Hello Herbert,
youe were right with this one:
> > \topmargin 15mm
> > \rightmargin 20mm
> > \bottommargin 5mm
>
> it is impossible to place a pagenumber in a 5mm footer!
I set the bottommargin to 15mm and the pagenumber appeared!!! So it was all
the time there but in a way to much down as I would
On Sun, 22 Feb 2004, Herbert Voss wrote:
> >>by the way: do not use the font setting from inside LyX,
> >>it is deprecated. Write instead in the preamble:
> >>
> >>\usepackage[scaled=0.92]{helvet}
> >>\usepackage{mathptmx}
> >>\usepackage{courier}% luximono looks nicer here
> >
Hi Herbert
Since
Robert Neumann wrote:
I attached the files, created120 means created with Lyx 120, created 132 means
the file was created with lyx 132. It was exactly the lyx file I sent
already. Using lyx 132 I created two files: One using the "pdf" export
option, the other one using dvipdfm
there are several
Robert Neumann wrote:
I attached the files, created120 means created with Lyx 120, created 132 means
the file was created with lyx 132. It was exactly the lyx file I sent
already. Using lyx 132 I created two files: One using the "pdf" export
option, the other one using dvipdfm
\papersize Cust
Am Samstag, 21. Februar 2004 14:03 schrieb Herbert Voss:
> Robert Neumann wrote:
> > I attached a minimal file that shows the problem
> > It works perfectly with Lyx 1.2. with dvi and pdf.
>
> I cannot believe, please send the 1.2 LyX, log and
> tex file.
I attached the files, created120 means cre
Robert Neumann wrote:
I attached a minimal file that shows the problem
It works perfectly with Lyx 1.2. with dvi and pdf.
I cannot believe, please send the 1.2 LyX, log and
tex file.
\papersize Custom
why custom and not a4paper? Layout->Document->Paper
\topmargin 15mm
\rightmargin 20mm
\bottommar
t; It works fine with lyx 1.20
> > \usepackage {fancyhdr}
> > \fancyhead{}
> > \fancyhead[RO,LE]{\slshape Vorwort}
> > \fancyfoot[LE,RO]{\thepage}
> >
> > Now I changed to lyx 1.3.2 and when I export to ps or pdf, the pagenumber
> > in the footer is gone.
>
{\thepage}
>
> Now I changed to lyx 1.3.2 and when I export to ps or pdf, the pagenumber in
> the footer is gone.
> It is still there when I use dvi or dvipdf
> Does anybody have an explanation?
> Thanks Robert
My guess is that something has changed in your page margins or
> I have a file with fancyhdr and the followings commands in the
> preamble.
> It works fine with lyx 1.20
> \usepackage {fancyhdr}
> \fancyhead{}
> \fancyhead[RO,LE]{\slshape Vorwort}
> \fancyfoot[LE,RO]{\thepage}
> Now I changed to lyx 1.3.2 and when I export to ps or
Robert Neumann wrote:
I have a file with fancyhdr and the followings commands in the preamble.
It works fine with lyx 1.20
\usepackage {fancyhdr}
\fancyhead{}
\fancyhead[RO,LE]{\slshape Vorwort}
\fancyfoot[LE,RO]{\thepage}
Now I changed to lyx 1.3.2 and when I export to ps or pdf, the pagenumber
On Fri, 20 Feb 2004, Robert Neumann wrote:
> Hi,
> I have a file with fancyhdr and the followings commands in the preamble.
> It works fine with lyx 1.20
> \usepackage {fancyhdr}
> \fancyhead{}
> \fancyhead[RO,LE]{\slshape Vorwort}
> \fancyfoot[LE,RO]{\thepage}
>
> Now
Hi,
I have a file with fancyhdr and the followings commands in the preamble.
