I'm with Bob-o on this one. I suspect if they had any indicator of the power it actually produced, they would be less in love with it. Chris Daum Oasis Montana Inc.
_____ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Bob-O Schultze Sent: Thursday, May 05, 2011 3:13 PM To: RE-wrenches Subject: SPAM-LOW: Re: [RE-wrenches] Interfacing an Air 403 wind generator Give it a resistor to work against and call it Kinetic Yard Art. Not worth much else... On May 5, 2011, at 11:15 AM, Peter Talmage wrote: Hi Dana, The battery and all associated equipment is being totally removed as the folks are now unable to do the required maintenance. They really love the little Air 403 and would like to interface it if at all possible even if it doesn't make economical sense. Peter --- On Thu, 5/5/11, Dana <d...@solarwork.com> wrote: From: Dana <d...@solarwork.com> Subject: [RE-wrenches] Interfacing an Air 403 wind generator To: "'RE-wrenches'" <re-wrenches@lists.re-wrenches.org> Date: Thursday, May 5, 2011, 1:32 PM The Air is DC, wouldn't it just feed the battery bank and there for less from the PV to the battery bank and therefore more PV to go to the grid tie... It is a mighty small unit to go to the effort to grid tie unless he has a 18MPH+ yearly wind speed. If he has that much wind go for a SWWP - Skystream wind turbine that is UL listed for grid tie. Dana Orzel Great Solar Works, Inc E - d...@solarwork.com V - 970.626.5253 F - 970.626.4140 C - 970.209.4076 web - www.solarwork.com "Responsible Technologies for Responsible People since 1988" Do not ever believe anything, but seriously trust through action. From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Peter Talmage Sent: Thursday, May 05, 2011 11:26 AM To: RE-wrenches Subject: [RE-wrenches] Interfacing an Air 403 wind generator I have a client with an independent power system who is going utility interfaced. We are putting the 24 volt arrays on Ephase inverters. He wants the Air 403 to be interfaced as well. Has anyone done this and if so, how ? Thanks Peter Talmage, P.E. Energy and Design -----Inline Attachment Follows----- _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org <x-msg://202/mc/compose?to=RE-wrenches@lists.re-wrenches.org> Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
