Re: KRnet> Gathering

Sometimes life changes get in the way and make us change our plans. Last night our house went under a sales contract after being on the market for a few months. Unfortunately the closing date set by the buyer is Sept 9th. Due to the closing and having to move, there is just no way I can make

KRnet> Oshkosh KR forum?

Rob, Any chance we could get an report on the Monday KR forum?  Attendance?  topics? Thanks, Larry Flesner -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet

KRnet> Oshkosh KR forum

I won't be attending Oshkosh this year but I'm wondering if there is a KR forum this year.  Date, time, location Larry Flesner -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet

KRnet> beautiful airplane

I opened up the e-mail from Kit Planes and when I saw this photo it was "WOW, what a beautiful airplane"!!  The flowing lines and the color!!! Larry Flesner Tom’s take on aviation tends to the impractical yet fun approach. -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/ma

KRnet> cataract surgery

Keep close tabs on your vision for the next year or so.  Following cataract surgery a couple of years ago, I developed scar tissue build up behind the new lenses. -Jeff Scott +++

Re: KRnet> Non-KR Work

On 7/10/2025 6:55 PM, Jeff Scott via KRnet wrote: For those that have been wondering where I've been for the last year, the last 8 months I stripped this plane down to bare bones, made numerous modifications to the airframe, Majored the engine, did numerous repairs to the wood in the wings, th

Re: KRnet> Brakes

On 7/2/2025 8:31 AM, mark jones via KRnet wrote: The left pedal has a good inch of depression. Is there too much fluid in the right system? Can air in the system cause a hard pedal? I thought air in a system creates a mushy pedal. Any help or ideas are much needed and appreciated. Mark Jones

KRnet> Diehl aeronautical

My first ride in a Kr was 35 years ago at the Gathering in Rough River, Kentucky with Dan Diehl.  I stumbled across something on YouTube about "ultralights" and in mentioned "Diehl".  I didn't know Dan developed a rather well performing ultralight called the XTC.  Here is some info on Dan's

KRnet> request to un-subscribe

I received a personal request from a list member to nu-subscribe them from the list.  Instructions for your list membership are posted at the bottom of every e-mail from the list.  Click and follow instructions. Thanks. Larry Flesner -- KRnet mailing list KRnet@list.krnet.org https://list.kr

Re: KRnet> Are You Attending the 2025 KR Gathering?

On 5/25/2025 11:51 PM, k...@bouyea.net wrote: Larry Flesner asked for an update to the KR Gathering and it’s just over 100 days away. +++ My "asking for an update" from John was actually more of a notice t

Re: KRnet> Propeller toque

On 5/25/2025 9:44 PM, Samuel Ajayi via KRnet wrote: I have never heard of stretching of AN bolts, let alone one on a critical component such as a prop. Were that the case, every one of the spam cans on the ramp ought to have replaced their prop bolts a few times by now. Most of them are flying

KRnet> recent storms

Several members on the net, in addition to having an interest in the KRs, own, are building, or flying the Kolb aircraft.  A violent tornado three days ago in the state of Kentucky (London,Kentucky) made a direct hit on the local airport. In addition to destroying the local emergency helicopt

Re: KRnet> memorabilia / Wings

Thanks to John Bouyea for locating the info on the KR belt buckles.  They were made and sold in the fall of 1978 and the design was based on the logo of the newsletter.  There may be as many as 149 besides mine that may be hiding out there in dresser drawers.  Having been around since the fir

Re: KRnet> collectors item

On 5/2/2025 9:49 AM, Mark Jones via KRnet wrote: Shoe polish? Haven’t done that in ages. I sense a bidding war!  Zach, would it be considered an acceptable wedding gift? I know your answer but I want Addie's opinion. 🙂

Re: KRnet> New Hoverhawk Propeller test flight

On 4/29/2025 12:08 PM, robert7721--- via KRnet wrote: New Hoverhawk Propeller (54x49L) test flight + Rob, How does this compare to the old prop, RPM & speed? Post again the size of the two props.  (54 X 49L) I'm a bit confused.  Prop size is

KRnet> new Propellor

On 4/28/2025 2:36 PM, Randall Smith via KRnet wrote: It’s definitely gonna be a different propeller. If they stay with the standard numbers for propellers. 54 is how long it is and 49 is how many inches it will pull through the air in one revolution. If your Edd sturba  did well, then this one

Re: KRnet> ads b cost today

On 4/7/2025 6:23 PM, Luis Claudio via KRnet wrote: Larry stop abusing us elders. My transponder is the KTX2. Siri corrected it to the radio number… damn Siri… Luis, I'm "your" elder by at least 10 years so I

