE-wrenches] 5 Sanyo modules needed

2016-02-19 Thread Chris Daum
Dear people: If you have any of these available for sale, please contact me off-list: (modules in order of preference) HIP-190BA3 HIP-195BA3 HIP 200BA3 HIP-205BA3 HIP 190BA19 HIP 195BA19 HIP 200BA19 HIP 205BA19 Thanks and have a great weekend, Chris Daum Oasis Montana Inc. 406-777

Re: [RE-wrenches] Group thoughts on Power Perfect Box from StaticUSA

2016-03-24 Thread Chris Daum
n our stereo set-up! It was intolerable. Once removed, it was smooth as usual. Watch out for those magic boxes--they're really not so magical. Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com -Original Message- From: RE-wrenches [mailto:re-wre

[RE-wrenches] Battery charging problems

2016-04-21 Thread Chris Daum
ut will mean more run time for his generator (and hence, use more fuel). Have you ever heard of anything like this? Everything ran fund before the battery upgrade. Thanks for your input! Best, Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com __

Re: [RE-wrenches] Issue with DR1512 and oven

2016-09-20 Thread Chris Daum
Peerless Premier (www.premierrange.com) has offered battery-ignition ranges now for about two years -- no AC power required. They need an 8-pack of double A cells, and can also be match-lit if you don't want to fool with the batteries. Chris Daum Oasis Montana Inc. 406-777-4309 406-777-083

[RE-wrenches] gen-start module for the older SW5548+

2016-09-27 Thread Chris Daum
Dear people: I have a fellow with an older Xantrex inverter (SW5548+), and am trying to find him the GSM (generator start module) for it. Does any one have one they can part with, or know where I can get one? Please contact me off list if you do. Thanks! Chris Daum Oasis Montana Inc. 406

Re: [RE-wrenches] Solar World Wind Damage

2017-01-12 Thread Chris Daum
unted array on the Rocky Mountain front near Choteau, MT. Springs winds are not unusual with 150 to 175 MPH gusts. The system was installed in 2011 (with Sanyo 215W modules). No problems yet; we certainly over-engineered the racks, knowing what high winds there are! Chris Daum Oasis Montana I

[RE-wrenches] Remote option for older inverter

2017-01-30 Thread Chris Daum
Does anyone have a SW-RC (and 50' cable) for a Trace SW4024MC2 inverter? If you have one to part with, please contact me off list. Thanks Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com ___ List spon

[RE-wrenches] No more Enphase

2017-07-14 Thread Chris Daum
Fellow Wrenches: To make a long story short, we are done with Enphase. They've refused to reimburse us for labor after replacing a faulty inverter. So, what micro-inverters are you using successfully, and how is the tech support behind it? Feel free to contact me offlist. Best,

[RE-wrenches] Mitsubishi modules - need two

2012-01-12 Thread Chris Daum
Hi Folks: I'm looking for two of the UD175M5F. Ayyone know where I can get these? Please contact me offlist. Thanks! Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com ___ List sponsored by Home Power mag

Re: [RE-wrenches] small wind generators

2012-04-03 Thread Chris Daum
Hi Folks: A really great little wind genny is a 12V or 24V Chinook, manufactured to withstand Montana's harsh winter conditions. Check 'em out at http://www.chinookturbines.com/Home.html Best, Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasism

Re: [RE-wrenches] small wind generators

2012-04-04 Thread Chris Daum
on the product line (including their Whispers) as being unable to last through its warranty period without mucho problems. Are y'all telling me this has changed? Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax _ From: re-wrenches-boun...@lists.re-wrenches.org [mai

[RE-wrenches] Knowledgable person in or near Ketchikan, AK

2012-04-16 Thread Chris Daum
ct me off list. THANKS. Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/op

Re: [RE-wrenches] Solar product whole sellers with good reputation

2012-04-24 Thread Chris Daum
I'm a big fan of Sunwize, but then my rep is really good; don't know if everyone has a good rep. Hitney is also good. Best, Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:r

[RE-wrenches] FW: Wind Turbines killing birds and bats

2012-06-22 Thread Chris Daum
Hi folks: I don't mean to be the devil's advocate here, but my birder friend would like me to share the following info (from Chris at Oasis Montana) _ Yes, Bob is correct in that turbines are safer for birds now than they were 30 years ago, however, his cavalier attitude toward h

Re: [RE-wrenches] power washers

2012-11-24 Thread Chris Daum
eposited a significant amount of dust and ash on the modules. When I finally drug the hose up to the third story to rinse the modules off, they were amazingly clean. And my array output jumped appreciably. Best, Chris Daum Oasis Montana Inc. _ From: re-wrenches-boun...@lists.re-wr

Re: [RE-wrenches] DC, or not DC, Dat is Da question (Two Load Questions)

2012-12-11 Thread Chris Daum
The Sundanzers can be converted for AC use at the factory for a nominal cost, and they claim it affects efficiency very little. Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches

Re: [RE-wrenches] Wind Turbine sources?

