I help out with a local charity regatta called Pirates on the Pungo.
http://www.piratesonpungo.org We are planning to do a couple of special
trophies this year, one of which will go to the C&C sailboat that finishes
first in the long pursuit race on the first day of sailing. While we plan to
hav
And does water come out of the faucet only after the delay or does the water
start right away?
Rich Knowles
Indigo. LF38
Halifax
On 2013-02-27, at 23:28, "Terry" wrote:
I open the faucet and the pump motor does not come on for 15 to 45 seconds...T
From: Joel Aronson
Sent: Wednesday, February
When I read your original post, Terry, I had the same question as Dennis:
Does your water system have an accumulator? Say a gallon size or larger?
The accumulator is recommended by Jabsco, and is intended to smooth out
pressure fluctuations (pulsing of the water flow) from the pump. But the
beh
I open the faucet and the pump motor does not come on for 15 to 45 seconds...T
From: Joel Aronson
Sent: Wednesday, February 27, 2013 5:31 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Water Pump delayed start
Terry,
Is the problem that the motor does not come on or that it comes on but n
Terry,
Does the fresh water system have an accumulator? If so, how big is it?
Does the manual specify a "dead band"? That is, the pressures at which the
pump kicks on and kicks off?
Did you open the faucet full flow? Did the water flow appear constricted?
Perhaps the combination of a large
I had that problem on a Swan I used to deliver; you turn on the faucet then
wait for the water. ..drove me up the wall, but never did figure out what
was the problem. Maybe a good idea to call Jabsco and talk to a tech, they
must have had that problem before. When you find out, please share with us
Bill, I thought that option was only available in the moraine version...
On Feb 27, 2013, at 6:05 PM, "Bill Coleman" wrote:
> It is assessing the pressure to see if it is in the kick-in range.
> You can adjust the fleeb setting inside the switch for the delay setting.
>
> Bill Coleman
> C&C
Terry,
Is the problem that the motor does not come on or that it comes on but no
water comes out?
Joel
Sent from my iPad
On Feb 27, 2013, at 7:05 PM, Terry wrote:
Model # 12884557
*From:* Rich Knowles
*Sent:* Wednesday, February 27, 2013 3:40 PM
*To:* cnc-list@cnc-list.com
*Subject:* Re:
No idea if you can wax over Penetrol.
Sounds like time for a test.
I just went out to the storage and found some Mother's Back to Black auto trim
polish. I put that and some Meguiar's Premium Marine Wax in my truck. Maybe
I'll give them a shot next week. Since I painted the boat, I don't n
Dennis,
A fellow C&C owner near me has the same year boat as mine but my toe rails are
faded and his look new. He told me he waxed them to stop the black streaks
running down the side of the hull. Wouldn't say what kind of wax, but his
looked like they were freshly and professionally painted. T
Title: HTML Message
Hi,Looks like Good Old Boat is looking for C&C 30 feedback , if some of you are interested..SylvainC&C27MkIII - Forwarded Message - From: Good Old Boat Magazine To: SYLVAIN LAPLANTE Sent: Wednesday, February 27, 2013 4:29 PM Subject: Two more boat reviews on the
Model # 12884557
From: Rich Knowles
Sent: Wednesday, February 27, 2013 3:40 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Water Pump delayed start
There are a number of versions of this pump including some automatic. What is
the precise model number, please!
Rich Knowles
Indigo. LF38
H
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
+ + + + 1
That's my plan...
David F. Risch
1981 40
(401) 419-4650 (cell)
> Date: Wed, 27 Feb 2013 18:38:39 -0500
> From: charliekilo...@gmail.com
> To: w...@wbryant.com; cnc-list@cnc-list.com
> Subject: Re: Stus-Li
There are a number of versions of this pump including some automatic. What is
the precise model number, please!
Rich Knowles
Indigo. LF38
Halifax
On 2013-02-27, at 19:24, "Terry" wrote:
It is a Jabsco par-max plus 12 volt.