Re: KRnet> Hangar friends

On 4/8/2025 6:18 AM, Zachary Martine via KRnet wrote: Survived the monsoons in Nashville Sunday and added an equally small friend to the hangar- 1976 MG Midget! The +++ Zach, Looks like a fun new

Re: KRnet> random thoughts / questions

On 4/7/2025 9:05 PM, Adam Deem via KRnet wrote: I took this today enroute from LAX to JFK at FL450 + You obviously weren't flying a KR !!  What were you flying, a Lear 45 or similar? Larry Flesner -- KRnet mailing list KRnet@list

Re: KRnet> ads b cost today

On 4/7/2025 5:48 PM, Luis Claudio via KRnet wrote: I paid $1975 for my Transponder w ADSB out Mode S. It is a new German compamy TQ KRT2-S-TQ. Weight less than an ounce. + Luis, Are you su

KRnet> random thoughts / questions

As there are zero posts on the net I'll send this out as a test message. While spending 6 hours monitoring my daughters flight from Los Angles to New York, non stop, on ADS-B exchange.com and Flight aware, I'm wondering what the odds are that she flew within one mile of directly overhead of h

KRnet> random thoughts / questions

As there are zero posts on the net I'll send this out as a test message. While spending 6 hours monitoring my daughters flight from Los Angles to New York, non stop, on ADS-B exchange.com and Flight aware, I'm wondering what the odds are that she flew within one mile of directly overhead of h

Re: KRnet> curiosity question

Phil, Any update on the big airshow?  Any KRs there? Larry Flesner -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet

Re: KRnet> curiosity question

On 3/26/2025 3:22 PM, Phillip Matheson via KRnet wrote: I’m with you Larry. GS. Tells me my speed and how long to my destination Phil. + To expand on the subject a bit, winds at altitude are not always as forecast.  Any time

Re: KRnet> curiosity question

On 3/25/2025 7:02 PM, Adam Deem via KRnet wrote: It comes out to 170 MPH TAS for the given conditions, provided indicated airspeed is accurate. Adam Deem +++ In the very few rare conditions with near zero wind at altitude, my ASI matched my ground s

KRnet> anyone flying?

Zach has been out flying the KR today.  He left us a note. Anyone else flying? https://www.flightaware.com/live/flight/N211LF/history/20250311/1516Z/KMDH/KMDH Larry Flesner -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet

Re: KRnet> Real gasket pushrod tubes o200

Zach, I hope the old girl runs so clean that you have to spritz a bit of oil on the belly now and then to remind yourself you're flying a Continental. 😂 Larry Flesner -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet

Re: KRnet> Need a Propellor and nose fork assembly.

On 2/24/2025 1:21 PM, robert7721--- via KRnet wrote: Looks like the original nose gear failed at the lower assembly.  The through-bolt sheared.  I am going to take it apart, but not sure I can fix it.  

Re: KRnet> New anti Lead additive called Decalin

I have been using Marvel Mystery oil for years but thought of it more as a valve lubricant than a lead reducer. Chris Gardiner +++ I didn't mention in my earlier post but besides putting a few extra oun

Re: KRnet> New anti Lead additive called Decalin

Chris, I have been using Marvel Mystery Oil for the same purpose for my VW engine for many years. Rob Schmitt N1852Z +++ I second the use of Marvel Mystery Oil.  I used it for 1300 hours in both Lycoming and Continental

KRnet> Experimental Aviation Hall of Fame

Netters, A nominating package has been submitted and received by the Experimental Aviation Association for the induction of Ken Rand and Stuart Robinson to the Homebuilder's Hall of Fame.  The nomination for induction was submitted on behalf of the world wide community of KR builders and fly

Re: KRnet> Ice landing

On 1/24/2025 5:32 PM, Rich Parker via KRnet wrote: Any KR's ever landed on the Alton Bay ice runway? I'm thinking of heading up there on Sunday. Rich Parker Greenfield NH + Rich,  Sounds exciting!  Let us know how it goes. Larry Flesner --

Re: KRnet> fuel filter location

On 1/24/2025 5:03 PM, Chris Pryce via KRnet wrote: I have an Andair Gascolator installed right before my two facet fuel pumps. I believe it is 70 microns. It caught a lot of foam dust from inside my wing tanks in the first 25 hours. I open and clean it out every oil change (25 hrs). Never had

