You also have the problem with DR when it doesn't compress quickly
enough. The oldest problem - "you can't get a quart into a pint
pot!".
I don't use compression having taken over a department with all
compressed volumes and needing to restore serveral volumes without
being able to purchase new d
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On
Behalf Of CORP Rick Willmore
>Is there a TSM add on that is a centralized manager for the
>clients? Something along the lines of I can view all the TSM
>logs for each client in one place
Not as such. You can set up directory shares/fi
Run, don't walk, to AS3.0. The memory manager in 2.1 is a piece of
garbage and caused us all kinds of issues (super low performance and
out and out crashes) We also got interrupt stack overflows left and
right. All of this was fixed up in AS3.0. Make sure you set your
vm.pagecache in /etc/sysctl.co
It would be nice.
Joe Crnjanski - Partner
Infinity Network Solutions Inc.
Phone: 416-235-0931 x26
Fax: 416-235-0265
Web: www.infinitynetwork.com
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
CORP Rick Willmore
Sent: Thursday, December 02,
> Is there a TSM add on that is a centralized manager for the clients?
> Something along the lines of I can view all the TSM logs for each client
in
> one place
Nothing that I know of. TSM Operational Reporting gives you a lot of
useful information, but not the actual logs themselves. Some users p
16 = server-to-server library sharing session.
19 = session proxied through storage agent.
Regards,
Andy
Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development
Internal Notes e-mail: Andrew Raibeck/Tucson/[EMAIL PROTECTED]
Internet e-mail: [EMAIL PROTECTED]
The only dumb que
Luc,
I have this in my DSM.OPT file:
EXCLUDE "\...\master\...\log*"
Here is the output when I try to back up the log of master:
-
C:\Program Files\Tivoli\TSM\TDPSql>tdpsqlc backup master log
IBM Tivoli Storage Manager for Databases:
Data Protection for
Is there a TSM add on that is a centralized manager for the clients? Something
along the lines of I can view all the TSM logs for each client in one place as
well as be able to restore files from one place for all TSM clients without
logging into a web or gui on the client side?
R.
You got this message in GUI client; but scheduled backup works OK if you
exclude system state and system services.
5.2 client is compatible with 5.1 server.
This message is just informational; it tells you that you cannot backup
new features from Windows 2003 server. To backup system services yo
Hi All
I want to EXCLUDE the LOG BACKUP of the MASTER DB
I went in the dsm.opt file in the \TDPsql folder, and I removed the * in
front of the :
EXCLUDE "\...\master\...\log*"
EXCLUDE "\...\msdb\...\log*"
But it still try to take it
When there is a exclude , if I go in the SQL GUI and try
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On
Behalf Of Killam, Perpetua
>Is this possible? We have tsm server 5.2 running on solaris
>5.8 , client(nas filesystem mounted on this) is on 5.2 as
>well. Inspection time for 7 million files takes 18hours
>
>The backups are rather slow, s
On Dec 2, 2004, at 3:45 PM, Levi, Ralph wrote:
I just installed a tsm 5.2 client on a Windows 2003 box and get this
message.
ANS5186E Server is downlevel, System Services and System State backup
disabled for this session.
My TSM server is running 5.1.9 (AIX 4.3.3). I found a comment on
google
to u
That combination (5.2.x client on a 2K3 system) requires a 5.2.x TSM
server for System State backups (or whatever it is now called)!
I think this is in the README !
"Levi, Ralph" <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
12/02/2004 03:45 PM
Please respond to
"A
Here is the latest from the dsmerror.log
12/02/2004 14:33:04 (TSAFS.NLM 6.50.11 314) All resource names are
already scanned, or none were found.
12/02/2004 14:33:58 (TSAFS.NLM 6.50.11 314) All resource names are
already scanned, or none were found.
12/02/2004 14:33:58 (TSAFS.NLM 6.50.11 314) All r
I just installed a tsm 5.2 client on a Windows 2003 box and get this
message.
ANS5186E Server is downlevel, System Services and System State backup
disabled for this session.
My TSM server is running 5.1.9 (AIX 4.3.3). I found a comment on google
to use "backupregistry no" but that didn't help.
Is this possible? We have tsm server 5.2 running on solaris 5.8 ,
client(nas filesystem mounted on this) is on 5.2 as well. Inspection
time for 7 million files takes 18hours
The backups are rather slow, so I thought I split up the directories
into different schedules and run them at the same time
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On
Behalf Of Mark D. Rodriguez
>I have a Linux based ITSM server running RHAS 2.1 with ITSM
>5.2.2 server code. The ITSM server is an IBM X345 w/ 2 proc.,
>3GB memory, disk
>storage is on FASTt. There are a mix of Windows, Novel, and Lin
Anybody know what a client session type of 19 or 16
means for field 25 of dsmaccnt.log? The only thing
I've found regarding the fields of each line of
dsmaccnt.log is:
25 Client session type. A value of 1 or 4 indicates a
general client session. A value of 5 indicates a
client session that is ru
On Dec 2, 2004, at 1:43 PM, Mark D. Rodriguez wrote:
Hi,
I have a Linux based ITSM server running RHAS 2.1 with ITSM 5.2.2
server
code. The ITSM server is an IBM X345 w/ 2 proc., 3GB memory, disk
storage is on FASTt. There are a mix of Windows, Novel, and Linux
clients running ITSM 5.2.2. This
Hi,
I have a Linux based ITSM server running RHAS 2.1 with ITSM 5.2.2 server
code. The ITSM server is an IBM X345 w/ 2 proc., 3GB memory, disk
storage is on FASTt. There are a mix of Windows, Novel, and Linux
clients running ITSM 5.2.2. This is a new environment and we are still
working out the
The newer versions of tsafs also have a parmeter to set how much memory
is allowed to be allocated to the tsa's. I think it defaults to 25% of
total server
memory. Might want to try setting it a little lower each night until
your problem
goes away.