From: Rich Knowles
Sent: Wednesday, February 27, 2013 2:56 PM
To: cnc
Wally's email reminds me of one more important tip I shared recently.
All the tips so far are about buying a particular boat. Before doing
that, I'd focus on find the nicest, most well equipped boat you can
afford, and buying that one (using all the advice provided so far).
Outfitting/re-fitting
It is a Jabsco par-max plus 12 volt.
From: Rich Knowles
Sent: Wednesday, February 27, 2013 2:56 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List Water Pump delayed start
What is the make and model?
Rich Knowles
Indigo. LF38
Halifax
On 2013-02-27, at 18:48, "Terry" wrote:
Hello, I have
That only applies to the HFP model.
Rich Knowles
Indigo. LF38
Halifax
On 2013-02-27, at 19:05, "Bill Coleman" wrote:
It is assessing the pressure to see if it is in the kick-in range.
You can adjust the fleeb setting inside the switch for the delay setting.
Bill Coleman
C&C 39
From: CnC-L
It is assessing the pressure to see if it is in the kick-in range.
You can adjust the fleeb setting inside the switch for the delay setting.
Bill Coleman
C&C 39 animated_favicon1
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Terry
Sent: Wednesday, February 27, 2013 5:
What is the make and model?
Rich Knowles
Indigo. LF38
Halifax
On 2013-02-27, at 18:48, "Terry" wrote:
Hello, I have just installed a new fresh water pump. The new pump does not come
on right way as it is supposed to, instead it takes 15 to 45 seconds for it to
start. I thought it was a faulty
Hello, I have just installed a new fresh water pump. The new pump does not come
on right way as it is supposed to, instead it takes 15 to 45 seconds for it to
start. I thought it was a faulty pressure switch so I took the first new pump
back and installed a second new pump. The same problem occu
How about satin black?
Gary
- Original Message -
From: Dennis C.
To: cnc-list@cnc-list.com
Sent: Wednesday, February 27, 2013 2:28 PM
Subject: Re: Stus-List Aluminum toerails - cosmetic improvement
Probably. It's worked on my binnacle cover for about 10 years. (Chrome
l
Looks like I'll take the easy (and cheap) way out and and keep the track.
Thanks guys!
Joel
35/3
The Office
Annapolis
On Wed, Feb 27, 2013 at 4:12 PM, Bill Coleman wrote:
> This is kind of like the grass being greener on the other boat,
>
> I have though how handy it would be to have tha
This is kind of like the grass being greener on the other boat,
I have though how handy it would be to have that track when I get into
spinnaker pole problems. Popping my babystay off is like releasing a chain
binder on a big rig. So, quite often (most often) is doesn't happen.
Bill Coleman
Joel
You already got a few answers on what it's used for (mast pumping,
bending the mast).
In case you didn't already pick this up...you (and I) have them because
our shrouds are in-line and not swept aft.
Even my old pearson had 2 sets of lower shrouds (one forward, one aft),
to stabilize the mid
Probably. It's worked on my binnacle cover for about 10 years. (Chrome looks
good but reflects too much sunlight.)
Dennis C.
Touche' 35-1 #83
Mandeville, LA
>
> From: Joel Aronson
>To: "cnc-list@cnc-list.com"
>Sent: Wednesday, February 27, 2013 1:05 PM
>Sub
Wouldn't Rustoleum in flat black work?
Joel
35/3
Annapolis
On Wed, Feb 27, 2013 at 1:49 PM, Dennis C. wrote:
> Rick,
>
> I used Penetrol for a while. Just wipe it on. Improves the looks for 2-4
> months.
>
> Been tempted to try black shoe polish or one of the automotive "black"
> trim polishe
Rick,
I used Penetrol for a while. Just wipe it on. Improves the looks for 2-4
months.
Been tempted to try black shoe polish or one of the automotive "black" trim
polishes.
Dennis C.
