Yes, but how do you integrate a sensor with an Iota? And I don't think they make a 30A (or higher would be fine, he's got a bigass generator) 48V charger.... I got ears, but I've never heard of such a thing. It just seems like a damn shame to buy a big inverter when I just need a decent charger with an AGS module! But I'm not technically inclined enough to rig some voltage-sensitive relay, or the like. --Chris @ the Oasis MT
_____ From: RE-wrenches [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of b...@midnitesolar.com Sent: Thursday, October 15, 2015 5:29 PM To: i...@windsine.org; RE-wrenches Subject: Re: [RE-wrenches] AGS sensitive battery charger We are not really advocating doing this. It can cause nightmares in service and support. If one really knows what they are doing, it can be done (and has been done) but mere mortals should not be attempting to do this. I would get a real AC to DC charger. If IOTA isn't good enough, maybe Magnum's is ready or did I hear that the big "X" has had one or two of these for quite some time now ? Power factor corrected even ? boB On 10/15/2015 4:20 PM, Roy Rakobitsch wrote: The midnite classic 250 can do this fine. Rectify the generator 110vac to around 165vdc and feed into classic. Use Aux functions to start and stop generator based on battery voltage or SOC %. Roy Rakobitsch NABCEP Certified Small Wind InstallerR NABCEP Certified Solar PV InstallerR Certified Advanced Tower Climbing, Safety & Rescue Wind/PV Design Engineer Windsine LLC 631-514-4166 www.windsine.org On Oct 15, 2015 6:15 PM, "Chris Daum" <ch...@oasismontana.com> wrote: Dear people: I'm looking for an easy solution for battery charging off a generator, but trying to save the cost of a big inverter. I have a customer who needs to charge a 48V battery bank with a 30A charger off of a generator--but I need it to sense when the battery voltage is low, so that the "device" (charger) will automatically turn on the (2-wire start) generator and charge the batteries. I am trying to avoid the cost of, say, a Magnum 4448PAE with its AGS module, and just get a voltage sensitive battery charger. Is this doable? Any ideas? THANKS. Chris Daum Oasis Montana Inc. 406-777-4309 406-777-0830 fax www.oasismontana.com
_______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