Troy Frank
Network Services
University of Wisc
When looking through the "readme" for 5.2.3.0, there is an entry that
describes your error message but it says to update your TSA modules (which
you have) as well as NW6.5SP1 (you are beyond this).
So, at least it recognizes the error !
Mark Hayden <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor
On Dec 2, 2004, at 11:45 AM, Mark Hayden wrote:
...ANS1028S Internal program error. Please see your
service representative
Mark - Check your client dsmerror.log and TSM server Activity Log
for further indications of the problem.
Richard Sims
I am getting ready to install 5.2.3 clietn this afternoon. Will keep you
postedDo you know of this issue with 5.2.2 with no patches?
>>> [EMAIL PROTECTED] 12/2/2004 11:20:25 AM >>>
Have you considered upgrading the client to 5.2.3.0 ?
Mark Hayden <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist St
Hi,
Trying to access my TSM client (5.2.3 on Windows XP Pro SP2) remotely via
Web Client. Have TSM Acceptor and Remote Client Agent services running on
client mycomputer.
Read Andy's message and reference to SP2 firewall. Have firewall on,
dsmcad exception enabled.
From remote client, http://myc
Have you considered upgrading the client to 5.2.3.0 ?
Mark Hayden <[EMAIL PROTECTED]>
Sent by: "ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
12/02/2004 11:45 AM
Please respond to
"ADSM: Dist Stor Manager" <[EMAIL PROTECTED]>
To
[EMAIL PROTECTED]
cc
Subject
Netware memory leak
We are ru
Whether this can or will work, depends on a couple things.
1. If the source node had compressed volumes, you generally MUST
restore to another node with compressed volumes.
Sometimes you'll get lucky and the file wasn't compressed
on the source node. In that case, it may work.
2. E
I am running TSM version 5.2.2.4 on aix. I have a 3494ATL using a library
manager. I have a volume with a label of Z00217. When I try to delete
this volume I get message ANR8443E.
The history of this tape is I had a tsm server installed on machine one,
named TSM1 and Z00217 was the latest TSM da
We are running TSM 5.2.2 on a NW 6.5 with SP2 We installed the TSA5up16
patch on as well. THis was done due to the Memory problems that were
abending the server. We still were having the leak. Yesterday we found a
tid (10095513) that had us load a newer version of TSAFS and SMSUT of
NLM's. (SMSUT u
Mark,
Saw your post from back in March about this but couldn't find any
replies. Any chance you remember what the fix was? I've just encountered
the same error ((TSAFS.NLM 6.50 333)An attempt was made to put
compressed data on non-compressed volume)) trying to restore some data
to a new (NSS) driv
When I regress my AIX server from 5.2.3.4 to 5.2.3.3 do I also have to
regress the AIX Storage Agents from 5.2.3.4 to 5.2.3.3? Can a 5.2.3.4
storage agent work with a 5.2.3.3. server?
David Ehresman
University of Louisville
hi all,
i keep getting this error whatever i do ...
i'm a unix man so my knowledge about drivers is not so good,
but as far as i can remember TSM device drivers are not intendet for
old school libraries such as this one, that means i have to use IBM
device drivers ... i did, many times ... trying w
Nope seems to work fine try
ftp://ftp.software.ibm.com/storage/tivoli-storage-management/maintenance/client/
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of
Jim Kirkman
Sent: Thursday, December 02, 2004 7:30 AM
To: [EMAIL PROTECTED]
Subject: IBM ftp si
Anyone else having a problem opening a data connection with
service.boulder.ibm.com? Can't seem to get to the client download site,
both yesterday afternoon or this morning.
--
Jim Kirkman
ITS Infrastructure
UNC-Chapel Hill
919-698-8615
we only perform full db
-Original Message-
From: Thomas Denier [mailto:[EMAIL PROTECTED]
Sent: December 1, 2004 4:56 PM
To: [EMAIL PROTECTED]; Killam, Perpetua
Subject: Re: tsm db extension
> Do I need to be aware of anything ?
>
> I already have the allocated logical volumes for tsm db
Hi to all
I tried to test the backup image (offline), my Tsm Client version is 5.2.3.4 on
Windows 2003 (one partition C:) and Tsm Server is 5.2.3.0. I didn't not
install the Tsm logical Volume Snapshot Agent.
I add in my dsm.opt file those lines:
INCLUDE.FS "C:" FILELEVELTYPE=DYNAMIC
INCLUD
36 matches
Mail list logo