Touché 35-1 #83
Mandeville, LA
Sent from my iPhone
On Feb 27, 2013, at 11:16 AM, "Rick Brass" wrote:
>
Tom wrote:
> One last thing...listen to your heart...
> if she's your boat, she'll speak to you.
Colin wrote:
> Or, if the only concern is the engine,
> run it while the boat's still on the hard...
> Which is probably what I would do.
- - -
Well, I was going to spend a great deal of t
Some time ago there was a discussion about improving the appearance of our
black anodized aluminum toerails after they have been faded by sun, salt,
and use. I recall that several folks used some sort of liquid, commonly used
as a lubricant IIRC, that would enhance the black and make the toe rai
I walked away from a boat which had sea trialed quite nicely (not C&C). But,
when we hauled her my surveyor started with the moisture meter on her and I
went up the dock to the little boy's room. Came back and the surveyor was
sitting next to the boat. I was wondering if I was paying all that m
; <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20130226/aedab02d/attachment-0001.html>
>
> --
>
> Message: 8
> Date: Wed, 27 Feb 2013 07:02:06 -0500
> From: Andrew Burton
> To: "cnc-list@cnc-list.com"
> Subj
Joel, That's exactly right. I can't be sailing other people's boats all the
time, I'd never see my wife, dog, or boat!
On Wed, Feb 27, 2013 at 9:36 AM, Andrew Burton wrote:
> I hadn't. I'll ask Stu.
>
>
> On Wed, Feb 27, 2013 at 9:01 AM, dwight veinot <
> dwightvei...@hfx.eastlink.ca> wrote:
>
>>
I hadn't. I'll ask Stu.
On Wed, Feb 27, 2013 at 9:01 AM, dwight veinot wrote:
> ** ** ** ** ** ** **
>
> Andrew
>
> ** **
>
> Seems to me you have in a round about way found a captive audience where
> you can market your products and services…have you considered selling
> through the cncphot
Now we know what a delivery captain does between gigs!
Joel
On Feb 27, 2013, at 9:07 AM, Andrew Burton
wrote:
Looking forward to sailing next to you at the very least!
Andy
C&C 40
Peregrine
Andrew Burton
61 W Narragansett
Newport, RI
USA02840
http://sites.google.com/site/andrewburtonyach
Andrew
Seems to me you have in a round about way found a captive audience where you
can market your products and services.have you considered selling through
the cncphotalbum site chandlery?
Dwight Veinot
C&C 35 MKII, Alianna
Head of St. Margaret's Bay, NS
_
From: CnC-List [m
Looking forward to sailing next to you at the very least!
Andy
C&C 40
Peregrine
Andrew Burton
61 W Narragansett
Newport, RI
USA02840
http://sites.google.com/site/andrewburtonyachtservices/
+401 965-5260
On Feb 27, 2013, at 1:52 PM, "djhaug...@juno.com" wrote:
> Well Andy, You're pretty c
Well Andy, You're pretty close by and you're welcome aboard Lolita anytime!!
Hell, you could probably teach me a thing or two about her! I've only had her
out sailing about 5-6 times... DannyLolita1973 Viking 33Westport Point, MA
-- Original Message --
From: Andrew Burton
To
The Viking 33 was one of the first models I added when I bought the company in
99. I used to race on and La Brisa in the Northwest. I love that boat!
Andy
C&C 40
Peregrine
Andrew Burton
61 W Narragansett
Newport, RI
USA02840
http://sites.google.com/site/andrewburtonyachtservices/
+401 965-5
I make a 24 model. It's just not on the list, yet.
Andy
C&C 40
Peregrine
Andrew Burton
61 W Narragansett
Newport, RI
USA02840
http://sites.google.com/site/andrewburtonyachtservices/
+401 965-5260
On Feb 27, 2013, at 12:31 AM, Paul Baker wrote:
> *sigh*, no 24 half-hulls, the little-un of
39 matches
Mail list logo