Re: KRnet> Harley Davidson first flight

While on the internet this morning I stumbled across a video (very poor quality) that I never knew existed. It is the first flight of that 601 with the Harley. +++ I forgot to give the web site. https://www.youtube

KRnet> Harley Davidson first flight

Several months ago I mentioned doing the first flight on a Zenith 601 with a Harley Davidson engine back in 2003. While on the internet this morning I stumbled across a video (very poor quality) that I never knew existed. It is the first flight of that 601 with the Harley. A quick check show

Re: KRnet> Technically

On 1/20/2025 2:38 PM, Mark Jones via KRnet wrote: Technically, WunderBird made its first flight today. I did four high speed runs down 05 at KZPH today and on the third one she broke loose and flew about 30 yards. Getting there. 😀 Mark Jones +++

Re: KRnet> Tailwheel v trike and tractor

It was weird, I thought a baseball bat hit the fender then it hit again and again, with each blow I could feel my T shirt on my back puff puffing as the prop came around. After about 5 or 6 whacks I figured I was getting run over by an airplane so I accelerated away. I came out of it with not

Re: KRnet> Tailwheel v trike

On 1/16/2025 12:20 PM, John Gotschall via KRnet wrote: Pretty sure a tricycle gear wouldn't have done that . JG Probably not and glad you were no injured or worse.  A "competent pilot" wouldn't have done that either.  A tri-gear can compe

Re: KRnet> Tailwheel v trike

On 1/16/2025 11:08 AM, Larry Flesner via KRnet wrote: An real difficulties or major challenges in the ground handling of a "tail wheel" setup should more properly be blamed on a bad setup or piloting skills and not on the physical setup o

Re: KRnet> Tailwheel v trike

No. Never did. I love the nose wheel attitude on the ground. Makes life real simple. Mark Jones ++ An real difficulties or major challenges in the ground handling of a "tail wheel" setup should more properly be bl

KRnet> book sale

Anyone building an airplane of any design should own / use the Tony Bingalis set of builder books.  I've never seen them cheaper. https://shop.eaa.org/products/bingelis-set-of-four?_pos=5&_sid=19a07bb03&_ss=r Larry Flesner -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mai

KRnet> down under

A hotdog? Maybe a shirt? KR parts you've been waiting for? https://www.aircraftspruce.com/catalog/stpages/aus_grandopening.php?utm_campaign=USA%3A%20AUSTRALIA%20GRAND%20OPENING%20SALE&utm_medium=email&utm_source=newsletter Larry Flesner -- KRnet mailing list KRnet@list.krnet.org https://list.k

Re: KRnet> Weekly Photo. KR2

Tiekie, How may KRs do you currently own / fly?  You keep adding to the list. Larry Flesner -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet

Re: KRnet> Weekly Photo

Thanks to all that supplied an "adrenaline boost" to the net with recent photos.  They brought a bit of life back to the net and hopefully will get some builders back to the shop and some flyers back to the airport.  Lots of beautiful KRs hiding out there. Any projects out there in the proce

KRnet> request

When responding to a post, please consider " high light" and "delete" all  but a few lines you are responding to.  As the "clutter" on a  post grows it is easy to miss some of the info on the response, even photos at the bottom of the post. THANKS.. Larry Flesner -- KRnet mailing l

Re: KRnet> 20+ years ago

On 12/31/2024 9:02 AM, K W via KRnet wrote: Good aerial photo You probably flew right over my house in Plattsmouth Nebraska on your route from red Oak + Steve might well have done that as I recall he lived in the Co

KRnet> airport cameras

For all of you that still believe in Santa, check your airport security cameras for operation.  It's that time of the year again.  If you get any video, make sure to share it with the net. Merry Christmas to all and have a Happy New Year with lots of fun flying. Larry Flesner THE DAY BEFORE

Re: KRnet> electronic form?

Thanks for the feedback.  I stumbled through the search and found a one click that doesn't require me downloading Adobe.  On their site is an app that lets me click on a form, it converts, then downloads the completed form for my use.  It took about 15 seconds. I think I have what I need if

Re: KRnet> Kr materials

Jean-Charles. If the glass cloth that Colin suggested is not available locally, here is the material description for the "KR cloth" sold by A.S. eu.  Some local supplier might be able to match the clothe. 5.85 oz./sq. yd. Lightweight Boat or Tooling Cloth. Plain Weave. Thread Count 18 x 1

Re: KRnet> Bad news !!

