It is assessing the pressure to see if it is in the kick-in range. You can adjust the fleeb setting inside the switch for the delay setting.
Bill Coleman C&C 39 animated_favicon1 From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Terry Sent: Wednesday, February 27, 2013 5:49 PM To: cnc-list@cnc-list.com Subject: Stus-List Water Pump delayed start Hello, I have just installed a new fresh water pump. The new pump does not come on right way as it is supposed to, instead it takes 15 to 45 seconds for it to start. I thought it was a faulty pressure switch so I took the first new pump back and installed a second new pump. The same problem occurs. Any suggestions as to what the problem may be?? Terry Johnson S/V Ozymandias E-mail: tj...@comcast.net Website: www.tj622.com
<<image001.gif>>
_______________________________________________ This List is provided by the C&C Photo Album http://www.cncphotoalbum.com CnC-List@cnc-list.com