It works fine with lyx 1.20
\usepackage {fancyhdr}
\fancyhead{}
\fancyhead[RO,LE]{\slshape Vorwort}
\fancyfoot[LE,RO]{\thepage}
Now I changed to lyx 1.3.2 and when I export to ps or pdf, the pagenumber in
the footer is
Does anyone here have any experience using LyX 1.3.2 through an X-server?
I'm using Exceed (tried X-Win32 as well), and as usual, there are problems
with fonts. Even though I have installed the latex-xft-fonts both on my
local windows machine, and on the remote host, fonts display in LyX
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Jim Osborn wrote:
> I also tried using a custom layout, as I had done in LyX 1.1.5,
> with:
>
> Style Section
> MarginDynamic
> LatexType Command
> LatexName section
> ...
> Align Center
I have written this many time
Is there a way to center my Section headers in LyX 1.3.2?
The Layout->Paragraph gives a "centered" Alignment, but it seems to
have no effect, at least in an Article doc class.
I also tried using a custom layout, as I had done in LyX 1.1.5, with:
Style Section
MarginDynami
Robert Neumann schrieb:
> \fancyhead{}
>
> \fancyhead[RO,LE]{\slshape Vorwort}
>
> \fancyfoot[LE,RO]{\thepage}
>
> \cfoot{}
this is stuff which should completely go into the preamble.
Then you have no pagenumbers for dvi and pdf output.
But I want to have pagenumbers!
sorry, I meant
Then you have
> > \fancyhead{}
> >
> > \fancyhead[RO,LE]{\slshape Vorwort}
> >
> > \fancyfoot[LE,RO]{\thepage}
> >
> > \cfoot{}
>
> this is stuff which should completely go into the preamble.
> Then you have no pagenumbers for dvi and pdf output.
But I want to have pagenumbers!
Okay for the idea that it
Robert Neumann schrieb:
> Am Samstag, 15. November 2003 12:10 schrieb Herbert Voß:
>
>>Robert Neumann schrieb:
>>
>>>I am normally using Lyx 1.20, but I'm planing to switch to lyx 1.3.2.
>>>When I open a document which was created with lyx 1.20 using fan
Am Samstag, 15. November 2003 12:10 schrieb Herbert Voß:
> Robert Neumann schrieb:
> > I am normally using Lyx 1.20, but I'm planing to switch to lyx 1.3.2.
> > When I open a document which was created with lyx 1.20 using fanyhdr I
> > encounter a problem: When I use
Robert Neumann schrieb:
I am normally using Lyx 1.20, but I'm planing to switch to lyx 1.3.2. When I
open a document which was created with lyx 1.20 using fanyhdr I encounter a
problem: When I use the pdf preview or export function, the pagenumbers
(created with fancyfoot) were gone. I
Hello,
I am normally using Lyx 1.20, but I'm planing to switch to lyx 1.3.2. When I
open a document which was created with lyx 1.20 using fanyhdr I encounter a
problem: When I use the pdf preview or export function, the pagenumbers
(created with fancyfoot) were gone. If I'm usi
On Mon, Nov 10, 2003 at 07:42:07PM +0100, Holger Doerschel wrote:
> Hello,
>
> I tried to add a number to a formula with the the following: M-M n
>
> But nothing happens. The status-line says: Command disabled
THis only works for displayed formula (create/converted by S-C-m,
LaTeX's \[ or \eqna
Hello,
I tried to add a number to a formula with the the following: M-M n
But nothing happens. The status-line says: Command disabled
Any hint
regards
Holger
Hi Lorenzo!
I had exactly the same problems. The only solution I found, was to download
and to compile lyx 1.3.3 by myself.
Maybe this is a lyx-1.3.2/qt/SuSE bug.
Greetings
Christoph
On Thursday 30 October 2003 17:16, lorenzo wrote:
> Hallo everybody,
>
> I just installe
Hallo everybody,
I just installed the new distribution suse 9.0 with lyx 1.3.2 and qt 3.2.1 but
the math fonts do not work. free-ttf-fonts are installed, still all greeks
character and many symbol are not visible in math mode.