On 11/26/2024 5:11 AM, JC via KRnet wrote: (I will have to find equivalents for the dynel, for example, which is completely impossible to find in France). +++ Try contacting    https://www.aircraftspruce.eu/

Re: KRnet> Bad news !!

 First: this looks to be the left outer wing panel based on the "one sided spar web". Larry Flesner +++ That should have read "spar sheer web. Larry Flesner -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.or

Re: KRnet> Bad news !!

On 11/25/2024 3:29 AM, JC via KRnet wrote: Bad news. I started checking the condition of the plane after storage and the news is not good, see picture. I'm afraid I'm heading toward a complete rebuild. JC +++ The p

Re: KRnet> Ring Termimals

On 11/14/2024 8:35 AM, Jeff Scott via KRnet wrote: What you are describing sounds like a Molex pin connector for the wire, but I can't find them with a ring connector with either Molex or Amp. I have switched to using the Molex Permaseal ring terminals. You crimp like the standard automotiv

Re: KRnet> (no subject)

On 11/9/2024 4:08 PM, David Henderson via KRnet wrote: there are no numbers published on the negative side, which leads me to question the legitimacy of the 9+ for the KR-1 and 7+ for the KR-2 on the positive side. Does anyone have any information about this? Thank you! Dave H.

Re: KRnet> Need expertise from the KR gurus

On 10/25/2024 5:16 PM, Adam Deem via KRnet wrote: My right wing, apparently in the stub wing makes a slight pop like there is something sticking and tension releasing when the wing is lifted and then pushed down again. ++

KRnet> another observation

I have a multi-page list of "Observations on Life".  Here is one based on 13 years of building and 20 years of flying that I'm very late in sharing.  "Flying is much more fun than building".  Get back to the workshop and get the project finished.  Although I've grounded myself, 211LF is still

Re: KRnet> Nidacore panels questions?

On 10/18/2024 10:38 AM, Oscar Zuniga via KRnet wrote: You mention not to hot-wire it as one limitation to working with it but I would add another: the stuff is very unforgiving of being bumped, scratched, or bent, and it demands that it be sanded very gently.  Once it's glassed, it's great- bu

KRnet> https://fgci.com/about-us/

This company might be of interest to current / future builders. https://fgci.com/about-us/ Larry Flesner -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet

Re: KRnet> Nidacore panels questions?

On 10/17/2024 10:13 AM, G R Pickett wrote: The Nidacore itself is polyethylene, with a polyethylene surface, onto which a non-woven polyester is bonded for adsorption of the resin.

KRnet> Nidacore panels questions?

What is the adhesion characteristics of the resin to Nidcore as it is "plastic"? Could Nidcore be covered one side only as is done with the foam on the wings. If I were to use Last-o-foam to build the wings, 1/2" covered one side only as plans call for, (I think I used 1" 30 years ago) , w

KRnet> registration information

If anyone that attended the Gathering met someone they would like to now get in contact with or would like to know  "who was the guy from xxx",  I have the registration forms that might have that info.  I've use them to contact several attendees and thought others might like some similar info

Re: KRnet> Inquiry About Acquiring the KR-2 Project

On 9/19/2024 1:25 PM, Márcio Erli via KRnet wrote: In Brazil, airplane engines are scarce, and importing them comes with extremely high costs. I would like to know how I can acquire the project. ++ Marcio, I

Re: KRnet> 2024 KR Gathering web page completed

Thanks John for all the photos and posting for our viewing.  Here is a larger image of Zach's efforts for those that haven't found it yet. My guess is that was done over 10 to 15 miles of sky.  I built that KR but Zach taught it how to write. 🙂 Chris did an even larger one several years ago

KRnet> KRs and guitars

KR's and guitars.  There's the start of a hook line for a song. I met a fellow builder at the Gathering this past weekend that has a house full of guitars and loves music.  If anyone on the net is a musician and looking for original material, contact me off net at fles...@frontier.com and I'd

KRnet> Lyrics

I got request for the lyrics from those unable to open the attachment.  This is not ideal but everyone that wants them can get them this way. Larry Flesner NO NEED TO CRY WHEN I’M GONE ¾ time, moderate speed Verse 1 ADA There’s a day I knows’ coming that’s the end of the line AE There’s

KRnet> contact?