2012-12-12 Thread Chris Daum
Jeremy: The XL.1 is now sold with the Classic controller, so a 48V Bergey XL.1 is quite a viable solution. Best, Chris Daum Oasis Montana Inc. 406-777-4309 -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf

Re: [RE-wrenches] Pilot Hole Template

2012-12-13 Thread Chris Daum
Well, the highest winds I have personally witnessed in Montana is 127 MPH. Just an FYI! We don't call them hurricanes, we just say"it's quite windy today." Best, Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax <http://www.oasismontana.co

Re: [RE-wrenches] Fridge recommendations?

2013-01-10 Thread Chris Daum
Not in western Montana this time of year! Chris Daum Oasis Montana Inc. _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Dean T. Newberry Sent: Wednesday, January 09, 2013 8:53 PM To: RE-wrenches Subject: Re: [RE-wrenches

Re: [RE-wrenches] Best racking systems (was Awkward Mid-clamps & jigs for installing or removing modules?)

2013-01-18 Thread Chris Daum
So how does the Zep stuff's testing do in winds in excess of 100 mph? I saw a nice demo and display of their goods in at the Anaheim 2009 SPI, but still am reticent to switch suppliers and modules to accomodate racking.... Chris Daum Oasis Montana Inc. _ From: re-wrenches

[RE-wrenches] Bergey XL1 and the Classic controller

2013-02-15 Thread Chris Daum
oes anyone have any 'in the field' that can comment on their performance with the Classic? I like the idea of field selectability of battery voltage but am wondering if there are any glitches.... Thanks, Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax

Re: [RE-wrenches] Whisper Parts

2013-04-05 Thread Chris Daum
Folks: I may be incorrect, but I think a company called Primus Windpower took over a chunk of SWWP - 928-607-7034. Good luck. Chris Daum Oasis Montana Inc. _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Ryan Sent

Re: [RE-wrenches] Whisper Parts

2013-04-05 Thread Chris Daum
ocal-turbines/article_316629 58-c28d-5af4-99ee-8f0e6f19f595.html Christopher Schaefer Solar & Wind FX, Inc. From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Chris Daum Sent: Friday, April 05, 2013 11:57 To: 'RE-wrenches'

Re: [RE-wrenches] outback fx series inverters

2013-04-13 Thread Chris Daum
So perhaps there needs to be some sort of independent test to confirm what these folks claim to feel. Chris Daum Oasis Montana Inc. _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Randy Brooks Sent: Saturday, April

[RE-wrenches] Old Solarex amorphous module

2013-04-26 Thread Chris Daum
Dear people: A fellow called today, looking to replace his piece-of-crap amorphous 43W 70V solar module. Anybody have something like that lying around? Please contact me off list. TGIF, Chris Daum Oasis Montana Inc. 406-777-4309 ___ List

[RE-wrenches] Faraday cages and EMP

2013-05-07 Thread Chris Daum
work? Thanks! Chris Daum Oasis Montana Inc. ___ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Change email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Arch

Re: [RE-wrenches] CFL lighting and the mercury hazard.

2008-12-09 Thread Chris Daum
ology if you want it to go on. Chris Daum Oasis Montana Inc. 406-777-4309 www.oasismontana.com _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Todd Cory Sent: Tuesday, December 09, 2008 6:58 PM To: RE-wrenches Subject: Re: [RE-wrenches] CFL lighting and the mercury h

Re: [RE-wrenches] Cable Sizing

2009-01-08 Thread Chris Daum
Some of this just puts me to sleep It's a blonde thing, I guess! -Original Message- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Peter Parrish Sent: Thursday, January 08, 2009 12:01 PM To: 'RE-wrenches' Subject: Re:

Re: [RE-wrenches] solar order scams

2009-01-27 Thread Chris Daum
p. We get several of these a day too, and I just delete them. I used to follow up, just to report their cards as stolen, but it's too time consuming. Let the seller beware! Chris Daum Oasis Montana Inc. 406-777-4309 _ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:r

  1   2   >