Anybody has an idea what has gone wrong?
Thanks a lot in advance
On Tuesday 09 September 2003 9:17 am, Andrew Criswell wrote:
> Hello All:
>
> I was able to successfully install and use lyx 1.3.1 on Mandrake 9.0 using
> the command,
>
> rpm -ivh --nodeps lyx-1.3.1-1mdk9-qt.i586.rpm
>
> However, if I try to install lyx 1.3.2 using
Hello All:
I was able to successfully install and use lyx 1.3.1 on Mandrake 9.0 using the command,
rpm -ivh --nodeps lyx-1.3.1-1mdk9-qt.i586.rpm
However, if I try to install lyx 1.3.2 using the command
rpm -ivh --nodeps lyx-1.3.2-1mdk91-qt.i586.rpm
it seems to go smoothly but when I attempt
Jaime Díaz-Deus Fernández wrote:
Hi. I use LyX 1.2.3 on a MK 9.1, installed from the distro CD,s. I want to
install LyX 1.3.2 with the file lyx-1.3.2-1mdk91-qt.i586.rpm, but I have the
error: "qt=2.2.1 is required for LyX 1.3.2_qt". My KDE is the version 3.1.0
and I don't unde
On Sat, Sep 06, 2003 at 12:58:40PM +0200, Jaime D?az-Deus Fern?ndez wrote:
> Hi. I use LyX 1.2.3 on a MK 9.1, installed from the distro CD,s. I want to
> install LyX 1.3.2 with the file lyx-1.3.2-1mdk91-qt.i586.rpm, but I have the
> error: "qt=2.2.1 is required for LyX 1.3.2_qt&q
Jaime Díaz-Deus Fernández wrote:
Hi. I use LyX 1.2.3 on a MK 9.1, installed from the distro CD,s. I want to
install LyX 1.3.2 with the file lyx-1.3.2-1mdk91-qt.i586.rpm, but I have the
error: "qt=2.2.1 is required for LyX 1.3.2_qt". My KDE is the version 3.1.0
and I don't unde
Hi. I use LyX 1.2.3 on a MK 9.1, installed from the distro CD,s. I want to
install LyX 1.3.2 with the file lyx-1.3.2-1mdk91-qt.i586.rpm, but I have the
error: "qt=2.2.1 is required for LyX 1.3.2_qt". My KDE is the version 3.1.0
and I don't understand why it's necessary to re
Christian Ridderström schrieb:
no, the compat2 option belongs to geometry to the default
setting of the paper layout, which was far different
in the old version 2.3
I don't understand what you mean?
What I mean is that the arguments that LyX passes to the geometry package,
assumes the old vers
On Thu, 28 Aug 2003, Herbert Voß wrote:
> no, the compat2 option belongs to geometry to the default
> setting of the paper layout, which was far different
> in the old version 2.3
I don't understand what you mean?
What I mean is that the arguments that LyX passes to the geometry package,
assume
Christian Ridderström schrieb:
On Thu, 28 Aug 2003, Herbert Voß wrote:
Thorsten Grothe schrieb:
Yes thank you very much! Putting compat2 in document settings solves the
problem!
but then you do not have a well installed TeX distribution
with up-to-date packages
I think this has more to do with
On Thu, 28 Aug 2003, Herbert Voß wrote:
> Thorsten Grothe schrieb:
>
> > Yes thank you very much! Putting compat2 in document settings solves the
> > problem!
>
> but then you do not have a well installed TeX distribution
> with up-to-date packages
>
I think this has more to do with the option
Thorsten Grothe schrieb:
Yes thank you very much! Putting compat2 in document settings solves the
problem!
but then you do not have a well installed TeX distribution
with up-to-date packages
Herbert
Matej,
Am Wed, 27 Aug 2003 22:53:20 +0200
Matej Cepl <[EMAIL PROTECTED]> schrieb:
> Post _short_ example which shows this problem and appropriate .dvi
> files(correct as well as wrong one).