Brian Law, e-mail me off net.   fles...@frontier.com Larry Flesner -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet

Re: KRnet> Gathering

On 9/16/2024 8:06 AM, Chris Pryce via KRnet wrote: I made it home yesterday in time for dinner. 12.7 hours of flying with two fuel stops. I had a great time seeing everyone. Can't wait for next year. Chris Pryce

Re: KRnet> Memorializing 2018 gathering

Thanks, Luis.  I think it will be obvious to all that no record deals or recording contracts resulted from that performance but we do enjoy hearing ourselves making musical noises.  It is always a bit hard to hear the lyrics over a P.A. so I'll attach them here so you can follow the bouncing

KRnet> Gathering

As the last one to leave the Mt.Vernon airport this morning I turned out the lights and locked the doors to secure it for next years Gathering.  Thanks to all that made the effort to attend and especially the pilots that flew their KRs to Mt.vernon for everyone see, enjoy, and learn from.  Th

KRnet> one more wake-up !!!

As my daughters used to say, "one more wake-up" and I'm off to Mt.Vernon.  I have my second truck load of Gathering items loaded, cloths packed, and I'm ready to boggy at sunup tomorrow.  Weather looks wet but several are already at Mt.Vernon.  We have one of the most standard plans-built KR

Re: KRnet> Gathering weather

For those attending the Gathering,  bring a bit of rain gear. Friday looks a bit wet.  Don't let the rain keep you from attending.  We can do everything scheduled indoors.  My only concern is if the KRs get weathered out.  Hopefully we get some early arrivals before the weather arrives. Fly

KRnet> Gathering weather

It looks like I spoke too soon on a good weather forecast for the Gathering.  I think the hurricane will bring a bit of rain.  For those flying to the Gathering, I just confirmed with Chris that hangar space will be available.  He said not to worry, he is looking forward to seeing everyone.

Re: KRnet> kr search

On 9/9/2024 1:17 PM, Tim Hoversten via KRnet wrote: FAA records show that Pete still owns it, and Pete is in Ogdensburg, WI.  Click the blue hot link below Aircraft Inquiry +

Re: KRnet> Ground loop Incident

On 9/9/2024 1:19 AM, Luis Claudio via KRnet wrote: My airplane now sits in my hanger till i have a chance to do a thorough inspection. My hip hurts like crap and I hope I can recover enough to make it to Mount Vernon. Luis ++

Re: KRnet> kr search

On 9/8/2024 5:18 PM, Todd Thelin via KRnet wrote: While stumbling around the web I was reminded of Pete Brautigam's KR N1436 +++ I ground looped that post big time.  I inquired about Pete Brautigan's KR and gave

Re: KRnet> Happi gauge

On 9/8/2024 10:50 AM, K W via KRnet wrote: Hello to everyone. I have a very erratic oil pressure gauge reading in the cockpit. Installed a connector T at the oil pressure port on my 2100 D and attached a direct reading gauge for verification. Direct reading gauge is very steady oil pressure w

KRnet> kr search

While stumbling around the web I was reminded of Pete Brautigam's KR N1436 that sold as long ago as 10 years and wondering where it is now.  Still registered in his name.  Beautiful KR I've never seen again.  Anyone know it's where it is today? Larry Flesner -- KRnet mailing list KRnet@list

Re: KRnet> KR2S nearing completion.

Hi Rene. I have uploaded a Video of the KR1 but it does not show on the krnet website. Do you maybe know why? I also completed a KR2S and would like to upload the pictures but hesitant as they dont show. +

KRnet> Gathering weather forecast

Here is the National Weather Service forecast for Mt.Vernon next weekend. 🙂 *Thursday* Mostly sunny, with a high near 88. Southeast wind 3 to 8 mph. *Friday* Mostly sunny, with a high near 84. Southeast wind 5 to 8 mph. *Saturday* Mostly sunny, with a high near 84. East wind 3 to 7 mph.-- KR

Re: KRnet> planned Gathering schedule

On 9/7/2024 3:14 PM, Larry Flesner via KRnet wrote: He has suggested that Chris Price take his place with Jeff Scott on Saturday to cover engines, I should have included that Mark recommended Chris be

KRnet> planned Gathering schedule

Here is the "Planned" KR Gathering schedule.  Hopefully those attending can leave with the greatest amount of knowledge and exposure to building and flying KR aircraft possible in such a short time.   As life is continually changing, so do the best laid plans.  I received word this morning th

Re: KRnet> Fwd: 50th Anniversary of the kR Video

Luis, there seems to be two videos on youtube on the 50 anniversary. The finished version and one at the following address.  Please check and delete this one. https://www.youtube.com/watch?v=K3U-LNdm3y4 Larry Flesner -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailma

