Not meaning to open up a can of worms, but along these lines, what do y'all think of the way Sharp frames are connected/sealed?
Chris Daum Oasis Montana Inc. -----Original Message----- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Doug Wells Sent: Wednesday, June 24, 2009 7:20 PM To: RE-wrenches Subject: Re: [RE-wrenches] module frame separation William, I have done the procedure before. I used RTV silicone. The hard part was cleaning out some of the old sealant in the frame. After seeing enough modules that look like they were sealed by preschoolers, you might end up with a longer lasting seal than the manufacturer. Doug Wells The Solar Specialists Morrisville, VT 05661 (p) 802-223-7014 (c) 802-498-5856 www.thesolarspecialists.com _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