See me prior posting, you only have to put compat2 into the gobal
document settings, do you want to have a
Am Wed, 27 Aug 2003 22:45:54 +0200
Christian Ridderström <[EMAIL PROTECTED]> schrieb:
> I have a vague memory that the problems with margins when using tetex
> 2 has to do with the new version of the geometry-package. I also think
> that there's an option 'compat2', that you can give to use the sy
On 2003-08-27, 18:09 GMT, Thorsten Grothe wrote:
> So I tried out testpage.tex and printed it out. Everything is fine! I
> just don't know what's wrong! Can anyone help me please?
Post _short_ example which shows this problem and appropriate .dvi files
(correct as well as wrong one).
Matej
--
M
I have a vague memory that the problems with margins when using tetex 2
has to do with the new version of the geometry-package. I also think that
there's an option 'compat2', that you can give to use the syntax of the
old version of the package. Have a look at the documentation for geometry
to
Hi all,
I'm using lyx 1.3.2 with tetex-2.0.1-22 and Suse 8.2. I set up my
margins to
left=3.5 cm
right= 2.5cm
top=2cm
bottom=2cm
I'm using the koma report class. I worked on the document in my company
and the margins are absolutly correct. (Lyx 1.3.2 Xforms-Version and
Suse 8.0,
Munzir Taha wrote:
> I received this from Mr. Lagally, the author of ArabTex: "Up to version
> 3.11 ArabTeX required a blank space before any control sequence within
> Arabic or Hebrew input text; this, as I was informed, led to problems in
> context of LyX.
> The new version 3.11, presently at CTA
Regarding this bug http://bugzilla.lyx.org/show_bug.cgi?id=1225
I received this from Mr. Lagally, the author of ArabTex: "Up to version 3.11
ArabTeX required a blank space before any control sequence within Arabic or
Hebrew input text; this, as I was informed, led to problems in context of
LyX.
Th
On August 20, 2003 01:16 am, Nirmal Govind wrote:
> > You're right! Unfortunately they don't use LyX, although I just got
> > the change tracking working last week, so there's opportunity to bring
> > them onside :).
>
> I guess so.. I'm trying myself to get some converts.. :-)
>
> > examiner, with
On August 19, 2003 10:36 pm, Nirmal Govind wrote:
> Hello Johnathan.. just curious - how exactly did you use the change
> tracking stuff.. I mean, was it just you making changes to your thesis
> and deciding, based on comments from your advisors I guess, as to
> whether to apply them? Or did your a
Hi fellow LyXers,
I've patched LyX 1.3.2 with John Levon's change tracking code. This is a
really nifty feature, so I wanted to get it working on the stable 1.3.2
release, which I used for writing my thesis. The patch is based on 1.3cvs
which doesn't have support for the QT. I
Janus Sandsgaard wrote:
On Wednesday 30 July 2003 02:57, Robin Turner wrote:
Bad spec file? Try it - you can always uninstall it if it doesn't work.
It seems to work just perfetc! I updated from LyX 1.2.x and I must say (among
other things) it is an improvement with the QT-integration. :-)
Ye
On Wednesday 30 July 2003 02:57, Robin Turner wrote:
> Bad spec file? Try it - you can always uninstall it if it doesn't work.
It seems to work just perfetc! I updated from LyX 1.2.x and I must say (among
other things) it is an improvement with the QT-integration. :-)
Now I just need to learn
Janus Sandsgaard wrote:
On Tuesday 29 July 2003 23:50, Robin Turner wrote:
Use urpmi with the "allow nodeps" option.
And this won't cause problems?
Why does it Ask for an old qt?
Bad spec file? Try it - you can always uninstall it if it doesn't work.
Robin
--
"There are other rules, but yo
On Tuesday 29 July 2003 23:50, Robin Turner wrote:
> Use urpmi with the "allow nodeps" option.
And this won't cause problems?
Why does it Ask for an old qt?