KRnet> Fwd: 50th Anniversary of the kR Video

I recently became aware that the comment section of the 50th Anniversary video was restricted. Luis has corrected that.  You may now view and post a comment if you'd like. Larry Flesner + I am pleased to announce that I have turned on th

Re: KRnet> Fwd: Homebuilders Hall of Fame

On 9/4/2024 9:00 PM, G R Pickett via KRnet wrote: I’ll take this on, it really needs to be done. +++ Thanks Griff.  We can get input from the attendees at the Gathering next week. Thanks to everyone that has information to share. Larr

KRnet> search

Do we have anyone on the net that lives anywhere near Sonoma, California? I'm doing a search for Stuart Robinson, Ken's partner, and I think his last known location may be Sonoma.  Jeanette Rand has lost contact with him also but believes he moved to that area. If anyone lives close, send me

Re: KRnet> High impedance short - lessons learned

if you don't know what normal operation is you're not really troubleshooting, you're no different than a pig rooting for an acorn.  They often find the acorn but they also spend a lot of time rooting and find nothing. 🙂 +

Re: KRnet> High impedance short - lessons learned

On 8/30/2024 9:34 AM, John Gotschall via KRnet wrote: Hi all, I read something about an avionics power connection arcing upon contact during troubleshooting. +++ Something to support your observations, I

KRnet> Gathering items

Anyone booked at the Drury for the Gatheirng has probably received this but just in case.  I think this was mentioned when the reservation was made and is really not much of an issue. Second, I'm loading my P.A. system and will be making the 100 mile round trip  to Mt.Vernon this morning to

Re: KRnet> Recommended viewing

On 8/30/2024 12:15 AM, Luis Claudio via KRnet wrote: The nice thing about this project is that I can always go back and edit it and post a new update... simply email me with the correction. ++ https://www.youtube.com/watc

Re: KRnet> Recommended viewing

All that nitpicking, and not a one of you bothered to post a link so the rest of us out here enjoying the comments could actually go see what you all were bickering about. Cheers, Todd Thelin N825MW ++ https://www.youtube

Re: KRnet> Recommended viewing

On 8/29/2024 6:14 PM, Chris Pryce via KRnet wrote: I don't knowI'm super upset about the cruise and max speed numbers posted for my airplane. It's so much faster than that. Chris Pryce + S

Re: KRnet> Recommended viewing

Nice collection of KR photos . . . along with loads of mis-information.  Pictures mis-labeled for a variety of reasons.  This thing is a blight. Mike Stirewalt KSEE ++ That one line certainly

KRnet> Recommended viewing

If you are bouncing around on YouTube, watch the video "KR anniversary 50 years" to see all the amazing KR's from around the world.   Also, a number of KR Gathering videos are available also. A couple of short weeks and it happens again at Mt.Vernon.  Gas up the plane, gas up the car, kiss t

Re: KRnet> Freebird plans

On 8/28/2024 6:37 PM, Larry Flesner via KRnet wrote: Check out the KR 860. + For those technically challenged. https://en.wikipedia.org/wiki/Sukhoi_KR-860 🙂 -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet

KRnet> Freebird plans

Maybe we should set our sites a bit higher than Freebird.  Check out the KR 860. Larry Flesner -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet

KRnet> KR community challenge

Several days ago I mentioned the EAA "Homebuilders Hall of Fame" and wondered if Ken and Stu had ever been inducted and if not, why not.  Mike Simmons posted me off net with some info he researched and the nominating form.  I had a nice conversation with Jeanette Rand this afternoon and she e

Re: KRnet> Freebird plan

On 8/27/2024 11:24 PM, ROBERT HARTMAIER via KRnet wrote: I have the original KR-2 plans, and I agree that they are very basic and leave much to the knowledge and experience of the builder.  It seems to me that I saw on this site a reference to a later version, perhaps from around the late 1980

Re: KRnet> Freebird plan

I m very interesting by thé freebird. I would liké to know when it will bé available Best resgard from France Nicolas ++ Nicolas, Welcome to the KRnet.  Hopefully we will get an update on Freebird at the Gathering in the next couple of week

KRnet> EAA Homebuilders Hall of Fame

In one of the regular e-mails from the EAA was the following: EAA Introduces 2024 Sport Aviation Halls of Fame Class I was not aware there was a Sport Aviation Halls of Fame

Re: KRnet> Operation Sunbeam

Oscar, Congratulation on your new bird !!! I hope we get some update reports when you get it in the air. Larry -- KRnet mailing list KRnet@list.krnet.org https://list.krnet.org/mailman/listinfo/krnet

  1   2   3   4   >