-j
--
Janus Sandsgaard
http://janus.dk
Hi
I have problems installing LyX 1.3.2 on my Mandrake 9.1.
I get:
[EMAIL PROTECTED] tmp]# urpmi lyx-1.3.2-1mdk91-qt.i586.rpm
installing lyx-1.3.2-1mdk91-qt.i586.rpm
Installation failed:
qt >= 2.2.1 is needed by lyx-1.3.2-1_qt
[EMAIL PROTEC
On Wed, 23 Jul 2003, Juergen Spitzmueller wrote:
> John Levon wrote:
> > http://movementarian.org/lyxqt
> >
> > (hopefully people can remember this url)
>
> It's also in the Wiki-FAQ now.
> http://ev-en.org/wiki/moin.cgi/LyxFAQ7
>
I think there's a typo in the URI above ('7' should be '/')... a
John Levon wrote:
> http://movementarian.org/lyxqt
>
> (hopefully people can remember this url)
It's also in the Wiki-FAQ now.
http://ev-en.org/wiki/moin.cgi/LyxFAQ7
Juergen.
On Wed, Jul 23, 2003 at 07:34:30PM +0200, Kai Johannes Keller wrote:
> installed LyX 1.3.2 no ERT is converted, and formulas look bad.
>
> Has anybody an idea how to fix this? Or does anybody have the same
> problem?
http://movementarian.org/lyxqt
(hopefully people can remember this url)
john
Hello List,
there's a problem with the greek letters and other symbols within LyX
1.3.2 (qt-version). I especially liked that LyX (if running in
"mathmode") immediately converts the LaTeX-Code (ERT) (e.g. \alpha) into
the the Greek letter. But since I've updated my Sy
Wes Meltzer wrote:
You probably need to make sure your LyX is compiled with JPEG support.
I used to have that problem all the time, aeons ago, when I was a
Linux/KDE 1.1 user (and when I used KLyX, RIP).
It seems your right I ran "lyx -dbg graphics" and there was no info
regarding jpg so it is p
cript library?
Wes :wm
On Mon, 07 Jul 2003 15:18:34 +0900, Jorgen Johansson wrote:
> Hello,
>
> I installed the Win32 qt LyX 1.3.2 and it is fast (compared to the cygwin
> version 1.3.0).
>
> I have a problem with on-screen images. png files are displayed, but jpg
> and ep
Hello,
I installed the Win32 qt LyX 1.3.2 and it is fast (compared to the cygwin
version 1.3.0).
I have a problem with on-screen images. png files are displayed, but jpg
and eps are not shown. I get the following error message displayed
instead of the images "error converting to loadable f
On Wed, Jul 02, 2003 at 01:14:11PM +0300, Munzir Taha Obeid wrote:
> Yeah! I understand the problem now. But can I argue that if we exclude some
> odd situations like te\TeX,..., it's considered good output to have
> formatting tags like center,... to be in a newline.
It is _really_ hard to get
On Monday 30 June 2003 7:42 pm, Jean-Marc Lasgouttes wrote:
> The problem is that this package implements something which is not
> really latex, but a subset of latex. For example, I may want to write
> te\TeX (name of a famous distribution). I arabic context, this is
> forbidden, and I shall write
On Friday 27 June 2003 12:28 pm, Jean-Marc Lasgouttes wrote:
> >>>>> "Munzir" == Munzir Taha Obeid <[EMAIL PROTECTED]> writes:
> OK, it would be easier to grab lyx-1.3.2.tar.gz from
> ftp.lyx.org/pub/lyx/stable/ and apply the patch to that.
Ok, I downlo
On Fri, Jun 27, 2003 at 02:41:26AM +0300, Munzir Taha Obeid wrote:
> On Tuesday 24 June 2003 12:56 pm, Jean-Marc Lasgouttes wrote:
> > Munzir, I do not know if you are able to apply this patch and rebuild
> > LyX, but I'd appreciate feedback on whether this fixes your problem.
> > PS: there is a sm
I am sorry just now I knew the thread spreaded between the devel and users
mailing lists and this is why I receive part of the messages only. I am going
to forward it again to both and try to keep an eye ;-)
On Tuesday 24 June 2003 12:56 pm, Jean-Marc Lasgouttes wrote:
> Munzir, I do not know if
On Tuesday 24 June 2003 12:56 pm, Jean-Marc Lasgouttes wrote:
> Munzir, I do not know if you are able to apply this patch and rebuild
> LyX, but I'd appreciate feedback on whether this fixes your problem.
> PS: there is a small unrelated change with the patch
Ok, I will be happy to try the patch an
After installing the Aqua LyX also parts of my Toolbar for the X11
version suddenly dissappeared.
Sorry, I mean Menubar, but actually from the toolbar as well.
Any ideas?
Best wishes,
-Jan
on of LyX-1.3.2 for MacOSX using the
Aqua interface. This version does not require X11, and has the look &
feel of other Aqua applications, including the menubar. To give the
Aqua version a try, see http://www.18james.com/lyx_on_aqua.html for
compilation instructions and links to the necessar
!!!
Best wishes,
-Jan
On Thursday, June 26, 2003, at 01:47 AM, Ronald Florence wrote:
I've just released a beta version of LyX-1.3.2 for MacOSX using the
Aqua interface. This version does not require X11, and has the look &
feel of other Aqua applications, including the menubar. To give
I've just released a beta version of LyX-1.3.2 for MacOSX using the
Aqua interface. This version does not require X11, and has the look &
feel of other Aqua applications, including the menubar. To give the
Aqua version a try, see http://www.18james.com/lyx_on_aqua.html for
co
I guess that the patch mentioned here will help you:
http://marc.theaimsgroup.com/?l=lyx-devel&m=105429291506720&w=2
Please confirm.
I think it will appear in 1.3.3.
JMarc
Mentioned patch doesn't help. I've got the same error.
Regards
wo
It won't. You'd have to run autogen.sh to regenerate the
[EMAIL PROTECTED] wrote:
>> wodz> Hello! I wanted to upgrade my lyx. I've read that lyx-1.3.2
>> can wodz> make some benefits of using xforms-CVS. So I downloaded
>> xforms wodz> (compiled smoothly) and lyx-1.3.2. Compilation of lyx
>> failed wodz> with s
> wodz> Hello! I wanted to upgrade my lyx. I've read that lyx-1.3.2 can
> wodz> make some benefits of using xforms-CVS. So I downloaded xforms
> wodz> (compiled smoothly) and lyx-1.3.2. Compilation of lyx failed
> wodz> with such errors:
>
> I guess that the
> "Andre" == Andre Poenitz <[EMAIL PROTECTED]> writes:
Andre> On Tue, Jun 24, 2003 at 02:59:41PM +0200, Jean-Marc Lasgouttes
Andre> wrote:
>> This means that the following code is not OK:
>> \begin{arabtex}abcd\foo{bar}\end{arabtex}
>>
>> So shall we add a space before each and every \foo{bar
>>>>> "wodz" == wodz <[EMAIL PROTECTED]> writes:
wodz> Hello! I wanted to upgrade my lyx. I've read that lyx-1.3.2 can
wodz> make some benefits of using xforms-CVS. So I downloaded xforms
wodz> (compiled smoothly) and lyx-1.3.2. Compilation of lyx fai
On Tue, Jun 24, 2003 at 02:59:41PM +0200, Jean-Marc Lasgouttes wrote:
> This means that the following code is not OK:
> \begin{arabtex}abcd\foo{bar}\end{arabtex}
>
> So shall we add a space before each and every \foo{bar} construct just
> in case arabtex is active??
Certainly not, as this breaks
[EMAIL PROTECTED] wrote:
> Hello!
> I wanted to upgrade my lyx. I've read that lyx-1.3.2 can make some
> benefits of
>
> using xforms-CVS. So I downloaded xforms (compiled smoothly) and
> lyx-1.3.2. Compilation of lyx failed with such errors:
This is a known problem
Hello!
I wanted to upgrade my lyx. I've read that lyx-1.3.2 can make some benefits of
using xforms-CVS. So I downloaded xforms (compiled smoothly) and lyx-1.3.2.
Compilation of lyx failed with such errors:
make[2]: Entering directory `/home/wodz/laptopek/lyx-1.3.2/src'
/bin/sh ../libt
> "Andre" == Andre Poenitz <[EMAIL PROTECTED]> writes:
Andre> On Tue, Jun 24, 2003 at 02:43:28PM +0200, Jean-Marc Lasgouttes
Andre> wrote:
>> I do not see how we could fix this. I do not think LyX should add
>> spaces all over the place just for the benefit of arabtex.
Andre> Not 'all over th
On Tue, Jun 24, 2003 at 02:43:28PM +0200, Jean-Marc Lasgouttes wrote:
> I do not see how we could fix this. I do not think LyX should add
> spaces all over the place just for the benefit of arabtex.
Not 'all over the place', but if \end{xxx} has xxx == arabtex perhaps?
Andre'
--
Those who desir
> "Munzir" == Munzir Taha Obeid <[EMAIL PROTECTED]> writes:
Munzir> ? -- A space at the end of the file won't solve the problem if
Munzir> it contains some formatting. For example if the tex file looks
Munzir> like this
Munzir> \begin{document} \begin{arabtext} \begin{center}ÈÓå
Munzir> Çääç\
Mandrake has specific rpm's for lyx 1.3.2, both mdk9.0 and 9.1
Use rpmdrake and specify an mdk-devel/cooker source for rpms. Like:
http://ftp.club-internet.fr/pub/linux/Mandrake-devel/cooker/i586/Mandrake/RPMS/
I have installed the above source of packages as an ftp server, don't
On Mon, Jun 23, 2003 at 10:22:05AM -0400, Mike Bourassa wrote:
> Hi there. When running the rpm, the installation fails with the message
> that the Qt version required is 2.2.1. Mandrk 9.1 has Qt 3. How do I
> work around this? TIA.
Try --no-deps?
Rebuild the src rpm?
Compile the .tgz your
Hi there. When running the rpm, the installation fails with the message
that the Qt version required is 2.2.1. Mandrk 9.1 has Qt 3. How do I
work around this? TIA.
majb
I want to emphasize it again. Bear with me, please.
---
There are two errors here:
Error #1: An error when we want to view a document that contains Arabic text
through view -> PDF.
LaTeX Error: \begin{arabtext} on input line 16 ended by \end{document}.
\end{document}
Am 19.06.03 18:46 schrieb(en) Albrecht Dreß:
Not really. Maybe I'll give gcc 3.2 a try, but I guess I should stay
with lyx 1.2.2 and forget about all those GREAT c++ extensions :-((
I can confirm that I could compile & run lyx 1.3.2 successfully with gcc
3.2.3 on my Yellowdog (Power
On Wed, Jun 18, 2003 at 06:58:52PM +0100, Raphael Clifford wrote:
> Thank you very much!
>
>
> I did the PPRenglish.sty -> PPRdefault.sty symlink and most of the
> errors disappeared :) Funny that google has 0 occurrences of
> PPRenglish.sty!
>
> When I create a file with only a title in it a
Hi,
Is there any way to change the font size in lyx with prosper. I have
tried layout->character then smaller but it doesn't seem to do anything.
This is in a theorem and proof slide if that makes any difference.
Cheers,
Raphae;
Christian Ridderström writes:
> On Fri, 20 Jun 2003, Nabil Hathout wrote:
>
> > > This file works for me...
> > >
> > > http://www.md.kth.se/~chr/lyx/examples/prosper/overlays/using_ERT_as_Weiss.lyx
> > >
> >
> > The latex compilation tell that
> >
> > ! Undefined control sequenc
On Fri, 20 Jun 2003, Nabil Hathout wrote:
> > This file works for me...
> >
> > http://www.md.kth.se/~chr/lyx/examples/prosper/overlays/using_ERT_as_Weiss.lyx
> >
>
> The latex compilation tell that
>
> ! Undefined control sequence.
> l.33 \ov
> {2}{
>
> is it possible to use the
Christian Ridderström writes:
> On Fri, 20 Jun 2003, Nabil Hathout wrote:
>
> > Hello,
> >
> > the overlays do not seem to work properly with John Weiss's layout. Has some
> > one tested or used them ?
> >
> > regards,
> >
> > --Nabil Hathout
> >
> This file works for me...
>
>
On Fri, 20 Jun 2003, Nabil Hathout wrote:
> Hello,
>
> the overlays do not seem to work properly with John Weiss's layout. Has some
> one tested or used them ?
>
> regards,
>
> --Nabil Hathout
>
This file works for me...
http://www.md.kth.se/~chr/lyx/examples/prosper/overlays/using_ERT_as_We
Hello,
the overlays do not seem to work properly with John Weiss's layout. Has some
one tested or used them ?
regards,
--Nabil Hathout
Hi,
To be honest, everything useful that I have found out has been done by
Christian who is also producing a fantastically helpful website.
http://www.md.kth.se/~chr/lyx/examples/prosper/readme.shtml
and
http://www.md.kth.se/~chr/lyx/examples/prosper/notes.txt
are the links that he gave me.
Che
On Thursday 19 June 2003 10:42 am, Juergen Spitzmueller wrote:
> Munzir Taha Obeid wrote:
> > ! LaTeX Error: \begin{center} on input line 11 ended by \end{document}.
> > Have I missed an obvious thing?!
>
> Does the error also occur if you add a paragraph in the standard language
> (english) at the
Raphael Clifford wrote:
I have been lurking on this thread for a while.
I have to give a presentation in July to UniForumNZ (topic LTSP: Linux
Terminal Server Project).
I intend to use the occasion as part of a LyX missionary effort.
My agenda consist of trying 4 approaches and choosing 1 of t
The problem with view->postscript clipping the image has been traced to
dvips using the "-t a4" option. This appears the break the postscript.
Here is a diff between the correct postscript file and the one made by
lyx with export->postscript.
> %%DocumentPaperSizes: a4
10c11
< %DVIPSCommandLine
On Thu, 19 Jun 2003, Raphael Clifford wrote:
> Things are going pretty well now. Here are some remaining problems.
>
> 1) view->postscript is oddly broken. If I export to latex and dvips and
> gv the file everything is great. However view->postscript shows the
> following effects.
Hmm, this so
On 2003-06-19, 16:48 GMT, Raphael Clifford wrote:
> Things are going pretty well now. Here are some remaining problems.
>
> 1) view->postscript is oddly broken. If I export to latex and dvips and
> gv the file everything is great. However view->postscript shows the
> following effects.
I suspect
Am 17.06.03 21:58 schrieb(en) Niklas Werner:
No problems with gentoo-1.4 on a PowerBook pismo either (gcc-3.2.3, qt
-3.1.2, glibc-2.3.2).
Xforms and qt both work.
Maybe upgrading the distribution will help? (gcc3 does a much better job
optimizing ppc-executables anyways)
O.k., I downloaded brand n
Things are going pretty well now. Here are some remaining problems.
1) view->postscript is oddly broken. If I export to latex and dvips and
gv the file everything is great. However view->postscript shows the
following effects.
a)You have to view the file in seascape instead of landscape to get it
On 2003-06-19, 13:57 GMT, Christian Ridderström wrote:
>> View->dvi gives no errors but also shows nothing. What I mean is that
>> the pages are completely blank. View->postscript on the other hand
>> works just fine.
I believe that it just the way it works---IIRC prosper uses some really
wild
1 - 100 of 132 matches
Mail list logo
